Search

Aluminum-rich and Si-poor calcium amphibole [~3.9 Al atoms per formula unit (apfu) and ~5.5 Si apfu for 23 O] occur in the quartz-bearing eclogites from the Donghai area, Sulu ultrahigh-pressure metamorphic belt, eastern China. Most of the aluminous amphibole phases are retrograde products from the exhumation and hydration stage and are texturally divided into a mantle phase around a porphyroblastic garnet and a crack-filling (vein) phase of a garnet. Less aluminous amphibole occurs as symplectite phase with plagioclase after omphacite. The formation process of the aluminous amphibole in the quartz-bearing samples is discussed on the basis of the analytical data by EPMA, FIB-TEM, and EBSD. The mantle amphibole occurs between garnet and symplectite or quartz. A set of plagioclase and aegirinediopside/argirine-hedenbergite thin monomineralic bands forms at the boundary between the mantle amphibole and matrix quartz. However, these monomineralic bands do not occur at the mantle amphibole-symplectite boundary. These textural diferences indicate that the recrystallization of the aluminous amphibole around garnet was controlled by significant local reactions, and the size of equilibrate domains was probably several tens of micrometers or less. The mantle amphibole is composed of inner (garnet-side) and outer (matrix-side) zones. The inner zone is compositionally homogeneous, and its atomic Al/Si value is ~0.63–0.66 and similar to that of garnet. Atomic Ca/Si value in the inner zone is also almost uniform and is generally identical to that of garnet. The outer zone exhibits a monotonic decrease in the Al/Si and Ca/Si values outward, and its composition at the outermost margin is similar to that of the symplectitic amphibole. The crack-filling amphibole has a composition similar to the inner zone of the mantle amphibole. The CPO pattern of the crack-filling amphibole is diferent from that of the adjacent mantle amphibole, showing that the crack-filling amphibole is cut by the mantle amphibole. The textural relationship between the mantle and crack-filling amphibole phases and their compositional characteristics imply that: (1) the mantle type is a slightly later stage product than the crack-filling type, and (2) the boundary between the inner and outer zones of the mantle aluminous amphibole probably corresponds to the initial surface of the porphyroblastic garnet. The inner zone is considered to have grown inward by simple substitution of garnet, using the tetrahedral and octahedral cations of the garnet as the basic framework. On the other hand, most of the outer zone of the mantle-type amphibole grew outward in the matrix from the initial surface of the garnet porphyroblast. The mantle amphibole shows a CPO similar to that of amphibole in the adjacent symplectite domain, suggesting that these two types of amphibole formed almost simultaneously, sharing crystallographic orientation with each other. The formation of crack-filling aluminous amphibole was probably promoted by the hydraulic microfracturing process at an early stage of exhumation and hydration. The mantle and symplectitic amphibole phases formation was promoted by the subsequent infiltration of metamorphic fluid. The aluminous amphibole in the SiO2 phase-bearing eclogites probably recrystallized with the formation of a localized SiO2-undersaturated reaction domain because of rapid exhumation and subsequent rapid cooling of the Sulu UHP metamorphic belt. [ABSTRACT FROM AUTHOR]

