Search

Background: Evaluation of arterial deformation and mechanics using strain analysis on ultrasound greyscale images has gained increasing scientific interest. The aim of this study was to validate in vitro measurements of circumferential strain by velocity vector imaging (VVI) and speckle-tracking echocardiography (STE) against sonomicrometry as a reference method., Method: Two polyvinyl alcohol phantoms sized to mimic the descending aorta were constructed and connected to a pulsatile flow pump to obtain high-resistance flow profiles. The ultrasound images of the phantom used for strain analyses were acquired with a transesophageal probe. Global and regional circumferential strains were estimated using VVI and STE and were compared with the strain acquired by sonomicrometry., Results: Global circumferential peak strain estimated by VVI and STE correlated well to sonomicrometry (r = 0·90, P≤0·001; and r = 0·97, P≤0·01) with a systematic bias of -0·78% and +0·63%, respectively. The reference strain levels were 1·07-2·54%. Circumferential strain values obtained by VVI were significantly lower than those obtained by STE (bias -1·41%, P≤0·001)., Conclusion: Global circumferential strain measured by VVI and STE correlates well with sonomicrometry. However, strain values obtained by VVI and STE differ significantly, which should be taken into consideration when comparing results from studies using different software for aortic strain measurements., (© 2017 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.)

The combination of medical imaging with computational fluid dynamics (CFD) has enabled the study of 3-D blood flow on a patient-specific level. However, with models based on gated high-resolution data, the study of transient flows, and any model implementation into routine cardiac care, is challenging. This paper presents a novel pathway for patient-specific CFD modelling of the left ventricle (LV), using 4-D transthoracic echocardiography (TTE) as input modality. To evaluate the clinical usability, two sub-studies were performed. First, a robustness evaluation was performed, where repeated models with alternating input variables were generated for six subjects and changes in simulated output quantified. Second, a validation study was carried out, where the pathway accuracy was evaluated against pulsed-wave Doppler (100 subjects), and 2-D through-plane phase-contrast magnetic resonance imaging measurements over seven intraventricular planes (6 subjects). The robustness evaluation indicated a model deviation of <12%, with highest regional and temporal deviations at apical segments and at peak systole, respectively. The validation study showed an error of <11% (velocities <10 cm/s) for all subjects, with no significant regional or temporal differences observed. With the patient-specific pathway shown to provide robust output with high accuracy, and with the pathway dependent only on 4-D TTE, the method has a high potential to be used within future clinical studies on 3-D intraventricular flow patterns. To this, future model developments in the form of e.g., anatomically accurate LV valves may further enhance the clinical value of the simulations.

Background: A novel polymer-shelled contrast agent (CA) with multimodal and target-specific potential was developed recently. To determine its ultrasonic diagnostic features, we evaluated the endocardial border delineation as visualized in a porcine model and the concomitant effect on physiological variables., Methods: Three doses of the novel polymer-shelled CA (1.5 ml, 3 ml, and 5 ml [5 × 10(8) microbubbles (MBs)/ml]) and the commercially available CA SonoVue (1.5 ml [2-5 × 10(8) MBs/ml]) were used. Visual evaluations of ultrasound images of the left ventricle were independently performed by three observers who graded each segment in a 6-segment model as either 0 = not visible, 1 = weakly visible, or 2 = visible. Moreover, the duration of clinically useful contrast enhancement and the left ventricular opacification were determined. During anesthesia, oxygen saturation, heart rate, and arterial pressure were sampled every minute and the effect of injection of CA on these physiological variables was evaluated., Results: The highest dose of the polymer-shelled CA gave results comparable to SonoVue. Thus, no significant difference in the overall segment score distribution (2-47-95 vs. 1-39-104), time for clinically sufficient contrast enhancement (20-40 s for both) and left ventricular overall opacification was found. In contrast, when comparing the endocardial border delineation capacity for different regions SonoVue showed significantly higher segment scores for base and mid, except for the mid region when injecting 1.5 ml of the polymer-shelled CA. Neither high nor low doses of the polymer-shelled CA significantly affected the investigated physiological variables., Conclusions: This study demonstrated that the novel polymer-shelled CA can be used in contrast-enhanced diagnostic imaging without influence on major physiological variables.

