Search

The operation of wireless battery chargers at multiple switching frequencies may lead to a noticeable suppression of conducted and radiated electromagnetic interference (EMI) at the cost of decreased efficiency (mainly at lower load resistances) and increased peak and root mean square values of currents of power components of the wireless battery charger. Moreover, the reduction in conducted EMI is only moderate (<8.3 dB). Therefore, a novel approach based on modified resonant circuits and a modified control technique to obtain better reduction in the conducted and radiated EMI without significantly compromising other performance characteristics of the wireless battery charger is proposed and validated by using simulations and experiments. It is shown in this paper that the wireless charger operating at multiple switching frequencies with the proposed approach for the performance improvement has a more effective implementation of the four-switching frequency spread-spectrum technique with better conducted and radiated EMI reduction at all load resistances, lower values of peak and RMS currents at all load resistances, and higher efficiency in constant current mode and in the beginning of constant voltage mode (at lower values of the load resistances) than that of the conventional wireless charger operating at multiple switching frequencies. [ABSTRACT FROM AUTHOR]

The multi-switching-frequency technique is one of the spread-spectrum techniques for suppression of conducted emissions generated by wireless battery chargers. Its advantage is a relatively easy implementation with a microcontroller. In this paper, an original thorough experimental study of the effect of the multi-switching-frequency-based spread spectrum technique parameters (e.g., combinations of number of pulses, frequency order, etc.) on the performance characteristics (conducted emissions levels, efficiency, etc.) of an inductive-resonant wireless battery charger with a closed loop control is presented. It is shown that combinations of a number of pulses and frequency order have a noticeable impact on the performance characteristics of the wireless chargers. The suppression of the conducted emissions can be improved significantly by using optimized parameters of the technique. Moreover, it is proved experimentally that a relatively inexpensive microcontroller with a transceiver can be used to implement both closed-loop control of the wireless charger and the multi-switching-frequency technique. [ABSTRACT FROM AUTHOR]

The application of conventional spread spectrum techniques for conducted electromagnetic emission (EME) reduction in inductive-resonant wireless power transfer (WPT) systems may not reduce conducted EME enough due to specific frequency characteristics of the resonant systems and it can lead to some "adverse effects", mainly in terms of decreased efficiency. Therefore, in this paper, an improved spread spectrum approach, multi-switching frequency and multi-duty cycle (MFMD) technique, is proposed. The proposed approach can give a considerably better conducted EME reduction along with a better efficiency than the conventional spread spectrum techniques based on a multi-switching frequency scheme. In the proposed approach, the inductive-resonant WPT system can operate at multiple switching frequencies (e.g., three different frequencies) and for a part of a control signal with a specific switching frequency, there is a specific duty cycle. The technique can be implemented in a simple way using an inexpensive 8-bit microcontroller. The effect of the MFMD scheme on the conducted EME and efficiency of the WPT system is studied in detail. The WPT system conducted EME and the efficiency are studied experimentally with a designed laboratory prototype. The performance characteristics of the WPT system with the MFMD scheme are compared to those with the multi-switching frequency scheme and without the spread spectrum. The WPT system with the proposed spread spectrum technique has a better performance than that with the conventional spread spectrum technique. [ABSTRACT FROM AUTHOR]

Copyright of Telecommunications & Electronics is the property of RTU Publishing House and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)