Search

Purpose: The serious wear problem of heavy-haul freight vehicle wheels affects the safety and economy of vehicle operation. This paper aims to study wheel wear evolution law and the influence of line parameters on wheel wear of heavy-haul freight, and provide the basis for operation and line maintenance. Design/methodology/approach: The wheel wear test data of heavy-haul freight vehicles were analyzed. Then a heavy-haul freight vehicle dynamic model was established. The line parameters influencing wheel wear in heavy-haul freight vehicles were also analyzed by the Jendel wear model, and the effects of rail cant, rail gauge, rail profile and line ramp on wheel wear were analyzed. Findings: A rail cant of 1:40 results in less wheel wear; an increase in the rail gauge can reduce wheel wear; and when matched with the CHN60 rail, the wear depth is relatively small. A decrease of 9.21% in wheel wear depth when matched with the CHN60 rail profile. The ramp of the heavy-haul line is necessary to consider for calculating wheel wear. When the ramp is considered, the wear depth increases by 8.47%. The larger the ramp, the greater the braking force and therefore, the greater of the wheel wear. Originality/value: This paper first summarizes the wear characteristics of wheels in heavy-haul freight vehicles and then systematically analyzes the effect of line parameters on wheel wear. In particular, this study researched the effects of rail cant, rail gauge, rail profile and line ramp on wheel wear. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2024-0038/ [ABSTRACT FROM AUTHOR]

The development of intelligent transportation technology has provided a significant impetus for autonomous driving technology. Currently, autonomous vehicles based on Model Predictive Control (MPC) employ motion control strategies based on sampling time, which fail to fully utilize the spatial information of obstacles. To address this issue, this paper proposes a dual-layer MPC vehicle collision-free trajectory tracking control strategy that integrates spatial kinematics and vehicle dynamics. To fully utilize the spatial information of obstacles, we designed a vehicle model based on spatial kinematics, enabling the upper-layer MPC to plan collision avoidance trajectories based on distance sampling. To improve the accuracy and safety of trajectory tracking, we designed an 8-degree-of-freedom vehicle dynamic model. This allows the lower-layer MPC to consider lateral stability and roll stability during trajectory tracking. In collision avoidance trajectory tracking experiments using three scenarios, compared to two advanced time-based algorithms, the trajectories planned by the proposed algorithm in this paper exhibited predictability. The proposed algorithm can initiate collision avoidance at predetermined positions and can avoid collisions in predetermined directions, with all state variables within safe ranges. In terms of time efficiency, it also outperformed the comparative algorithms. [ABSTRACT FROM AUTHOR]

With the advancement of technology, mining trucks are gradually becoming larger, imposing higher performance requirements on the front suspension. There is a need to transform the original integral non-independent front axle of mining dump trucks with a payload exceeding 300 tons into an independent front suspension with a double-wishbone suspension. The changing of the front suspension is bound to have an impact on the overall vehicle's handling stability and ride comfort. Therefore, the following research is conducted to investigate and analyze these effects. Firstly, the paper proposes a method for optimizing the parameters of the double-wishbone front suspension. The double-wishbone front suspension is modeled, and a comparison with a kinematic model is conducted to validate the accuracy of the model. Secondly, unreasonable hardpoint parameters are optimized. Thirdly, a dynamic model of the entire vehicle is established based on the optimized parameters, and an analysis of handling stability and ride comfort for the entire vehicle is performed. Finally, simulation results are compared and analyzed against experimental data. The results indicate that the optimized positioning parameters not only effectively enhance the suspension performance of the mining dump truck but also meet the requirements for handling stability and smoothness. The overall smoothness of the vehicle is significantly improved after the modification. This study not only holds significant engineering value in reducing vibrations in dump trucks and enhancing driver comfort, but also provides theoretical support for subsequent research and development in the industry. [ABSTRACT FROM AUTHOR]

Despite its excellent performance in path tracking control, the model predictive control (MPC) is limited by computational complexity in practical applications. The neural network control (NNC) is another attractive solution by learning the historical driving data to approximate optimal control law, but a concern is that the NNC lacks security guarantees when encountering new scenarios that it has never been trained on. Inspired by the prediction process of MPC, the deviation sequence neural network control (DS-NNC) separates the vehicle dynamic model from the approximation process and rebuilds the input of the neural network (NN). Taking full use of the deviation sequence architecture and the real-time vehicle dynamic model, the DS-NNC is expected to enhance the adaptability and the training efficiency of NN. Finally, the effectiveness of the proposed controller is verified through simulations in Matlab/Simulink. The simulation results indicate that the proposed path tracking NN controller possesses adaptability and learning capabilities, enabling it to generate optimal control variables within a shorter computation time and handle variations in vehicle models and driving scenarios. [ABSTRACT FROM AUTHOR]

This paper proposes a monitoring procedure based on characterizing state probability distributions estimated using particle filters. The work highlights what types of information can be obtained during state estimation and how the revealed information helps to solve fault diagnosis tasks. If a failure is present in the system, the output predicted by the model is inconsistent with the actual output, which affects the operation of the estimator. The heterogeneity of the probability distribution of states increases, and a large proportion of the particles lose their information content. The correlation structure of the posterior probability density can also be altered by failures. The proposed method uses various indicators that characterize the heterogeneity and correlation structure of the state distribution, as well as the consistency between model predictions and observed behavior, to identify the effects of failures.The applicability of the utilized measures is demonstrated through a dynamic vehicle model, where actuator and sensor failure scenarios are investigated. [ABSTRACT FROM AUTHOR]

This paper presents a new type of monorail rapid transit vehicle, which can operate in formation. In order to optimize the dynamic performance of the formation vehicles when passing through the small radius curve, this paper first analyzes the structure of the new monorail rapid transit vehicle, and establishes the vehicle dynamic model and multibody dynamics simulation model. Then the improved artificial potential field algorithm is used to build the formation vehicle operation controller. Finally, the dynamic performance evaluation index of the new monorail rapid transit formation vehicle is formulated, and the formation vehicle passing through the small radius curve scene is simulated. The simulation results show that the controller of the formation vehicle with dynamic optimization control can effectively optimize the load transfer coefficient of running wheels, unbalanced centrifugal acceleration and roll angle of vehicle body when passing through the curve. Through this control method, the dynamic performance of formation vehicles passing through small radius curve lines can be optimized. [ABSTRACT FROM AUTHOR]

