Search

Mehdiabad is the world’s largest Mississippi Valley-type (MVT) Zn-Pb deposit (394 million tonnes [Mt] of metal ore at 4.2% Zn, 1.6% Pb) and contains significant barite resources (>40 Mt). Such large accumulations of barite are not common in carbonate-hosted Zn-Pb deposits. Therefore, the origin of the barite and its association with the Zn-Pb mineralization is of significant interest for further investigation. Field work and petrographic studies indicate that the Zn-Pb-Ba orebodies in the Mehdiabad deposit are hosted by Lower Cretaceous carbonate units of the Taft and Abkuh Formations. Fine- to coarse-grained barite with lesser siderite formed in three stages (S1, S2, and S4), along with a quartz-sulfide stage (S3) with minor quartz, sphalerite, galena, chalcopyrite, and pyrite, and the main Zn-Pb sulfide stage (S5) with massive sphalerite and galena. The barites have δ34S values from 17.7 to 20.6‰, δ18O values from 13.2 to 16.8‰, Δ33SV-CDT values from –0.001 to 0.036‰, and initial 87Sr/86Sr ratios from 0.707327 ± 0.000008 to 0.708593 ± 0.000008 (V-CDT = Vienna-Canyon Diablo Troilite). The siderites have δ13CV-PDB values from –3.8 to –2.7‰, and δ18OV-SMOW values from 18.2 to 20.9‰ (V-PDB = Vienna-Pee Dee Belemnite, V-SMOW = Vienna-standard mean ocean water). These geochemical data, and the barite morphology, point to a diagenetic origin for all stages of barite. We suggest that S1 and S2 barite precipitated from pore fluids at the sulfate-methane transition zone in a methane-diffusion-limited environment with increasing methane content. S4 barite precipitated when the methane- and barium-bearing cold-seep fluid migrated to the shallow carbonate sediments and formed a methane-in-excess setting. For the three stages, the SO42- in barite came from the residual SO42- in pore fluids undergoing sulfate-driven anaerobic oxidation of methane, and the Ba2+ came from dissolved biogenic barite and terrigenous materials in the Taft and Sangestan Formations. Primary fluid inclusions trapped in S3 quartz have salinities of 5.6 to 8.1 wt % NaCl equiv and homogenization temperatures of 143.8° to 166.1°C. The quartz has δ18OV-SMOW values ranging from 9.8 to 22.5‰ and δ30Si values from –1.3 to –0.9‰. These data indicate hydrothermal fluid flow occurred between the diagenetic S2 and S4 events. Secondary fluid inclusions with salinities of 17.70 to 19.13 wt % NaCl equiv and homogenization temperatures of 123.0° to 134.0°C are found in the S3 quartz, too. They might represent the hydrothermal event formed by basinal brines in S5. According to the ore textures and the comparison of the sulfur isotopes between S5 Zn-Pb sulfides and the digenetic barites, the barite provided a host and a sulfur source for the later Zn-Pb mineralization. The relationship between barite and the Zn-Pb mineralization indicates that significant accumulations of sulfates may be a critical exploration target for this kind of giant deposit.

Jinding is the third-largest known Mississippi Valley-type (MVT) Zn-Pb deposit. It is hosted by a dome containing a suite of complex breccias and sandstones with abundant gypsum and anhydrite. This study presents the results of new geologic mapping of the Jinding open pit and discusses the geology of the deposit in detail. Our new data support a previously proposed model where the deposit is hosted in an evaporite dome created by the diapiric migration of Late Triassic evaporites during Paleocene thrust loading. Nearly all of the mineralization in the deposit is hosted by evaporite diapir-related rocks, including diapiric breccias and laterally extruded material mixed with fluvial sandy sediments (limestone clast-bearing sandstones) and overlying gypsum-sand diapiric units (mainly clast-free sandstones). The new mapping determined that the currently light gray colored sandstones within the Jinding dome were originally red, with the bleaching being a response to calcite and pyrite alteration as a result of pre-ore interaction with hydrocarbons. The bleached sandstones host sphalerite and galena that replaced calcite, and Zn-Pb sulfides also occur in limestone breccias and gypsum-rich rocks as a result of replacement and open space-filling mineralizing processes. The Jinding deposit demonstrates that MVT Zn-Pb mineralization can be hosted by a variety of evaporite diapir-related rocks and indicates that dome structures and the presence of pre-ore hydrocarbons are both important for the formation of Zn-Pb mineralization.