The Sanbagawa belt is one of the famous subduction‐related high‐pressure (HP) metamorphic belts in the world. However, spatial distributions of eclogite units in the belt have not yet satisfactorily established, except within the Besshi region, central Shikoku, southwest Japan because most eclogitic rocks were affected by lower pressure overprinting during exhumation. In order to better determine the areal distribution of the eclogite units and their metamorphic features, inclusion petrography of garnet porphyroblasts using a combination of electron probe microanalyser and Raman spectroscopy was applied to pelitic and mafic schists from the Asemi‐gawa region, central Shikoku. All pelitic schist samples are highly retrogressed, and include no index HP minerals such as jadeite, omphacite, paragonite, or glaucophane in the matrix. Garnet porphyroblasts in pelitic schists occur as subhedral or anhedral crystals, and show compositional zoning with irregular‐shaped inner segments and overgrown outer segments, the boundary of which is marked by discontinuous changes in spessartine. This feature suggests that a resorption process of the inner segment occurred prior to the formation of the outer segment, indicating discontinuous crystallization between the two segments. The inner segment of some composite‐zoned garnet grains displays Mn oscillations, implying infiltration of metamorphic fluid during the initial exhumation stage. Evidence for an early eclogite facies event was determined from mineral inclusions (e.g., jadeite, paragonite, glaucophane) in the garnet inner segments. Mafic schists include no index HP minerals in the matrix as with pelitic schists. Garnet grains in mafic schists show simple normal zoning, recording no discontinuous growth during crystal formation. There are no index HP mineral inclusions in the garnet, and thus no evidence suggesting eclogite facies conditions. Quartz inclusions in garnet of the pelitic and mafic schists show residual pressure values (∆ω1) of >8.5 cm−1 and <8.5 cm−1 respectively. The combination of Raman geobarometry and conventional thermodynamic calculations gives peak P–T conditions of 1.6–2.1 GPa at 460–520°C for the pelitic schists. The ∆ω1 values of quartz inclusions in mafic schists are converted to a metamorphic pressure of 1.2–1.4 GPa at 466–549°C based on Raman geothermometry results. These results indicate that a pressure gap definitely exists between the mafic schists and the almost adjacent pelitic schists, which have experienced a different metamorphic history. Furthermore, the peak P–T values of the Asemi‐gawa eclogite unit are compatible with those of Sanbagawa eclogite unit in the Besshi region of central Shikoku, suggesting that these eclogite units share a similar P–T trajectory. The Asemi‐gawa eclogite unit exists in a limited area and is composed of mostly pelitic schists. We infer that these abundant pelitic schists played a key role in buoyancy‐driven exhumation by reducing bulk rock density and strength. [ABSTRACT FROM AUTHOR]

This report describes an investigation of the composite metamorphic history recorded in garnet porphyroblasts of Sambagawa metasediments, and presents discussions of the possible distribution of eclogite facies lithologies in the Besshi region, central Shikoku, southwest Japan. Garnet grains usually show chemically composite zoning with resolved inner and overgrown outer segments, respectively. The inner segment usually contains paragonite as a sodic phase inclusion and rarely contains omphacite or glaucophane, whereas the outer segment rarely includes albite but no paragonite. The inner segment often includes quartz grains that preserve high residual pressures corresponding to the eclogite facies conditions, whereas the outer segment includes quartz grains that preserve lower residual pressures corresponding to the epidote-amphibolite facies conditions. For this composite-zoned garnet, the assemblage of sodic phase inclusions and the values of the residual pressure of quartz inclusions imply the following successive metamorphic path: prograde eclogite facies stage → decompression and hydration reaction stage → prograde epidote-amphibolite facies stage. Metasediments containing this composite-zoned garnet with such evidence for eclogite facies conditions are more widely distributed than the eclogitic lithologies that contain the assemblage of omphacite + garnet. These results imply that the combination of (i) the chemical composite zoning of garnet, (ii) the nature of sodic phase inclusions, and (iii) the residual pressure of quartz inclusions is useful as criteria to ascertain the true distribution of the lithologies that have experienced eclogite facies metamorphism for the Sambagawa metasediments, which was difficult to recognize in earlier studies. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents the first report on the occurrence of eclogite from the Kumon range of the Western province in Myanmar, which is in the southeastern extension of the Himalayan orogenic belt. The eclogite is mainly composed of omphacite, garnet, hornblende/edenite/katophorite/taramite, biotite, quartz, and rutile. The garnet grains in the eclogite usually show textures of barrier reef, atoll, and table reef types, and have a wide compositional range of Alm58–70Sps1–2Prp9–16Grs14–31. Omphacite grains that occur as garnet inclusions and as isolated crystals in the matrix have similar compositions of Jd34–45 and Jd37–44, respectively. Lesser amounts of jadeitic clinopyroxene (Jd21–38), phengite, biotite, albite, and quartz occur in the lagoon of barrier reef and atoll garnet grains. The matrix omphacite is partly replaced by symplectite of sodic clinopyroxene of Jd20–29 and albite. The lower limits of the pressure/temperature during the eclogite stage, which are defined by the assemblage of garnet, omphacite (Jd40–45), and quartz, are 1.2–1.3GPa/530–615°C. The finding of eclogite from Myanmar suggests the possibility of a wide occurrence of high-pressure metamorphic rocks in the ophiolite zone along the southeastern extension of the Indus-Yarlung Zangbo suture in Myanmar and Indochina. [Copyright &y& Elsevier]