Wave intensity analysis is a concept providing information about the interaction of the heart and the vascular system. Originally, the technique was invasive. Since then new noninvasive methods have been developed. A recently developed ultrasound technique to estimate tissue motion and deformation is speckle-tracking echocardiography. Speckle tracking-based techniques allow for accurate measurement of movement and deformation variables in the arterial wall in both the radial and the longitudinal direction. The aim of this study was to test if speckle tracking-derived deformation data could be used as input for wave intensity calculations. The new concept was to approximate changes of flow and pressure by deformation changes of the arterial wall in longitudinal and radial directions. Flow changes (dU/dt) were approximated by strain rate (sr, 1/s) of the arterial wall in the longitudinal direction, whereas pressure changes (dP/dt) were approximated by sign reversed strain rate (1/s) in the arterial wall in the radial direction. To validate the new concept, a comparison between the newly developed Wave Intensity Wall Analysis (WIWA) algorithm and a commonly used and validated wave intensity system (SSD-5500, Aloka, Tokyo, Japan) was performed. The studied population consisted of ten healthy individuals (three women, seven men) and ten patients (all men) with coronary artery disease. The present validation study indicates that the mechanical properties of the arterial wall, as measured by a speckle tracking-based technique are a possible input for wave intensity calculations. The study demonstrates good visual agreement between the two systems and the time interval between the two positive peaks (W1-W2) measured by the Aloka system and the WIWA system correlated for the total group (r = 0.595, P < 0.001). The correlation for the diseased subgroup was r = 0.797, P < 0.001 and for the healthy subgroup no significant correlation was found (P > 0.05). The results of the study indicate that the mechanical properties of the arterial wall could be used as input for wave intensity calculations. The WIWA concept is a promising new method that potentially provides several advantages over earlier wave intensity methods, but it still has limitations and needs further refinement and larger studies to find the optimal clinical use.

Background: Cardiac time intervals have been described as a measure of cardiac performance, where prolongation, shortening and delay of the different time intervals have been evaluated as markers of cardiac dysfunction. A relatively recently developed method with improved ability to measure cardiac events is Tissue Doppler Imaging (TDI), allowing accurate measurement of myocardial movements., Methods: We propose the state diagram of the heart as a new visualization tool for cardiac time intervals, presenting comparative, normalized data of systolic and diastolic performance, providing a more complete overview of cardiac function. This study aimed to test the feasibility of the state diagram method by presenting examples demonstrating its potential use in the clinical setting and by performing a clinical study, which included a comparison of the state diagram method with established echocardiography methods (E/E' ratio, LVEF and WMSI). The population in the clinical study consisted of seven patients with non ST-elevation myocardial infarction (NSTEMI) and seven control subjects, individually matched according to age and gender. The state diagram of the heart was generated from TDI curves from seven positions in the myocardium, visualizing the inter- and intraventricular function of the heart by displaying the cardiac phases., Results: The clinical examples demonstrated that the state diagram allows for an intuitive visualization of pathological patterns as ischemia and dyssynchrony. Further, significant differences in percentage duration between the control group and the NSTEMI group were found in eight of the totally twenty phases (10 phases for each ventricle), e.g. in the transition phases (Pre-Ejection and Post-Ejection). These phases were significantly longer (> 2.18%) for the NSTEMI group than for the control group (p < 0.05). No significant differences between the groups were found for the established echocardiography methods., Conclusion: The test results clearly indicate that the state diagram has potential to be an efficient tool for visualization of cardiac dysfunction and for detection of NSTEMI.

Background: The use of two-dimensional echocardiography (2D echo) for detection of ischaemia is limited due to high user dependency. Longitudinal motion is sensitive for ischaemia and usable for quantitative measurement of longitudinal myocardial function but time consuming. Velocity tracking (VeT) is a new method that gives an easy three-dimensional understanding of both systolic and diastolic regional motion, using colour coded bull’s eye presentation of longitudinal velocity, derived from colour coded tissue Doppler. The aim of this study was to test the accuracy of VeT in detecting ischaemia in non-ST-segment elevation myocardial infarction (NSTEMI) patients bedside. Methods: Twenty patients with NSTEMI and 10 controls were included. Echocardiography was performed within 24 h of symptoms and prior to coronary angiography. Bull’s eye plots presenting the peak systolic velocity (PSV) and the sum of PSV and the E-wave-velocity (PSV+E) were created using our developed software. VeT was compared to expert wall motion scoring (WMS) and bedside echo. We used the clinical conclusion based on ECG, angiography and clinical picture as ‘gold standard’. Results: Sensitivity for ischaemia with VeT (PSV+E) was 85% and specificity 60%. The corresponding sensitivities for expert WMS were 75% (specificity 40%). For regional analysis VeT and WMS showed comparable results with correct regional outcome in 11/20 of patients both superior to bedside echo. Conclusion: Velocity tracking is a promising technique that provides an easily understandable three-dimensional bull’s eye plot for assessment of regional left ventricular longitudinal velocity with great potential for detection of regional dysfunction and myocardial ischaemia. [ABSTRACT FROM AUTHOR]