This study evaluates the effect of organic matter impurities on pyrite Re-Os dating, using the giant Jinding sediment-hosted Zn-Pb deposit in China as an example. The Jinding deposit is hosted in a Paleocene evaporite dome that was a hydrocarbon reservoir before mineralization. Pyrite in Jinding formed in two stages: pre-ore (py1) and syn-ore (py2). Two types of py1 are recognized, organic matter-free and organic matter-bearing. The organic matter-free py1 contains homogeneously distributed low concentrations of Re (

The Angouran deposit is the second-largest Zn–Pb deposit in Iran with 4.7 Mt sulfide ore (27.7% Zn, 2.4% Pb, and 110 g/t Ag) and 14.6 Mt nonsulfide ore (28.1% Zn, 4.4% Pb). Various models have been proposed to explain the genesis of sulfide ore in this deposit. Moreover, the mineralization type of its primary sulfide ores remains controversial. The major and trace element concentrations and sulfur isotopic composition of the two stages of sphalerite have been analyzed to constrain mineralization conditions and the genesis. The Angouran deposit, which contains discordant orebodies, is hosted in a Neoproterozoic/Cambrian schist-marble sequence. Two stages of sphalerite have been distinguished: early-stage (S1) red-brown sphalerite and late-stage (S2) honey-yellow sphalerite. Our result shows that, relative to the S2 sphalerite, the S1 sphalerite has higher contents of Fe, Mn, Co, Cu, Ag, Sn, Ga, Sb and In, but lower contents of As and Tl. Time-resolved depth profiles in these sphalerites determined by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses indicate that Fe, Cd, Co, Hg, Mn, Ge, and In are mainly present in solid solution and that Ag, Cu, Pb, As, Ni, Ga, Tl, Sb, and Sn are present in both solid solution and mineral inclusions. Correlation analyses reveal the occurrence of direct substitution mechanisms, such as Zn2+ ↔ (Fe2+, Cd2+) and 2Zn2+ ↔ Ge4++□ (vacancy) as well as coupled substitutions, such as 2Zn2+ ↔ Cu+ + Ga3+, 2Zn2+ ↔ (Cu+, Ag+) + Sb3+, 3Zn2+ ↔ Pb2+ + Tl+ + As3+, 4Zn2+ ↔ Pb2+ + 2As3++□(vacancy) or (Zn2+, Pb2+) ↔ Tl+ + As3+, and 4Zn2+ ↔ Cu+ + (Ga3+, In3+) + Sn4++□(vacancy). Geothermometer studies suggest that sphalerite in the Angouran deposit precipitated from a low-temperature (

The investigation of epigenetic carbonate-hosted Pb-Zn deposits from China and Europe in the Eastern and Western orogens of the Tethyan Domain, have provided a new perspective on the range of processes operating in this deposit class globally. However, improved metallogenic models require new constraints on the timing of mineralization throughout the Domain. To address this need, we applied Re-Os pyrite dating to the world class Irankuh Zn-Pb deposit, Iran. The Irankah deposit is located in the thrust belt of the Malayer-Esfahan Pb-Zn Metallogenic Belt (MEMB) in the Zagros Orogen, Iran. Mineralization is hosted by the Goushfil Main Fault and adjacent dolomitized limestones. The hydrothermal mineral assemblage comprises sphalerite, galena, pyrite, minor chalcopyrite and sulfosalt minerals, together with dolomite, barite and abundant quartz. Pyrite associated with main-stage sphalerite mineralization has low concentrations of 3 to 37 ng/g Re and 6 to 49 pg/g Os that are typical of low-level highly radiogenic (LLHR) sulfides. Nonetheless, vein and replacement pyrites from the Goushfil orebody yielded a 5-point isochron age of 66.5 ± 1.6 Ma that is interpreted as the main Zn-Pb mineralization age. The new mineralization age confirms an epigenetic origin for the Irankuh Zn-Pb deposit and supports an early onset for compressional deformation in the Zagros Orogen. The geochronological data support textural evidence that mineralization in veins occurred during regional compression in an active tectonic environment. Therefore the possibility that magmatic fluids and/or heat contributed to the mineralizing system should be incorporated into regional exploration models. Further work is required to test the extent to which epigenetic carbonate-hosted Pb-Zn deposits in the thrust and fold belt settings of the Central and Eastern Tethys differ from those in the Western Tethys and classic Mississippi Valley Type ore deposits.