Purpose: In this paper, improvements in reducing transmitted accelerations in a full vehicle are obtained by optimizing the gain parameters of an active control in a roughness road profile. Design/methodology/approach: For a classically designed linear quadratic regulator (LQR) control, the vibration attenuation performance will depend on weighting matrices Q and R. A methodology is proposed in this work to determine the optimal elements of these matrices by using a genetic algorithm method to get enhanced controller performance. The active control is implemented in an eight degrees of freedom (8-DOF) vehicle suspension model, subjected to a standard ISO road profile. The control performance is compared against a controlled system with few Q and R parameters, an active system without optimized gain matrices, and an optimized passive system. Findings: The control with 12 optimized parameters for Q and R provided the best vibration attenuation, reducing significantly the Root Mean Square (RMS) accelerations at the driver's seat and car body. Research limitations/implications: The research has positive implications in a wide class of active control systems, especially those based on a LQR, which was verified by the multibody dynamic systems tested in the paper. Practical implications: Better active control gains can be devised to improve performance in vibration attenuation. Originality/value: The main contribution proposed in this work is the improvement of the Q and R parameters simultaneously, in a full 8-DOF vehicle model, which minimizes the driver's seat acceleration and, at the same time, guarantees vehicle safety. [ABSTRACT FROM AUTHOR]

Aiming to promote the control performance of traditional fixed-parameter model predictive control (MPC), a new longitudinal and lateral coupling path tracking control method for the autonomous vehicle is proposed. First, a dynamic model of the autonomous vehicle, which can describe the longitudinal and lateral motion states, is established. Secondly, both the tire side-slip angle and centroid side-slip angle constraints are introduced in the path tracking controller design, which improves the accuracy of the prediction model at high speed. Furthermore, the key parameters of the proposed path tracking controller are optimized. The simulation and experimental results show that compared with the traditional MPC tracking control method, the lateral error and directional error of the proposed optimized path tracking control method under high speed decrease by 19.17 % and 11.89 %, respectively, which improves the path tracking performance significantly. [ABSTRACT FROM AUTHOR]

Braking control of urban rail vehicles with multiple carriages is critical to ensure the safe operation of urban rails. However, existing decentralized braking control methods lead to the inconsistent speed and excessive coupler force among carriages, which compromises the operation safety of urban rails. To address this issue, a cooperative braking strategy is proposed for urban rail vehicles based on Koopman model predictive control method. First, a cyber‐physical model is established, where the physical layer characterizes the dynamic model of multiple carriages using the Koopman operator. The cyber layer represents the communication topology of carriages with graph theory. Second, a cooperative braking controller is designed with the distributed model predictive control method. An optimisation problem is formulated to minimize the speed inconsistency and relative displacement difference among carriages. Third, extensive simulations under various scenarios, including normal and extreme operating conditions, are conducted to verify the effectiveness of the proposed method. Simulation results show that, compared with the classical decentralized method, the proposed braking method reduces the average relative displacement by 78% while reducing the speed error by 29%. [ABSTRACT FROM AUTHOR]

Road excitation is the basic input of vehicle vibration, which greatly impacts on vehicle ride comfort. In addition, it can cause vertical vibration of the vehicle, leading to deformation of the powertrain mount. Similarly, the longitudinal movement of the powertrain can also cause deformation of the powertrain mount. Due to the effect of the powertrain mount, there is a mutual coupling between the vehicle in the longitudinal and vertical directions, which has a great influence on the smoothness and comfort of the vehicle. In order to reveal the impact of random road excitation on the vehicle dynamic characteristics of a dual clutch transmission (DCT) vehicle under starting and shifting conditions, a longitudinal-vertical coupled dynamic model of the DCT vehicle considering the powertrain mount was established. This model includes dynamic torque model of the engine, powertrain mount model, transmission system model, tire model and road excitation model. The influence of random road excitation on the vehicle's dynamic characteristics is analyzed under starting, shifting, and different starting and shifting intentions. The simulation results of the longitudinal-vertical coupling dynamic DCT vehicle model considering road excitation are compared with vehicle test results, the model is found to accurately reflect the influence of road excitation on the dynamic performance of DCT vehicles under starting and shifting conditions, thus verifying the correctness of the model. [ABSTRACT FROM AUTHOR]

The high-speed collision issue brought on by railway vehicles' intensive and high-speed operation has become a critical concern for operational safety. Therefore, it is necessary to research the high-speed collision problem of trains. Firstly, a train collision dynamic model suitable for higher collision velocities is established. This model includes a 38-degree-of-freedom (DOF) three-dimensional vehicle model and a three-layered vibrating fixed-track model. Corresponding mathematical models are developed for nonlinear factors such as wheel–rail contact, car–end contact, and coupler overload representation in the model. Then, the Train Collision State Score (TCSS) is proposed, enabling quantitative safety evaluation under different collision conditions. Finally, the influence of the energy-absorbing device's initial attitude and leading car parameters on collisions is studied. The results indicate that initial vertical height difference and pitching angle significantly increase TCSS. As the force level of the energy-absorbing device of the leading car increases, the effects of two intermediate coupler overload states on TCSS show opposite trends. [ABSTRACT FROM AUTHOR]

In this paper, the authors investigate the issue of constructing and incorporating an accurate vehicle dynamic model for model predictive control (MPC) with an application to autonomous vehicle path following. To achieve the desired performance, MPC employs a precise dynamic model. However, the uncertainty of complex systems and their operating environments presents a challenge to the development of an adequately accurate vehicle dynamic model. This paper proposes a Deep Gaussian Process Regression (DGPR) method to improve model precision. Meanwhile, the learning model is incorporated into a novel MPC framework to enhance closed‐loop performance. High‐fidelity simulations using CarSim‐MATLAB demonstrate the validity of the proposed approach in terms of enhancing the path following performance and lateral stability under the condition of large curvature at medium to high speeds on roads with different friction coefficients when compared to the nominal MPC approach. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of path following and dynamic obstacle avoidance for an underwater biomimetic vehicle-manipulator system (UBVMS). Firstly, the general kinematic and dynamic models of underwater vehicles are presented; then, a nonlinear model predictive control (NMPC) scheme is employed to track a reference path and collision avoidance simultaneously. Moreover, to minimize the tracking error and for a higher degree of robustness, improved extended state observers are used to estimate model uncertainties and disturbances to be fed into the NMPC prediction model. On top of this, the proposed method also considers the uncertainty of the state estimator, while combining a priori estimation of the Kalman filter to reasonably predict the position of dynamic obstacles during short periods. Finally, simulations and experimental results are carried out to assess the validity of the proposed method in case of disturbances and constraints. [ABSTRACT FROM AUTHOR]

