Search

In this study, we investigated the effect of various O 2 concentrations, from 20% to 90%, in nitrogen–oxygen ( N 2 / O 2 ) mixtures on the characteristics of secondary streamers. As oxygen molecules have different molecular characteristics from nitrogen molecules in terms of ionisation threshold and electron attachment property, streamer discharges generated under various nitrogen–oxygen ratios may exhibit differing characteristics such as electron density, electric field, and radical formation. We focused on the changes in these parameters in secondary streamers using simulations. Simulations were first performed under the same conditions as those in previous experiments to compare the results of the ozone production, discharge current, and discharge emission characteristics. To compare the ozone production characteristics, simulated O radicals–the precursor of ozone–were used in the simulation for simplicity. This comparison showed that, although the absolute values of each parameter were different, the simulation exhibited a similar trend in the case of the experimentally obtained oxygen concentration dependence. After the validity of the simulation was verified to some extent via a comparison with the experiment, the results obtained from the simulation were analysed in detail. The results showed that, although the electric field strength in the secondary streamer did not change much as the oxygen concentration increased, the decrease rate of the electron density was greatly accelerated by the electron attachment reaction of oxygen. As a result, many of the electrons had already dissipate during the development of the primary streamer, and few electrons remained when the secondary streamer was formed. This effect suggests that the ratio of the amount of O radicals produced in the primary streamer to that produced in the secondary streamer changes as the oxygen concentration changes. [ABSTRACT FROM AUTHOR]

This study evaluates the individual effects of electron‐impact ionization, attachment, and photoionization on streamer propagation to provide a deeper understanding of the streamer propagation mechanism and useful knowledge to obtain the best set of input data for verification and validation studies. The results show that streamers with higher electron‐impact ionization rates have higher propagation velocities and lower electric fields, while those with higher attachment rates have slower propagation velocities and higher electric fields. Streamers with higher photoionization rates have lower electric fields at the head, but the velocity remains largely unaffected. The effects of different rates of ionization, attachment, and photoionization have been analyzed using an analytical solution called the diameter‐speed relation. [ABSTRACT FROM AUTHOR]

The electric field induced second harmonic generation (E-FISH) technique has been widely utilized for the electric field measurement of atmospheric-pressure nonthermal plasmas. However, the measurement accuracy has not been quantified. Further, the E-FISH signal generation that is necessary to the evaluation of the measurement accuracy has been formulated only for the probe laser beam focused by a spherical lens and not for the cylindrical lens. Here, the E-FISH method utilizing the focusing cylindrical lens was studied for accurate one-dimensional (1D) electric field measurement of the primary-to-secondary transition phase of a single-filament positive streamer discharge generated in atmospheric-pressure air. A combination of numerical analysis and the E-FISH signal measurement was used to establish the radial distribution of the electric field vectors and the accompanying measurement accuracy. The E-FISH methodology captured a distinct evolution in the 1D electric field varying over timescales of ∼ 1  ns and length scales of 100  µ m. At the instant when the primary streamer arrived at the cathode, the electric field at 3 mm above the cathode surface was found to be as high as 225 Td, while the field at 10 mm above the cathode surface was as low as 5 Td. At the final stage of the primary-to-secondary transition phase completed in 3 ns from the primary streamer arrival at the cathode, the electric field at 3 mm above the cathode was found to be lower than that observed at 10 mm from the cathode; this finding is consistent with predictions made based on a previous model describing the initiation of the secondary streamer discharge and previously published electron density measurement. [ABSTRACT FROM AUTHOR]

This study investigates the effects of voltage rise rates from 0.1 kV ns−1 to 100 kV ns−1 on streamer discharge in air at atmospheric pressure using numerical simulation. The curvature of the needle electrode is also used as an input parameter to change the streamer inception voltage and the average voltage, Vave, during streamer propagation. The results show that the streamer propagation velocity, vpri, the electric field strength at the streamer head, Eh, the diameter of the streamer channel, and the O radical production characteristics during the primary streamer propagation are dependent on Vave. vpri and Eh exhibit different effects on Vave/d, where d is the gap distance of the electrode, which indicates that the streamer remains in the transient state from the filament-type discharge to the diffuse-type discharge. The comparison between the simulation and experimental results shows that the simulated vpri characteristics are in good agreement with the experimental results, regardless of the voltage waveform and electrode configuration, which indicates that Vave/d has a strong correlation with the primary streamer characteristics. [ABSTRACT FROM AUTHOR]