Fault zones control the locations of many ore deposits, but the ore-forming processes in such fault zones are poorly understood. We have studied the deformation and ore textures associated with fault zones that controlled the lead–zinc mineralization of the Dongmozhazhua deposit, central Tibet, ∼100 km southwest of Yushu City. Geological mapping shows that the structural framework of the Dongmozhazhua area is defined by NW–SE-trending reverse faults and superposed folds that indicate at least two stages of deformation. The first stage is characterized by tight nearly E–W-striking folds that formed during the closure of the Jinshajiang Paleo-Tethyan Ocean in the Triassic. The second stage of deformation produced NW–SE-trending reverse faults and related structures of the Fenghuoshan–Nangqian fold-and-thrust belt associated with India–Asia collision in the late Eocene to Oligocene. Scanline surveys along the ore-controlling fault zones show an internal structure that comprises a damage zone, a breccia zone with clasts that have become rounded, and a breccia zone with lenticular clasts, and this complex architecture was formed during at least two compressional substages of deformation. The Pb–Zn mineralization in the Dongmozhazhua area occurs exclusively close to NW–SE-trending reverse fault zones. Microtextural observations reveal that mineralization occurred as veinlets and disseminated blebs in limestone clasts, and as continuous bands and cements in fractured rocks. Cataclastic sulfide grains also can be seen in the matrix of some fault zones. The types of mineralization differ with structural position. The fillings of the ore-bearing veinlets typify the products of hydraulic fracture and both types of mineralization took place concurrently with regional contraction. We consider, therefore, that the ore-bearing fluids in the Dongmozhazhua deposit were concentrated in fault zones during regional compression and that the ore minerals were precipitated during hydraulic fracturing of host rocks. Subsequent fault activity pulverized some pre-existing sulfide material into cataclastic grains in the matrix of a tectonic breccia that developed in the same faults.

The Sanjiang metallogenic belt includes a variety of economically important carbonate-hosted Pb-Zn deposits that share some similarities with classic Mississippi Valley-type (MVT) ore deposits but are hosted within a thrust belt rather than an orogenic foreland. This study aims to clarify the origin of mineralizing fluids responsible for this style of mineralization. Fluid inclusions trapped in ore-stage carbonate and fluorite from these deposits have salinities of ~6 to 28 wt % NaCl equiv and homogenization temperatures of 70° to 370°C that extend to much higher values than are typical of MVT deposits. The majority of ore-stage samples have fluid inclusion molar Br/Cl ratios of between seawater (1.5 × 10 −3 ) and (2.86 ± 0.04) × 10 −3 , but low-salinity fluid inclusions in late calcite have lower Br/Cl of less than (0.55 ± 0.01) × 10 −3 . In contrast, fluid inclusion molar I/Cl ratios are uniformly greater than the seawater value of ~0.8 × 10 −6 and extend from (2.1 ± 1.1) × 10 −6 to (506 ± 12) × 10 −6 . This range of Br/Cl and I/Cl values is similar to what has been reported for fluid inclusions in other MVT districts and together with the fluid salinity implies the ore-forming fluids had a dominant origin from basinal brines (e.g., sedimentary formation waters) formed by the subaerial evaporation of seawater; all the fluids were influenced by addition of organic Br and I derived from the sedimentary host rocks and some fluids were locally modified by interaction with evaporites producing low Br/Cl ratios. The fluid inclusions have 40 Ar/ 36 Ar ratios of up to 441 that are higher than the atmospheric value of 296 and typical of carbonate sedimentary rocks. The fluid inclusions have high concentrations of atmospheric 36 Ar and variable 129 Xe/ 36 Ar and 84 Kr/ 36 Ar ratios that are outside the range expected from mixing air and air-saturated water. These data are likely to reflect a complex fluid history involving acquisition of atmospheric ( 36 Ar, 84 Kr, 129 Xe) and radiogenic (e.g., 40 Ar ✼ ) noble gases trapped in sedimentary rocks and fractionation of these gases between water and hydrocarbons. The 3 He/ 4 He ratios of fluorite fluid inclusions range from a typical crustal value of 0.061 ± 0.004 to values of >0.7 Ra, indicating a minor component of mantle-derived 3 He. The fluids with the highest 3 He/ 4 He also have 4 He/ 40 Ar ✼ close to the mantle value, suggesting the 3 He could have been introduced by a volumetrically minor fluid of either magmatic or deep metamorphic origin ( 40 Ar ✼ = radiogenic 40 Ar). The new halogen and noble gas data are consistent with a model in which regional Pb-Zn mineralization formed by mixing two modified basinal brines that were transported through independent aquifers and fluid pathways to the sites of mineralization. A low-temperature brine contained organic Br, I, and H 2 S, and a high-temperature metal-rich brine (>370°C) that included a volumetrically minor magmato-metamorphic component was channeled up deeply penetrating thrust structures.

