Search

Ionized field strength on the ground level is one of the fundamental electromagnetic environment parameters of ultrahigh voltage direct current (UHVdc) transmission lines. An algorithm of an upstream boundary element method is presented in this paper to calculate the ionized field on the boundary with a high accuracy. The ionized field is generated and measured in an experimental platform with an HV conductor to a grounded cylindrical corona cage. The relations between ionized field strength and applied voltage, conductor position, and conductor diameter are investigated. Calculations show that the relative error of the ionized field on the HV electrode could be reduced to 0.1% when compared with the analytical solution. Ionized field distribution under the typical ±1100 kV UHVdc transmission lines is also analyzed as the application. [ABSTRACT FROM AUTHOR]

The corridor of the high-voltage direct current transmission lines in China is very complex and there may be buildings near the lines. The conductivity of the building material may influence the electric field in the building. In this paper, based on the upstream FEM, a method is proposed to solve the coupled problem of the ion flow field in the air and the current field in the building model. The numerical results coincide with the analytic results and measurement results. The electric field in and on the building model is analyzed considering different conductivities. [ABSTRACT FROM PUBLISHER]

The HVDC and HVAC transmission lines running on the same tower is a promising technology to improve the transmission capacity of an existing corridor. The ions generated by corona discharge of HVDC transmission lines will strengthen the ground-level electric field, which may endanger human exposure. To investigate how the presence of HVAC transmission lines changes the ion-flow field, experiments are carried out on an indoor test model with bipolar dc and three-phase ac lines. The experiment results are then compared with the simulation results. The experiment and simulation results show that the HVAC transmission lines have a shielding effect on the ion-flow field from the HVDC transmission lines running above. Finally, the ground-level electric field and ion current density of the \pm 800–kV HVDC and 500-kV HVAC transmission lines running on the same tower are calculated. [ABSTRACT FROM PUBLISHER]

A modified method based on the optimized charge simulation method (CSM) is used to predict the corona onset voltage and electric field when the space charges due to the corona are considered. Based on the streamer model of corona discharge, space charges generated near the conductors are predicted. In order to calculate the electric field at the conductor surface, space charges are replaced by some equivalent line charges near the conductor. Because of the existence of space charges, the corona onset electric field is changed a little. After a simplified model of actual power transmission lines is introduced with the help of rough coefficient, the corona onset voltage and corona onset electric field are calculated for different types of conductors finally. [ABSTRACT FROM PUBLISHER]

With the growing public awareness of environmental protection, the dc ground-level total electric field (TEF) is attracting increasing attention. Especially in high-altitude areas, it has become a key technical factor in deciding conductor types and the height of the transmission line. To determine the altitude effect and correction of the ground-level TEF for HVdc transmission lines, four short bipolar test lines with bundle conductors with the same parameters were built in China at altitudes of 50, 1700, 3400, and 4300 m. Using the test facilities, the dc ground-level TEF was measured over a long period of time, from Jan. 2010 to Nov. 2015. Through a statistical analysis of a large amount of data, the ground-level TEF characteristics of short bipolar test lines at different altitudes were obtained. By comparing the statistical results from different altitudes, it is determined that the dc ground-level TEF and corona inception field strength are linearly dependent on the altitude. Finally, the ground-level TEF and corona inception field strength altitude correction formulas of HVdc transmission lines are proposed. [ABSTRACT FROM AUTHOR]

Abstract: Making use of EMTP, the transient simulation of the currents along the towers and ground wires is performed when the lightning strikes the tower of the power transmission line. The investigation shows that the currents along the towers and ground wires dramatically decrease and can be ignored after 5 spans. And the effect on them for different impulse ground impedances, lightning current injection locations, tower spans, lightning wave impedances and so on are obtained when lightning strike on tower. With the help of Fourier transform, the method of moment is adopted to calculate the transient coating stress voltage of the pipeline and total electric field in the earth when the underground pipeline runs parallel to or crosses the power transmission line. The approximate formulas of the maximum coating stress voltage along the pipeline are proposed for the situation of crossing, which involve the lightning current, soil resistivity, pipeline models, tower grounding structure sizes and separation distance between the pipeline and tower grounding structure. Then, the proposed method can be used to evaluate the safety distance between the pipeline and tower grounding structure with the lightning electrical strength of the anti-corrosion coating of the pipeline. Eventually, if actual distance is less than the calculated value, modeling and analysis of protection measures in the pipeline can be carried out to protect the coating. [Copyright &y& Elsevier]