Search

Quenching from high temperatures has been identified as a useful means to enhance the piezoelectric properties and thermal stability of bismuth-based perovskite ferroelectrics. In the present work, it is demonstrated that quenching leads to improvement of depolarization temperature, ferroelectric and piezoelectric properties in Na 0.5 Bi 0.5 TiO 3 -NaNbO 3 (NBT-0.1NN) ceramics. In-situ synchrotron x-ray diffraction measurements indicated an irreversible transformation from cubic to coexisting cubic and rhombohedral phases during the application of a high electric field, for both as-sintered and quenched ceramics. These results confirm the non-ergodic relaxor ferroelectric nature of the materials. DC poling induced a transformation to single-phase rhombohedral structure in both cases, with highly textured domain configurations. These well-oriented ferroelectric domain states were relatively stable under subsequent bipolar electric field cycling. For the pre-poled NBT-0.1NN ceramics, the quenched samples were found to exhibit the highest intrinsic (lattice strain) and extrinsic (domain switching) contributions to electrostrain, due to the increased rhombohedral distortion. • High energy x-ray diffraction is used to analyse the structure of NBT-NN ceramics. • Coexisting cubic and rhombohedral phases are induced by an applied electric field. • Quenched samples have more rhombohedral phase and enhanced ferroelectricity. • DC poling results in transformation to a highly textured single rhombohedral phase. • Electrostrain is dominated by the intrinsic lattice strain mechanism. [ABSTRACT FROM AUTHOR]

• Domain switching and lattice strain in polycrystalline K 0.5 Bi 0.5 TiO 3 -BiFeO 3 -PbTiO 3 is evaluated by in-situ high energy synchrotron XRD. • The tetragonal {200} grain family exhibited the highest effective lattice strain up to 8.2 × 10−3 at an electric field of 5 kV/mm. • A partial phase transformation from tetragonal to rhombohedral occurred at high electric field levels, with an average strain of −1.54 × 10−3. • Relaxation of intergranular stress gives rise to enhanced domain switching in KBT-BF-PT ceramics. • The observed self-adapting mechanism could also be exploited in other high performance, high temperature piezoelectric ceramics. We report an in-situ synchrotron X-ray diffraction study of K 0.5 Bi 0.5 TiO 3 -BiFeO 3 -PbTiO 3 ceramics, which exhibit a T c of around 450 °C. The electromechanical actuation mechanisms comprise contributions from coexisting tetragonal and rhombohedral phases. The tetragonal {200} grain family exhibited the highest effective lattice strain, up to 8.2 × 10−3 at 5 kV/mm. Strong strain anisotropy in the tetragonal phase and field-induced intergranular stresses facilitate a partial transformation from tetragonal (high strain anisotropy) to rhombohedral (low strain anisotropy) at high electric field levels, with an average linear transformation strain of -1.54 × 10-3. The domain switching behavior was effectively enhanced in both tetragonal and rhombohedral phases after the phase transformation, due to the release of intergranular stress. This observed self-adapting mechanism in tuning intergranular stress through partial phase switching in the morphotropic KBT-BF-PT composition with large lattice distortion could also be exploited in other perovskite systems in order to achieve high performance high temperature piezoelectric ceramics. [ABSTRACT FROM AUTHOR]

Abstract A coherent core-shell structure in 0.24BiFeO 3 -0.56K 0.5 Bi 0.5 TiO 3 -0.20PbTiO 3 ceramics, with T m around 385 °C, was revealed using a combination of characterisation methods including scanning and transmission electron microscopy. The core regions consist of a cubic matrix with minor monoclinic phase with limited coherence length, while the shell regions are a tetragonal phase with characteristic long-range ordered ferroelectric domain structures. The electric field-induced strains for both core and shell regions were investigated by conducting an in-situ poling study using high energy synchrotron X-ray diffraction (XRD). A methodology is developed to evaluate both intrinsic (lattice strain) and extrinsic (domain switching) contributions for each phase based on diffraction peak profile fitting for multiple reflections. It is shown that there were no significant variations in the cubic and tetragonal phase fractions under an electric field in the range from −6 to +6 kV mm−1. An irreversible strain ∼0.04% was attributed mainly to ferroelectric domain switching in the tetragonal shell regions, while a reversible lattice strain ∼0.12% was identified in the pseudo-cubic core, leading to significant levels of intra-granular stress. Strain anisotropy, dependent on the crystallographic orientation of different grain families, was also evident. Macroscopic strain measurements, conducted using a novel digital image correlation (DIC) method, demonstrated the formation of typical 'butterfly'-type strain-electric field loops and were consistent with the total strain values calculated from the XRD results. Graphical abstract Image 1 [ABSTRACT FROM AUTHOR]