In order to improve the path following performance and solve the stability problems of autonomous distributed drive electric buses, this paper proposed a path following and lateral-yaw-roll stability integrated control method. Firstly, to cope with the varying speed during different maneuvers and roll motion of autonomous distributed drive electric buses, a nonlinear 4-DOF vehicle dynamic model which includes rolling and longitudinal movement is established. Secondly, a hierarchical control method is built, in the upper layer, a model predictive controller (MPC) is designed to generate the control inputs, which is obtained through an optimization problem including path following error and vehicle stability condition, especially the roll stability for buses, and for the lower layer, the torque of each drive wheel is distributed through solving an optimization problem about drive requirement and tire utilization. Finally, the validation of the proposed method is carried out through TruckSim-Simulink co-simulation, the results illustrate that both following accuracy and vehicle stability are obtained more effectively than the popular linear MPC method, especially roll stability is guaranteed under extreme condition. [ABSTRACT FROM AUTHOR]

This work is focused on the simulation of a complete hybrid bus vehicle model performing a real-world driving cycle. The simulation framework consists of a coupled co-simulation environment, where all the vehicle sub-system models are linked to achieve a real time exchange of input and output signals. In the vehicle model also the electric devices of the powertrain and accumulation system are included. This co-simulation platform is applied to investigate the hybridization of a 12-m city bus, performing a typical urban driving mission. A comparison between the conventional powertrain is performed against the hybridized version, to highlight the advantages and challenges. In particular, the novelty of this modeling approach is that the IC engine simulation does not rely on pre-processed look-up tables, but exploits a high-fidelity one-dimensional thermo-fluid dynamic model. However, it was necessary to develop a fast simulation methodology to exploit this predictive tool, achieving a low computational cost. The 1D engine model is first validated against the experimental engine map data available, showing a good model predictivity. Then the 1D engine model and the other models of the powertrain are coupled to the vehicle model, in order to follow the prescribed velocity profile of the driving cycle. The complete model is applied under different conditions, to evaluate the impact on performance and emissions and assess the simulation predictivity. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to study the control of differential steering for four-in-wheel-motor electric vehicles. The so-called differential steering means that the front wheel steering is realized through the differential driving torque between the left and right front wheels. With the consideration of tire friction circle, a hierarchical control method is proposed to realize the differential steering and the constant longitudinal speed simultaneously. Firstly, the dynamic models of the front wheel differential steering vehicle, the front wheel differential steering system and the reference vehicle are established. Secondly, the hierarchical controller is designed. The upper controller is to obtain the resultant forces and resultant torque required by the front wheel differential steering vehicle tracking the reference model through the sliding mode controller. In the middle controller, the minimum tire load ratio is selected as the objective function. Combined with the constraints, the resultant forces and resultant torque are decomposed into the longitudinal and lateral forces of four wheels by the quadratic programming method. The lower controller provides the required longitudinal forces and tire sideslip angles for the front wheel differential steering vehicle model through the tire inverse model and the longitudinal force superposition scheme. Simulation results show that the hierarchical controller can guarantee the vehicle to track the reference model well on both of the high and low adhesion coefficient road with all of the tire load ratios smaller than 1. It can be drawn that the control strategy proposed in this paper is effective. [ABSTRACT FROM AUTHOR]

The intelligent tracing car is a complex system with high linearity, and the design of path tracking strategy is one of the most important technologies in intelligent tracing car field. This paper proposed a novel path tracking strategy based on control dynamic model of the intelligent tracing car. The vehicle dynamic models are established separately according to the vehicle parameters and kinetic equation. The traditional path tracking strategy used the distance between the desired and actual displacements to compute the error for position control. However, the paper utilized the past and current states of the desired displacement to figure out a motion vector. The error was acquired through calculating the difference between the desired and current displacements along this motion vector. Simulation results showed excellent performance in position control and speed control for the intelligent tracing car. [ABSTRACT FROM AUTHOR]

The irregular ocean environment brings difficulties to observation and affects the movement state of underwater vehicles. Multisource information fusion can provide more reliable results on information-rich datasets. This paper proposes a multisource information fusion-based environment perception and dynamics model for underwater vehicles in irregular ocean environments. First, the multisource observation data is decomposed by the latent feature disentanglement learning model into the latent stable and dynamical features. The dynamical feature is predicted by the retrospect regression method and then integrated with the latent stable feature to predict the ocean field. After that, the environment-vehicle coupling effect is explored by thermodynamics and statics simulation. Then, a real-time dynamic model of the underwater vehicle is constructed by combining multisource information from physical principles, environmental perception, and sensor observations. Finally, extensive experiments are performed on a novel underwater glider and a publicly available South China Sea dataset to verify the proposed method. • An environment perception model is proposed for the underwater vehicle array. • A real-time dynamic model is proposed for the underwater vehicle. • Environment-vehicle coupling effect is explored. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Chongqing University of Posts & Telecommunications (Natural Science Edition) is the property of Chongqing University of Posts & Telecommunications and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The advanced modeling and estimation of overall system dynamics play a vital role in electric vehicles (EVs), as the selection of components in the powertrain and prediction of performance are the key market qualifiers. The state-space averaged model and small-signal transfer function model are useful for assessing long-term behavior in system-level analysis and for designing the controller parameters, respectively. Both models take less computation time but ignore the high-frequency switching dynamics. Therefore, these two models could be impractical for the development and testing of EV prototypes. On the other hand, the multi-domain model in available simulation tools gives in-depth information about the short-term behavior and loss analysis of power electronic devices in each subsystem, considering the switching dynamics in a long computation time. In this paper, a general mathematical framework for the dynamical analysis of complete EVs is presented using a unified, switched nonlinear model. This equation-based model runs faster than the available module-based simulation tools. Two other models, namely the time domain state-space averaged model and frequency domain small-signal transfer function model, are also developed from the switched nonlinear model for the analysis with less computation time. The design and performance of an EV with two different motors and its controllers are evaluated using the general mathematical framework. [ABSTRACT FROM AUTHOR]