The Jinding Zn–Pb sediment-hosted deposit in western Yunnan, China, is the fourth largest Zn deposit in Asia. Based on field observations of the ore textures, breccias, and the sandstone host rocks, the ores formed in a dome that was created by the diapiric migration of evaporites in the Lanping Basin during Paleogene deformation and thrust loading. Most of the ore occurs in sandstones that are interpreted to be a former evaporite glacier containing a melange of extruded diapiric material, including breccias, fluidized sand, and evaporites that mixed with sediment from a fluvial sandstone system. A pre-ore hydrocarbon and reduced sulfur reservoir formed in the evaporite glacier that became the chemical sink for Zn and Pb in a crustal-derived metalliferous fluid. In stark contrast to previous models, the Jinding deposit does not define a unique class of ore deposits; rather, it should be classified as MVT sub-type hosted in a diapiric environment. Given that Jinding is a world-class ore body, this new interpretation elevates the exploration potential for Zn–Pb deposit in other diapir regions in the world.

The newly discovered Chaqupacha Mississippi Valley-type (MVT) Pb–Zn deposit in central Tibet has been found to be helpful for understanding MVT ore formation relative to tectonic evolution of a foreland fold and thrust belt. The deposit lies in the Tuotuohe area of the western Fenghuo Shan-Nangqian fold and thrust belt of the India–Asia continental collision zone. It contains NNW-striking and folded Late Permian strata including an upper clastic unit and an underlying limestone unit. The strata overlie late Oligocene clastic rocks through a south-dipping reverse fault that is associated with regional northward thrusting during the Paleogene. The Late Permian and late Oligocene strata are unconformably overlain by flat-lying early Miocene marl and mudstone of the Wudaoliang Formation. Lead and zinc ores are mainly hosted by pre-ore dissolution and collapse breccias in the Late Permian limestone. The style of mineralization is epigenetic, as shown by replacement of the pre-ore dissolution breccia matrix and open-space-fill by galena, sphalerite, calcite, and minor barite and pyrite. δ34S values of the main sulfide galena range from − 27.5‰ to + 12.6‰. These features, together with the lack of magmatic activity during the mineralization, suggest that Chaqupacha is an MVT deposit. Subordinate mineralization is also present in the early Miocene Wudaoliang Formation marl and the paleokarst breccia which contains matrix compositionally equivalent to strata of the Wudaoliang Formation. The mineralization shares similar mineral associations and textures with the pre-ore dissolution breccia-hosted mineralization. Thus, the Pb and Zn mineralization in the entire deposit probably resulted from the same mineralizing event, which is younger than the youngest ore-hosting rocks (i.e., the early Miocene Wudaoliang Formation). Considering that thrusting in the Tuotuohe area had ceased prior to deposition of the Wudaoliang Formation host rocks, the mineralization at Chaqupacha post-dated the regional deformation. The Chaqupacha deposit thus provides a good example of MVT mineralization in a foreland fold and thrust belt that post-dates regional thrusting.