The Higashi-akaishi garnet-bearing ultramafic body in the Sanbagawa metamorphic belt, Southwest Japan, represents a rare example of oceanic-type ultrahigh-pressure metamorphism. The body of 2 km × 5 km is composed mostly of anhydrous dunite with volumetrically minor lenses of clinopyroxene-rich rocks. Dunite samples contain high Ir-type platinum group elements (PGE) and Cr in bulk rocks, high Mg and Ni in olivine, and high Cr in spinel. On the other hand, clinopyroxene-rich rocks contain low concentrations of Ir-type PGE and Cr, high concentrations of fluid-mobile elements in bulk rocks, and low Ni and Mg in olivine. Clinopyroxene is diopsidic with low Al2O3. The compositions of bulk rocks and mineral chemistry of spinel, olivine, and clinopyroxene suggest that the olivine-dominated rocks are residual mantle peridotites after high degrees of influx partial melting, and that the clinopyroxene-rich rocks are cumulates of subduction-related melts. Thus, the Higashi-akaishi ultramafic body originated from the interior of the mantle wedge, most likely the forearc upper mantle. It was then incorporated into the Sanbagawa subduction channel by a mantle flow, and underwent high pressure metamorphism to a depth greater than 100 km. Such a strong active flow in the mantle wedge is likely facilitated by the lack of serpentinites along the interface between the slab and the overlying mantle, as it was too hot for serpentine. These unusually hot conditions and strong active mantle flow may reflect conditions in the earliest stage of development of subduction, and may have been maintained by massive upwelling and subsequent eastward flow of asthenospheric mantle in the northeastern Asian continent in Cretaceous time when the Sanbagawa belt began to form. [ABSTRACT FROM AUTHOR]

Jadeite-bearing eclogites and associated blueschists locally crop out in a greenschist facies area at Kuldkourla, near the Akeyazhi River in the western Chinese Tianshan region, northwestern China. Garnet in these metamorphic rocks shows prograde zoning with increasing Mg and decreasing Mn from the crystal center towards the rim, and is divided into Ca-poor/Fe-rich core and Ca-rich/Fe-poor mantle parts. The garnet cores include the assemblages of (i) jadeite/omphacite (Xjd = 0.34–0.96) + barroisite/taramite; and (ii) omphacite + barroisite/pargasite, with paragonite, epidote, rutile and quartz as major phases with rare albite. The garnet mantles rarely contain inclusions of omphacite, glaucophane, epidote, rutile and quartz. Major matrix phases of the pre-exhumation stage are omphacite, glaucophane, paragonite, rutile and quartz. These mineral parageneses give pressure ( P)-temperature ( T) conditions of 0.9 GPa/390°C−1.4 GPa/560°C for the stage of the garnet core formation, 1.8 GPa/520°C for the stage of the garnet mantle formation, and 2.2 GPa/495°C-2.4 GPa/535°C for the peak eclogite facies assemblage in the matrix. The estimated P-T conditions and continuous changes of mineral parageneses imply a counterclockwise P-T path which is a combination of (i) an early prograde stage of high-pressure/low-temperature ( HP/LT) blueschist facies and/or LP/LT eclogite facies; (ii) a later prograde stage involving compression with minimal heating; and (iii) a climax-of-subduction stage characterized by a slight decrease of temperature with increasing pressure. The negative dP/dT of the latest subduction stage is possibly a record of the following events after a continuous subduction and ridge approach: (i) material migration within the upper part of the subducting slab, which has an inverse thermal gradient caused by ductile flow and/or slab break during subduction; and/or (ii) temporary cooling of the wedge mantle–slab interface by continuous subduction of a relatively cold slab following subduction of a hotter ridge. [ABSTRACT FROM AUTHOR]