This research introduces an innovative strategy to impede and lessen lateral and rear-end vehicular collisions by consolidating braking systems with active emergency steering controls. This study puts forward a T-type active emergency steering method, designed to circumvent both lateral and rear-end collisions at vehicular intersections. To secure vehicular stability and condense the time required for steering during the T-type active emergency process, this research formulates a nonlinear dynamic model for the vehicle, in addition to a nonlinear tire model. This study also engages in a thorough analysis of the constraints linked to the initial and terminal states of the steering process. The issue at hand is articulated as an optimization control problem with boundary value restrictions, which is subsequently resolved using the Radau pseudospectral method. Simulation results corroborate that the prompt commencement of the anti-collision strategy can effectively deter potential collisions. This pioneering approach shows considerable promise in augmenting the active safety of intelligent vehicles and bears meaningful implications for high-precision automotive collision evasion systems. [ABSTRACT FROM AUTHOR]

In order to solve the problem that the measured values of key state parameters such as the lateral velocity and yaw rate of the vehicle are easily interfered by random errors, a filter estimation method of vehicle state is proposed based on the principle of robust filtering and the unscented particle filter algorithm. Based on the establishment of a 3-DOF non-linear dynamic model and the Dugoff tire model of the vehicle, the adaptive robust unscented particle filter(ARUPF) is used to filter and estimate the parameters of the vehicle state, and to realize the longitudinal and lateral speed as well as the yaw rate of the vehicle during the driving process. The simulation and the real vehicle test results show that based on the adaptive robust unscented particle filter algorithm, the vehicle driving state estimation can be realized, the measurement parameters can be effectively filtered, and the estimation accuracy is high. [ABSTRACT FROM AUTHOR]

This study presents a dynamic model of a passenger vehicle and analyzes its dynamic characteristics and responses. A dynamic vehicle model with seven degrees of freedom was established to analyze the behavior of a driving vehicle. The vehicle model had three degrees of freedom for the sprung mass's motion and four degrees for the unsprung masses. For this model, the equations of motion were derived using Lagrange's equation. To verify the model, the suspension deformations computed using the model were compared with those measured through three actual vehicle driving tests: the slalom, double lane change, and step steer tests. Furthermore, we investigated the effects of suspension stiffness, suspension damping, and anti-roll bar torsional stiffness on the dynamic characteristics and responses of the vehicle model. This study presented a new full-car model that can analyze a turning vehicle's behavior in response to changes in the steering angle input. The developed dynamic vehicle model may help vehicle designers predict the dynamic responses of a vehicle through simulation without performing a driving test. [ABSTRACT FROM AUTHOR]

Deep-sea mining vehicles (DSMVs) are highly prone to sinking and slippage when traveling on extremely soft seafloor sediments. In addition, DSMVs can be vulnerable to dangerous situations such as overturning due to the non-homogeneous characteristic of the seafloor sediments, the heavy loads carried by DSMVs, and the complex and varied topography of the seafloor. When the terrain is uneven, four-tracked DSMVs can show excellent traveling abilities and safety performances compared with conventional dual-tracked vehicles, thus having a broad range of applications. Consequently, modeling and simulation of a four-tracked DSMV are essential for the study of DSMV traveling performance. To enhance adaptability to uneven terrain, the tracks are designed to be rotatable. First, a multi-body dynamics model is built in the Recurdyn software based on the actual structural properties of a specially designed four-tracked DSMV prototype. Then, the model's forces are modified to reflect the actual circumstances of seafloor travel. Applying a more accurate shear model, a user subroutine is written to modify the track–soil force. Moreover, internal resistance and water resistance are considered and applied to the model in the form of external loads. Then, based on the multi-pass effect, the track–soil force to the rear track is modified. Moreover, considering the relationship between soil forces and velocity, a velocity coefficient is summarized and added to the resistance estimation equation. Consequently, a more realistic dynamic model of the mining vehicle has been developed. On this basis, simulations of straight-line travel on flat ground are performed. In addition, to investigate the effects of rotatable tracks, a straight-line travel simulation with tracks fixed is also performed. By analyzing the simulation results, the motion features and dynamic characteristics of a four-tracked DSMV with rotatable tracks when traveling in a straight line on flat ground can be studied. [ABSTRACT FROM AUTHOR]

This work presents an approach based on the design by impact scenario and a method for optimizing the design of a numerical model for vehicle impacts. The study aims to predict part failure during the design phase, based on numerical simulation methods that allow a very detailed description of the structure's dynamic behavior and resulting phenomena. Subsequently, it is possible to identify the areas of improvement and the optimization choices to ensure the design's robustness. The application concerns the numerical simulation of frontal impact calculations, allowing studying the structure's dynamic behavior in detail. Two approaches for analyzing the structural dynamic behavior will be identified: the energy absorption method and the avoidance method, which consists of identifying the effort path and the parts that need to be broken, thereby affecting the vehicle's rotation. The techniques and the solutions presented in this paper represent the vehicle design approaches that can be applicable to the robust crashworthiness aspects of passenger cars. They can also serve as inspiration for using advanced simulation technology to develop future safety strategies. [ABSTRACT FROM AUTHOR]