A significant belt of carbonate-hosted Pb–Zn mineralization occurs in the Himalayan–Zagros collisional orogenic system. Three differing types of these Pb–Zn deposits within this belt have been identified based on variations in gangue mineral assemblages, leading to the classification of carbonate-, quartz- and fluorite-rich classes of Pb–Zn deposits. The third Pb–Zn mineralization (fluorite-rich) type is common in this orogenic system, but little research has been undertaken on it. Here, we focus on the Mohailaheng deposit, a large-sized fluorite-rich carbonate-hosted Pb–Zn deposit (> 100 Mt Pb + Zn ores with average grade of 2.18%–4.23%); the deposit is located in the Sanjiang Cenozoic thrust-fold belt, an important part of the Himalayan–Zagros collisional orogenic system and an area that formed during the early Tertiary India–Eurasia collision. The main orebodies in this deposit are stratabound and are hosted by Carboniferous limestones that are located along secondary faults associated with a regional thrust fault. The main assemblage is a sphalerite + galena + pyrite sulfide assemblage associated with a calcite + fluorite + barite + quartz + dolomite gangue assemblage. Detailed field and experimental work indicates that the deposit formed during three distinct phases of hydrothermal activity. Studies on fluid inclusion and stable isotopes of gangue minerals indicate that two dominant distinct fluids involving the deposit formation. They include (1) a low-temperature (130–140 °C), high-salinity (23–24 wt.% NaCl equivalent) basinal brine containing Na + –K + –Mg 2 + –Ca 2 + –Cl − ions and abnormally high SO 4 2 − concentrations, which probably derived from Tertiary basins in the regional district, and (2) a low- to moderate-temperature (170–180 °C) and moderate- to high-salinity (19–20 wt.% NaCl equivalent) metamorphic fluid containing Na + –K + –Mg 2 + –Cl – –SO 4 2 − ions and abnormally high F − and organic matter concentrations, that probably formed during regional metamorphism. Some evaporated seawaters and meteoric fluids were also identified in mixtures with these two dominant fluids. The Pb–Zn mineralization at Mohailaheng formed during three distinct stages, consistent with the regional tectonic history. The first stage involved the formation of favorable lithological and structural traps at Mohailaheng during regional thrusting, leading to the migration of compressed metamorphic waters at depth along a detachment zone, sequestering metals from sediments within the region. Basinal brines at the surface also began to infiltrate down along the secondary faults, dissolving gypsum from the underlying sediments. The second stage was associated with the cessation of thrusting and the onset of strike-slip movements along these thrust faults. Metamorphic fluids containing high concentrations of halogen ions, organic gases, and metals ascended into the structural traps at Mohailaheng along the reactivated thrust faults, causing fluorite, calcite, and some sulfide precipitation. Then, basinal brines rich in SO 4 2 − quickly descended into the structural traps along the reactivated faults, causing reduction of SO 4 2 − by organic matter, and producing significant amounts of H 2 S. The reduced sulfur then reacted with the metals in the fluids, causing significant sulfide precipitation. The third stage was associated with metal-depleted fluids, which only resulted in the precipitation of calcite from the diluted basinal brines. Combining these findings with research results on other fluorite-rich carbonate-hosted Pb–Zn deposits in the Himalayan–Zagros orogenic system suggests that this type of carbonate-hosted Pb–Zn deposits can also be classified as Mississippi Valley-type (MVT) deposits, and that the origin of the fluorite in these deposits may be related to multiple hydrothermal fluids involved in the mineralization evolution.

The Dexing porphyry Cu–Mo–Au deposit in east China (1,168 Mt at 0.45 % Cu) is located in the interior of the South China Craton (SCC), made up of two lithospheric blocks, the Yangtze and Cathaysia blocks. The Cu–Mo–Au mineralization is associated with mid-Jurassic granodioritic porphyries with three high-level intrusive centers, controlled by a series of lineaments at the southeastern edge of the Yangtze block. Available age data define a short duration (172–170 Ma) of the felsic magmatism and the mineralization (171 ± 1 Ma). The deposit shows broad similarities with deposits in volcanoplutonic arcs, although it was formed in an intracontinental setting. Porphyries associated with mineralization are mainly granodiorites, which contain abundant phenocrysts (40–60 %) and carry contemporaneous microgranular mafic enclaves (MMEs). They are mainly high-K calc-alkaline and show geochemical affinities with adakite, characterized by relatively high MgO, Cr, Ni, Th, and Th/Ce ratios. The least-altered porphyries yielded relatively uniform e Nd(t) values from −0.9 to +0.6, and wide (87Sr/86Sr)i range between 0.7046 and 0.7058 partially overlapping with the Sr–Nd isotopic compositions of the MMEs and mid-Jurassic mafic rocks in the SCC. Zircons from the porphyries have positive e Hf(t) values (3.4 to 6.9), and low δ18O values (4.7 to 6.3 ‰), generally close to those of depleted mantle. All data suggest an origin by partial melting of a thickened juvenile lower crust involving mantle components (e.g., Neoproterozoic mafic arc magmas), triggered by invasion of contemporaneous mafic melts at Dexing. The MMEs show textural, mineralogical, and chemical evidence for an origin as xenoliths formed by injection of mafic melts into the felsic magmas. These MMEs usually contain magmatic chalcopyrite, and have original, variable contents of Cu (up to 500 ppm). Their geochemical characteristics suggest that they were derived from an enriched mantle source, metasomatized by Proterozoic slab-derived fluids, and supplied a part of Cu, Au, and S for the Dexing porphyry system during their injection into the felsic magmas. The 171 ± 1 Ma magmatic-hydrothermal event at Dexing is contemporaneous with the mid-Jurassic extension in the SCC, followed by 160–90 Ma arc-like magmatism in southeastern China. With respect to the tectono-magmatic evolution of the SCC, the emplacement of Cu-bearing porphyries and the associated Cu mineralization occurred in response to the transformation from a tensional regime, related to mid-Jurassic extension, to a transpressional regime, related to the subduction of the Paleo-Pacific oceanic lithosphere.