Garnet grains in Sanbagawa quartz eclogites from the Besshi region, central Shikoku commonly show a zoning pattern consisting of core and mantle/rim that formed during two prograde stages of eclogite and subsequent epidote–amphibolite facies metamorphism, respectively. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is most common and sometimes coexists with other types of garnet in a thin section. Type I core formed with epidote and kyanite during the prograde eclogite facies stage. The inner cores of types II and III crystallized within different whole‐rock compositions of epidote‐free and kyanite‐bearing eclogite and epidote‐ and kyanite‐free eclogite at the earlier prograde stage, respectively. The inner core of type IV probably formed during the pre‐eclogite facies stage. The inner cores of types II, III, and IV, which formed under different P–T conditions of prograde metamorphism and/or whole‐rock compositions, were juxtaposed with the core of type I, probably due to tectonic mixing of rocks at various points during the prograde eclogite facies stage. After these processes, they have shared the following same growth history: (i) successive crystal growth during the later stage of prograde eclogite facies metamorphism that formed the margin of the type I core and the outer cores of types II, III, and IV; (ii) partial resorption of the core during exhumation and hydration stage; and (iii) subsequent formation of mantle zones during prograde metamorphism of the epidote–amphibolite facies. The prograde metamorphic reactions may not have progressed under an isochemical condition in some Sanbagawa metamorphic rocks, at least at the hand specimen scale. This interpretation suggests that, in some cases, material interaction promoted by mechanical mixing and fluid‐assisted diffusive mass transfer probably influences mineral reactions and paragenesis of high‐pressure metamorphic rocks. Garnet grains in the quartz eclogites are grouped into four types (I, II, III, and IV) according to the compositional trends of their cores. Type I garnet is the most common and sometimes coexists with other types of garnet in a thin section. The coexistence of the different types of garnet is probably due to deformation‐induced lithological mixing at various points during the prograde eclogite facies stage. [ABSTRACT FROM AUTHOR]

A Laser Raman microspectrometry method was applied to metamorphic quartz in quartz-eclogite-, epidote-amphibolite-, and amphibolite-facies rocks to assess the quantitative correlation between the Raman frequency shift and metamorphic pressure. Quartz crystals sealed in garnet and other phases have a higher frequency shift than those in the matrix. Furthermore, the quartz inclusions show a frequency shift specific to the individual host crystals in eclogites (garnet ≈ kyanite > omphacite ≈ epidote). These observations imply that the residual pressures retained by quartz inclusions depend on elastic parameters of the host crystals, as discussed by previous researchers. The Raman frequency shift of quartz inclusions in garnet systematically increases with increasing peak metamorphic pressures from the amphibolite facies (0.30.0.55 GPa/470-570 °C), through the epidote-amphibolite facies (0.8.1.1 GPa/470.635 °C) to the quartz-eclogite facies (2.1.2.5 GPa/660-710 °C). Calibrations based on experimental work suggest that the measured Raman frequency shifts signify residual pressures of 0.1.0.2, 0.4.0.6, and 0.8.1.0 GPa for these three groups of metamorphic rocks, respectively. Normal stresses (internal pressures) of quartz inclusions in garnet, numerically simulated with an elastic model, and inferred pressure-temperature conditions at peak metamorphic stage are compatible with the residual pressures estimated from the frequency shifts. Laser Raman microspectroscopic analysis of quartz is a simple and effective method for (1) comparison of pressure conditions in metamorphic rocks formed under various pressure-temperature conditions, and (2) detection of a higher-pressure signature in metamorphic rocks extensively recrystallized during the subsequent exhumation and hydration stage. [ABSTRACT FROM AUTHOR]

Petrologic studies of the Kotsu eclogite from the Sambagawa high-pressure (P), low-temperature (T) metamorphic belt show that the eclogite has recorded a very steep subduction-stage P-T path reaching 20 kbar and 600 °C; the dP/dT is >7.1 kbar/100 °C. Compilation of previously derived subduction-stage P-T paths from the Sambagawa belt and the result of this study show that these P-T paths are not on a straight line from the origin, but define a curve with dP/dT increasing with pressure. A new model incorporating the progressive approach of an oceanic ridge to a subduction zone shows that the Sambagawa P-T paths are best explained by a setting in which a ridge is close to being subducted at a slow rate relative to the plate-subduction rate. Exhumation of high-P, low-T metamorphic rocks in oceanic subduction zones may be associated with the slow approach and subsequent subduction of oceanic ridges. [ABSTRACT FROM AUTHOR]