Copyright of China Mechanical Engineering is the property of Editorial Board of China Mechanical Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Three dynamic models (1-D, 2-D, and 3-D) of a soil compactor are established to research the vehicle's ride comfort via numerical simulation and experiment. Based on the efficiency of the semi-active control (SAC) of the Fuzzy-PID controller and the negative stiffness structure (NSS), a new suspension of the driver's seat equipped with the SAC and NSS is proposed to further improve the soil compactor's ride comfort under the various working conditions of the vehicle on the elastoplastic soil ground. The reduction of the root-mean-square seat acceleration (aws) in the time domain and the power-spectral-density seat acceleration (PSD) in the frequency domain is chosen as the objective function. The study indicates that the seat's acceleration response in the time domain with the 1-D, 2-D, and 3-D models of the soil compactor is similar. However, the aws and maximum PSD acceleration of the driver's seat with the 1-D model are higher than that of the 3-D model by 35.9% and 58.5%, while the acceleration response and PSD acceleration of the driver's seat with the simulation of the 3-D model are similar to the experiment. Therefore, the different dynamic models of the vehicle remarkably affect the investigation result. With the driver's seat suspension equipped with the SAC and NSS, the aws and maximum PSD acceleration of the driver's seat are strongly decreased by 80.1% and 87.6% compared to the seat's passive suspension without the SAC and NSS. Additionally, these values are also lower than that of oth the SAC and NSS under various simulation conditions. Consequently, the driver's seat suspension equipped with the SAC and NSS could be used to further improve the ride comfort of the soil compactor. [ABSTRACT FROM AUTHOR]

The differential steering can be used not only as the backup system of steer-by-wire, but also as the only steering system. Because the differential steering is realized through the differential moment between the coaxial left and right driving wheels, the sharp reduction of the load on the inner driving wheel will directly lead to the failure of the differential steering when the four-wheel independent drive electric vehicle approaches the rollover. Therefore, this paper not only realizes the trajectory tracking of autonomous ground vehicle through the differential steering, but also puts forward the body attitude control to improve the handling stability. Firstly, the dynamic and kinematic models of differential steering autonomous ground vehicle (DSAGV) and its roll model are established, and the linear three-degree of freedom vehicle model is selected as the reference model to generate the ideal body roll angle. Secondly, a model predictive controller (MPC) is designed to control the DSAGV to track the given reference trajectory, and obtain the required differential moment and the resulting front-wheel steering angle. Then, a sliding mode controller (SMC) is adopted to control the DSAGV to track the ideal body roll angle, and obtain the required roll moment. The simulation results show that the proposed MPC and SMC can not only make the DSAGV realize the trajectory tracking, but also achieve the body attitude control. [ABSTRACT FROM AUTHOR]

• Dynamic model of the tracked vehicle considered this type of forces which is traction, hydrodynamic, centrifugal, lateral friction, longitudinal resistive, bulldozing, and compaction force. • Path tracking is vital in autonomous vehicles since it is designed to deliver appropriate steering, throttle, and brake input to control the vehicle's direction and speed along a predefined path. • Model Predictive Control (MPC) may handle system limits and future predictions. • The objective of a path tracking controller is to eliminate any variation in vehicle direction from the specified path. This paper provides a review of path tracking strategies used in autonomous vehicle control design. Several elements of modelling process and path tracking control are examined, including the vehicle model implemented, the path tracking control algorithms used, and the criteria for evaluating the controller's performance. Path tracking control is classified into several forms based on its methodology and linearity. Vehicle models are grouped into numerous types based on the linearity and the intended behaviour to be observed. This study explores each of these strategy in terms of the applicability and disadvantages/advantages. The main challenges in the field of path tracking control are defined and future research directions are offered based on the critical reviews. Based on the entire review, a model-based controller based on a linear vehicle model and assessed with hardware-in-the-loop (HIL) is suggested. This review is aimed to serve as a starting point for determining which controllers to use in path tracking control development for an autonomous tracked vehicle. [ABSTRACT FROM AUTHOR]

Vehicle mass is an important parameter for motion control of intelligent vehicles, but is hard to directly measure using normal sensors. Therefore, accurate estimation of vehicle mass becomes crucial. In this paper, a vehicle mass estimation method based on fusion of machine learning and vehicle dynamic model is introduced. In machine learning method, a feedforward neural network (FFNN) is used to learn the relationship between vehicle mass and other state parameters, namely longitudinal speed and acceleration, driving or braking torque, and wheel angular speed. In dynamics-based method, recursive least square (RLS) with forgetting factor based on vehicle dynamic model is used to estimate the vehicle mass. According to the reliability of each method under different conditions, these two methods are fused using fuzzy logic. Simulation tests under New European Driving Cycle (NEDC) condition are carried out. The simulation results show that the estimation accuracy of the fusion method is around 97%, and that the fusion method performs better stability and robustness compared with each single method. [ABSTRACT FROM AUTHOR]

For traditional predictor-corrector guidance algorithm for reentry glide vehicle, it cost a lot of time to obtain predicted flight range with a slow speed to iterate. In this paper, according to residual network (ResNet)'s block and dynamic model of vehicle, through analyzing the characteristics of predicted flight range with constraints, the flight range prediction block and flight range prediction neural network are designed, which can obtain the predicted range accurately and quickly; then aiming at the separation between guidance logic and no-fly zone avoidance logic, which may lead to guidance failure and increasing of the sign variation number of the bank angle, the no-fly zone crossrange and the no-fly zone mapping crossrange are proposed in this paper. According the repulsion force of artificial potential field, an adaptive crossrange corridor combining guidance logic and no-fly zone avoidance logic is proposed, and the convergence of the corridor is analyzed theoretically. Through simulation, the block number of flight range prediction network is determined firstly. By this method, the efficiency of lateral guidance can be improved. Then, through the simulation with the different no-fly zones under different disturbed conditions, the stability and validity of the guidance method are verified. Finally, compared with other predictor-corrector algorithms, the proposed method can realize guidance with less sign variation number of bank angle and better avoidance for no-fly zones. [ABSTRACT FROM AUTHOR]