Cenozoic economic Zn–Pb–Cu–Ag ore deposits occur in the Lanping foreland fold belt (Lanping basin) of the Eastern Indo-Asian collision zone (EIACZ), eastern margin of the Tibetan plateau. They are sediment-hosted and controlled by two Cenozoic thrust–nappe systems developed in the western and eastern segments of the Tertiary basin, respectively, where thrusting was towards the centre of the basin in an approximately E–W direction and juxtaposes Triassic–Cretaceous over Tertiary strata. In the western system, Cu deposits occur as veins in the root zone, hosted by ~ NS-striking faults in Jurassic intense folds. Zn deposits occur in its front zone, controlled by second-order faults of major thrust faults and thrust-related strike-slip faults. In the eastern system, Zn–Pb–Cu–Ag deposits are located in the front zone, controlled by an E-dipping thrust fault and its second-order faults. The giant Jinding Zn–Pb deposit is controlled by a trap structure related to regional thrusting. Homogenization temperatures of fluid inclusions from these deposits are predominately δ 34 S CDT values ranging from − 30.4‰ to 11.2‰. H–O isotopes of fluid inclusions are similar to those of basinal brines, and C–O isotopes of hydrothermal carbonate minerals are partly close to those of carbonates and sedimentary organisms. These data suggest that the ore-forming fluids and materials mainly derive from the fluids and various rocks of the basin, respectively. The sediment-hosted Zn–Pb–Cu–Ag deposits in the Lanping foreland fold belt share some similarities with MVT-, SST-, SSC-, and SEDEX-type deposits in that there is a lack of any igneous affinity and instead must relate to activities of basinal fluids. The deposits show, however, a set of unique features: (1) they were formed in a strongly deformed foreland basin within a continent collision orogen and (2) closely related to regional thrust–nappe structure; (3) they are fault-controlled, commonly without strong selection for type of host rocks; and (4) contain a variety of metals including Zn, Pb, Cu, Ag, and minor Sr, Co, etc. It is suggested that the Zn–Pb–Cu–Ag deposits controlled by the thrust systems in the Lanping foreland belt are a new sub-type within the family of sediment-hosted base metal deposits.

The mesogenetic dissolution is well developed in the middle Ordovician Yijianfang formation (O2yj) limestone, and the dissolution pores are very important for petroleum accumulation in the south slope area of the Tahe oilfield which lies in the north of the Tarim basin, northwestern China. Mottled, dotted or laminar dissolution can be observed in the O2yj limestone. Under microscope, the grains, lime matrix and all stages of calcite cements (including oil-inclusion-bearing blocky calcite cements) can all be found dissolved ubiquitously. The stylolites in the limestone were enlarged and rounded because of dissolution. Some dolomite rhombs, precipitated along stylolites in burial environment, were found dissolved as well. The dissolution of the blocky calcite cements and dolomite rhombs and the enlarging of stylolites demonstrate that the dissolution took place in the mesogenetic environment. Concentration of trace elements, including REEs, of the eroded part of the O2yj limestone is intermediate between that of the uneroded part and that of the underlying lower Ordovician limestone hydrocarbon source rocks. Both δ13CPDB and δ18OPDB values of the eroded part are less than those of the uneroded part, respectively. The geochemical characteristics indicate that the eroding fluids are hydrocarbon-bearing fluids coming from the underlying hydrocarbon source rocks.