The structures and functional properties of Na0.5Bi0.5TiO3- xKNbO3 (NBT-xKN) solid solutions, with x in the range from 0.01 to 0.09, were investigated using a combination of high-resolution synchrotron X-ray powder diffraction (SXPD) and ferroelectric property measurements. For low KN contents, an irreversible transformation from cubic to rhombohedral phases was observed after the application of a high electric field, indicating that the polar nanoregions (PNRs) in the unpoled state can be transformed into metastable long-range ordered ferroelectric domains in the poled state. In contrast, the near-cubic phase of the unpoled ceramics was found to be remarkably stable and was retained on cooling to a temperature of −175°C. Upon heating, the field-induced metastable ferroelectric rhombohedral phase transformed back to the nanopolar cubic state at the structural transformation temperature, TST, which was determined as approximately 225°C and 125°C for KN contents of 3% and 5% respectively. For the field-induced rhombohedral phase in the poled specimens, the pseudo-cubic lattice parameter, ap, exhibited an anomalous reduction while the inter-axial angle increased towards a value of 90° on heating, resulting in an overall increase in volume. The observed structural changes were correlated with the results of temperature-dependent dielectric, ferroelectric and depolarization measurements, enabling the construction of a phase diagram to define the stable regions of the different ferroelectric phases as a function of composition and temperature. [ABSTRACT FROM AUTHOR]

(1 − x)Na 0.5 Bi 0.5 TiO 3 -xKNbO 3 (NBT-xKN) ceramics, with x in the range 0.01–0.09, were prepared by solid state reaction and conventional sintering. A progressive transformation from a nano-polar to a long-range ordered ferroelectric phase was observed after the application of a cyclic electric field with an amplitude of 5 kV mm −1 . It is shown by analysis of the crushed ceramic pellets, using high resolution synchrotron x-ray diffraction, that the application the cyclic electric field induced an irreversible transformation from a pseudo-cubic nano-polar phase to a rhombohedral ordered ferroelectric phase having R3c symmetry. Furthermore, a systematic variation, from 89.6° to 90°, was observed in the rhombohedral interaxial angle as the KN content increased from 1 to 9%. By comparing the structural evidence with the ferroelectric polarization-electric field hysteresis loops, it is shown that the electric field-induced transformation is partially reversible for NBT-5KN and completely reversible or nonexistent for NBT-9KN. [ABSTRACT FROM AUTHOR]

Abstract Distinctive structure-property relationships are revealed in the relaxor ferroelectric ceramic solid solution, (1-x)K 0.5 Bi 0.5 TiO 3 - xBiMg 0.5 Ti 0.5 O 3 : 0.02 < x < 0.08. The constructed phase diagram and results of in-situ synchrotron X-ray diffraction provide explanations for temperature and electric field dependent anomalies in dielectric, ferroelectric and electromechanical properties. At room temperature a mixed phase tetragonal and pseudocubic phase field occurs for compositions 0 > x ≤ 0.07. As temperature rises to ≥150 °C, the ferroelectric tetragonal relaxor phase changes to a pseudocubic ergodic relaxor phase; this change in length scale of polar order is responsible for an inflection in relative permittivity - temperature plots. The transition is reversed by a sufficient electric field, thereby explaining the constricted form of polarisation-electric field loops measured at >150 °C. It is also responsible for a change in slope of the strain-electric field (S-E) plots which are relatively linear in the ferroelectric regime i.e. at temperatures up to 150 °C, giving unipolar strains of 0.11% at 20 °C and 0.14% at 150 °C (50 kV/cm field). The additional contribution from the effect of the field-induced pseudocubic to tetragonal transition, generates strains of ∼0.2% at 185 °C. Unusual for a piezoelectric solid solution, the maximum strains and charge coefficients (d 33 = 150 pC/N, 20 °C) do not coincide with a morphotropic or polymorphic phase boundary. Graphical abstract Image 1 [ABSTRACT FROM AUTHOR]