In complex driving scenarios, automated vehicles should behave reasonably and respond adaptively with high computational efficiency. In this paper, a computational efficient motion planning method is proposed, which considers traffic interaction and accelerates calculation. Firstly, the behavior is decided by connecting the points on the unequally divided road segments and lane centerlines, which simplifies the decision-making process in both space and time span. Secondly, as the dynamic vehicle model with changeable longitudinal velocity is considered in the trajectory generation module, the C/GMRES algorithm is used to accelerate the calculation of trajectory generation and realize on-line solving in nonlinear model predictive control. Meanwhile, the motion of other traffic participants is more accurately predicted based on the driver's intention and kinematics vehicle model, which enables the host vehicle to obtain a more reasonable behavior and trajectory. The simulation results verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Copyright of Przeglad Elektrotechniczny is the property of Przeglad Elektrotechniczny and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This article proposes a nonlinear observer for estimating a powertrain transmitted torque of vehicles equipped with dual-clutch transmissions. A new dynamical model of vehicle driveline is presented. It introduces a single characteristic state based on the dynamic friction model to scale the clutch torque capacity, which is available from the actuator position-to-torque map. Based on this model, the generated torque on the clutch disk can be effectively estimated in real time, and the sensitivity of the estimated value caused by high gain feedback can be reduced in the observer. Also, the engine torque uncertainty is estimated from the integrated driveline model. The Lyapunov-based analysis is presented to prove the convergence of the proposed observer. The effectiveness of the proposed method is shown by experimental validations on a test vehicle that allows for real measurements of the input shaft torque of transmission. [ABSTRACT FROM AUTHOR]

In order to improve the safety and reliability of the hypersonic flight vehicle, a sliding mode observer-based fault detection scheme is applied in this paper to handle the actuator fault detection issue, including stuck fault detection and PLOE fault detection. A dynamic linear model with uncertainty is first derived from the original nonlinear hypersonic flight vehicle model by using Taylor's linearization approach at the equilibrium point. Secondly, the actuator fault model, reflecting stuck faults and PLOE faults, is constructed. Then, a sliding mode-based fault detection observer, considering system decomposition, is developed based on the linearized hypersonic flight vehicle model. At last, the designed sliding mode observer is applied to the original nonlinear hypersonic flight vehicle for single-input, single-style actuator fault detection. The simulation results show that stuck faults and big proportion PLOE faults can be timely and accurately detected at the fault time, and the stuck actuator fault from input 3 can cause a deadly impact to the hypersonic flight vehicle, which deserves much more attention than the actuator faults from the other three inputs. Meanwhile, the detection of a small proportion of PLOE faults encounters some difficulties and needs special attention and further investigation. [ABSTRACT FROM AUTHOR]

The present paper is concerned with the wayset-based guidance of underactuated multirotor aerial vehicles (MAVs). A hierarchical guidance and control structure is first established, in which the guidance is realized as a supervisory loop. The lower-level stabilizing attitude and position control laws are assumed to be available. On the other hand, the outer-loop guidance is designed based on a fixed-horizon tube-based robust model predictive control (MPC), which conducts the MAV to visit a given sequence of waysets, without violating their state and control bounds, and allowing the vehicle to rest in each wayset for a specified period. The MPC is designed using a reduced-order closed-loop dynamic model describing the vehicle's translation, which is derived considering the stabilizing position and attitude control laws and the assumption of a time-scale separation between the closed-loop translational and rotational dynamics. This model is put into a discrete-time linear state–space representation subject to additive bounded random disturbance and measurement noise. The properties of the proposed method, which includes the MPC recursive feasibility and robust stability as well as the overall guidance feasibility, are analytically studied. The method is also numerically evaluated using a realistic quadrotor dynamic model, showing its effectiveness and confirming its properties. • Wayset-based supervisory guidance loop for underactuated multirotor aerial vehicles. • Wayset transitions based on dual-mode tube-based robust model predictive control. • Proof of recursive feasibility, robust stability, and overall guidance resolvability. • Obtained performance and low computational burden encourage real-time implementation. [ABSTRACT FROM AUTHOR]

Based on the predigestion of the dynamic model of the intelligent firefighting vehicle, a linear 2‐DOF lateral dynamic model and a preview error model are established. To solve the problems of a highly non‐linear vehicle model, time‐varying parameters, output chattering, and poor robustness, the Radial Basis Function neural network sliding mode controller is designed. Then, different driving speeds are used to conduct simulation tests under standard double‐shifting and smooth curve road conditions, and the simulation results are used to analyse the tracking effect of the lateral motion controller on the desired path. The simulation results reveal that the controller designed has high accuracy in tracking the desired path and has good robustness to the disturbance of intelligent firefighting vehicle speed changes. [ABSTRACT FROM AUTHOR]

To improve the multidirectional motion control accuracy and driving stability of Distributed Drive Autonomous Vehicles (DDAVs) under extreme conditions, the extreme speed estimation method based on dynamic boundary and the multidirectional motion coupling control law design method based on multi degrees of freedom vehicle dynamic model are proposed. The extreme speed estimation method identifies the stable state of DDAVs by the dynamic boundary composed of yaw rate, sideslip angle and roll angle, and then estimates the extreme speed of the vehicle. The design method of multidirectional motion coupling control law adopts eight-degrees-of-freedom (8-DOF) vehicle dynamic model to design path tracking control law, speed tracking control law, yaw stability control law, and active suspension control law at the same time, so as to realize multidirectional motion coupling control. Based on the above method, the Multidirectional Motion Coupling Control System (MMCCS) of DDAVs is designed. The effectiveness of the proposed method is verified by double-line-shifting and serpentine driving simulations under different road adhesion conditions. The superiority of the method is proved by comparing the existing integrated control method. [ABSTRACT FROM AUTHOR]

A path following control strategy for a four-wheel-independent-drive electrical vehicle (4WID-EV) based on backstepping and model predictive control is presented, which can ensure the accuracy of path following and maintain vehicle stability simultaneously. Firstly, a 2-DOF vehicle dynamic model and a path following error model are built and the desired yaw rate is obtained through backstepping. Then, a model predictive controller is adopted to track the desired yaw rate and obtain the optimal front wheel steering and external yaw moment. Meanwhile, an optimal torque distribution algorithm is carried out to allocate it to each tire. Finally, the effectiveness and superiority of the strategy is validated via CarSim–Simulink joint simulation. Results show that the strategy has higher following accuracy, smaller sideslip angle, and better yaw rate tracking. [ABSTRACT FROM AUTHOR]

This paper presents a novel algorithm that aims to estimate an accurate dynamic model for a vehicle suspension system. The proposed method addresses the uncertainties associated with the system model and unknown road input by incorporating complementary terms. These terms are calculated using information from accelerometers installed on both the sprung and unsprung masses. To correct measurement errors, including bias and noise, the paper suggests fusing the accelerometer data with displacement data. The paper further introduces an adaptive solution for adjusting the estimator coefficients, enabling effective data fusion. An experimental implementation is conducted on a quarter-car suspension platform, equipped with additional sensors to verify the estimated responses. Comparative results with the unknown-input Kalman filter highlight the superior accuracy of the proposed estimator in constructing a precise dynamic model for the system. Additionally, the results demonstrate the effectiveness of data fusion-based adaptive tuning of the estimator coefficients in correcting measurement errors. • Novel estimation of accurate dynamic model for vehicle suspension system. • Suggesting data fusion to correct measurement errors of accelerometers. • Adaptive solution for adjusting the estimator gains for effective data fusion. • Stochastic analysis of the proposed estimation algorithm. • Experimental implementation of the estimator on a quarter-car suspension platform. [ABSTRACT FROM AUTHOR]

• A navigation accuracy compensation algorithm for INS is proposed for low-cost USVs. • An event-triggering mechanism is introduced, and the thrust models of the USVs are adopted to design the event trigger. • According to different events, various weights can be assigned to various integrators and PF. • Field experiments are conducted to verify the navigation performance of our algorithm. Integrated navigation is often used for navigation of unmanned surface vehicles (USVs). For a class of cost-sensitive USVs, it is desirable to compose integrated navigation by low-cost inertial navigation systems (INS) and global positioning systems (GPS). In the cases of GPS signal failure or interference, only INS onboard can be used for navigation, which often leads to the navigation accuracy deteriorating and may fail to meet application requirements. Therefore, a navigation accuracy compensation algorithm for low-cost USVs is proposed. An event-triggering mechanism is introduced, and the thrust models of the USVs are adopted to design the event trigger. According to different events, various weights can be assigned to the integrator based on INS, and measurement-based linear velocity V INS and heading angle ψ I N S can be obtained. Moreover, based on dynamic models, the model-based linear velocity V m and heading angle ψ m also can be calculated. Meanwhile, the event trigger is combined with the Particle Filter (PF) algorithm to accurately estimate the linear velocity V ^ P F and heading angle ψ ^ PF for navigation. Finally, field experiments are conducted and the differential GPS (DGPS) is used as the benchmark for comparison. The results show that our algorithm can improve navigation performance for the low-cost USVs. [ABSTRACT FROM AUTHOR]

Rule-based traditional motion planning methods usually perform well with prior knowledge of the macro-scale environments but encounter challenges in unknown and uncertain environments. Deep reinforcement learning (DRL) is a solution that can effectively deal with micro-scale unknown and uncertain environments. Nevertheless, DRL is unstable and lacks interpretability. Therefore, it raises a new challenge: how to combine the effectiveness and overcome the drawbacks of the two methods while guaranteeing stability in uncertain environments. In this study, a multi-constraint and multi-scale motion planning method is proposed for automated driving with the use of constrained reinforcement learning (RL), named RLTT, and comprising RL, a topological reachability analysis used for vehicle path space (TPS), and a trajectory lane model (TLM). First, a dynamic model of vehicles is formulated; then, TLM is developed on the basis of the dynamic model, thus constraining RL action and state space. Second, macro-scale path planning is achieved through TPS, and in the micro-scale range, discrete routing points are achieved via RLTT. Third, the proposed motion planning method is designed by combining sophisticated rules, and a theoretical analysis is provided to guarantee the efficiency of our method. Finally, related experiments are conducted to evaluate the effectiveness of the proposed method; our method can reduce 19.9% of the distance cost in the experiments as compared to the traditional method. Experimental results indicate that the proposed method can help mitigate the gap between data-driven and traditional methods, provide better performance for automated driving, and facilitate the use of RL methods in more fields. [ABSTRACT FROM AUTHOR]

To improve the overall performance of four-wheel steering vehicles under different working conditions and solve the problem of the unbalanced comprehensive control effect of a single controller, a multi-mode optimal decision control system is proposed based on the linear 2-DOF dynamic model of the vehicle, which can make the vehicle have better performance under different working conditions. The system is composed of multiple controllers, in which the self-tuning dual yaw rate feedback controller can create timely feedback and make adjustments according to the driving state of the vehicle, which is optimal under the condition of a small rotation angle at medium and high speeds. The system can match the corresponding controller according to the optimal performance of different control strategies at different speeds and angles. The simulation results show that the multi-mode optimal selection system can make the vehicle perform optimally under different working conditions, and that comprehensive performance is more prominent than that of a single controller. [ABSTRACT FROM AUTHOR]

As a vital means of transportation to alleviate urban traffic congestion, the metro vehicle has been developing rapidly in China during recent years. For the violent vibration and shock under the frequent switches between traction and braking conditions, higher requirements are put forward in the drive system. The dynamic performance of the traction motor and gearbox, which are the key elements in the drive system of the metro vehicle, is worthy of attention. Based on the classical vehicle–track coupled dynamics and the gear dynamics theory, a vertical–longitudinal dynamics model for a metro vehicle with frame-hung motors and gearboxes is developed in this paper. This model enables the consideration of some complicated excitations, such as external excitations (the track vertical irregularity) and internal excitations (the mesh stiffness and the dynamic transmission error). The established dynamics model is then validated by comparing the simulated results with the field test results in both time domain and time–frequency domain under traction conditions. Consequently, the established dynamics model is demonstrated to be capable of revealing the dynamic performance of the metro vehicle effectively, especially for the traction and transmission system in the entire vehicle vibration environment of a metro. In turn, the results indicate that the gear transmission has a great and lasting effect on the force state of the traction motors and gearboxes compared to its effect on the axle load transfer. [ABSTRACT FROM AUTHOR]

This article formulates a front-wheel-drive three degree-of-freedom (3DOF) four-wheel planar vehicle model with the Magic Formula tire model. The state variables' evolutions of the model, i.e., trajectories of the model under acceleration and deacceleration conditions, are analyzed. The process of evolution is divided into desirable and undesirable phases based on the response characteristics of the vehicle to the driver input during the process. The trajectories are categorized as unsaturated trajectories and saturated trajectories by the existence of saturated tires during these phases. The response of state variables to driver input under acceleration conditions during undesirable phases are zero or even opposite, while the response of undesirable phases under the deacceleration condition is partially positive. Besides, the existing yaw rate safety envelope is recalibrated by using a longitudinal and lateral tire force coupling model. A more accurate yaw rate safety envelope is obtained from the given driver input. Furthermore, a longitudinal speed safety envelope is proposed according to the relationships among slip angle, yaw rate, and longitudinal speed. These safety envelopes are determined by driver input, tire properties, and grip condition. After overlaying yaw rate and longitudinal speed safety envelopes in the state space, the feasibility of using the safety envelope as trajectory classification criteria is discussed. [ABSTRACT FROM AUTHOR]

This study proposes an improved dynamic substructuring model using the estimated frequency response function information at coupling points between substructures. An assembled system generally consists of two or more substructures connected by a bolt. Individual substructure evaluation excluding the effects of other components is important in the development stage of a general mechanical system because the vibro-acoustic performance of the system depends on the specific combination of substructures. Therefore, this study predicted the final coupling system performance using information from the initial evaluation of the individual substructures. Accurate measurements of the joint properties are required to accurately estimate the dynamic assembled system characteristics; however, physical constraints typically limit such measurements at actual coupling points. Accordingly, a method that utilizes generalized coupling properties to estimate the dynamic characteristics of a new coupling system based on the characteristics of an original substructure is proposed. Virtual point transformation is then used to estimate accurate frequency response functions at the coupling points of the assembled system based on convenient measurements. The proposed method was validated using a vehicle suspension that was hard mounted in a test jig and onto an actual vehicle body to estimate the vibration characteristics of the assembled system. The findings of this study contribute to the accurate estimation of the dynamic properties of many real-world bolt-assembled systems. [ABSTRACT FROM AUTHOR]

An eight-degree-of-freedom vehicle dynamic model with electromechanical coupling was established for a four-wheel-independent-drive electric vehicle (4WID-EV). Based on the single-point preview optimal curvature theory, an adaptive fuzzy PID driver model with lateral acceleration feedback was designed, and the control of vehicle trajectory tracking was achieved in the driver-vehicle-road closed-loop coupling model. With the sideslip angle and yaw rate as control variables, the upper layer of a fuzzy sliding mode controller and the lower layer of an optimal distribution controller of the yaw moment were designed. The optimal longitudinal forces of four driving wheels were determined to achieve vehicle-handling stability. J-turn, fishhook, and snake-shaped pile simulations were carried out in MATLAB/Simulink. The results showed that the fuzzy sliding mode controller significantly improved the driving stability of the system, and it had a better anti-chattering ability than the sliding mode control strategy. The established lateral acceleration feedback adaptive fuzzy PID driver model had good trajectory tracking ability. Integration of the two controllers can better achieve both trajectory tracking and driving stability of a 4WID-EV. [ABSTRACT FROM AUTHOR]

Reverse Horizontal Curves (RHCs) are among the most accident-prone road points, with many annual fatalities and injuries. These fatalities can increase dramatically if the RHCs and longitudinal slopes are combined. The importance of increasing the safety of RHCs, especially in mountainous routes, is doubled due to the possibility of combining RHCs with vertical extensions or combining them with so-called steep slopes. This study used vehicle dynamic modeling to evaluate the lateral friction of various vehicles. Including the E-Class Sedan, E-Class SUV, Truck, and Bus, moving on RHCs combined with a longitudinal slope (downgrade, upgrade, and direct distance). Then, the RHC lateral friction model was presented using the multiple regression model based on the effective parameters, including design speeds, direct distance, and different longitudinal slopes. The results showed that speed, longitudinal slope, and vehicle type had the most impact, and direct distance had the most negligible impact in friction coefficient models. Based on the modeling results, the higher the design's speed and the shorter the direct distance, the lower the lateral friction coefficient for the Sedan and SUV. Hence, the safety of the vehicles is greater. For trucks, reduced speed, increased direct distance, and reduced slope led to increased safety. In the results, the most critical state was the lateral friction coefficient at a speed of 80 km/h and a direct distance of 116 m for the SUV. [ABSTRACT FROM AUTHOR]

The levitation bogie of the TR-series maglev vehicle is redesigned by adding an intermediate buffer layer between the levitationbogie and the levitation module to improve the curve negotiation capacity of the high-speed maglev vehicle and reduce the vertical coupleddynamic effect of the vehicle and the track beam. As the existing TR08 maglev vehicle dynamic model has been verified by experiments, anew type of dynamic model of maglev vehicle is constructed by transplanting the functional module of TR08 model. The vehicle-elastic trackbeam coupled dynamic model and the vehicle-curved track dynamic model are established. Simulation analyses of the dynamic response ofvehicles and track beams show that: the curve negotiation capacity of the new-type maglev vehicle is better than that of TR08 type maglevvehicle; the resonance effect does not occur between the vehicle and the track beam; the vertical dynamic displacement of the track beammid-span decreases by 23% compared with the TR08 type; the redesigned levitation bogie structure and the track beam have less dynamicinteraction, indicating that the working environment of the electromagnet in the new maglev vehicle has been improved, which can effectivelyreduce the burden of electrical decoupling of the control system. [ABSTRACT FROM AUTHOR]

An advanced LKS (lane keeping system) for use on curving roads is presented to maintain autonomous vehicle driving within the target lane, without unintentional lane departure. There are the following two main objectives in designing this system: one is performing perfect lane keeping and the other is ensuring the dynamic stability of the vehicle, especially when driving on a curving and low-friction road with time-varying high speed. In this paper, a combined vehicle model, consisting of a lane keeping model and a vehicle lateral dynamic model, is firstly introduced. Then, a novel adaptive-weight predictive controller is used to calculate the desired steering angle and the additional yaw moment which provide coordinated control forlane keeping and dynamic stability control. Meanwhile, a square-root cubature Kalman filter-based vehicle sideslip angle observer, with a strong tracking theory modification (ST-SRCKF), is established to estimate the sideslip angle during the driving process. Finally, HIL (hardware-in-the-loop) tests and field tests are constructed, and the results show the effectiveness of our proposed LKS controller and ST-SRCKF sideslip angle estimation. [ABSTRACT FROM AUTHOR]