Search

Protein therapeutics are essential in the treatment of various diseases, but most of them require parenteral administration. Since intravenous and subcutaneous injections are associated with discomfort and pain, other routes have been investigated including intradermal microneedle delivery. Microneedles are shorter than hypodermic needles and therefore minimize contact with pain receptors in deeper skin layers. But the differences in anatomical and physiological characteristics of dermis and subcutis can potentially result in varying protein penetration through the skin, absorption, and metabolism. This review summarizes pharmacokinetic studies that compare the administration of protein therapeutics by subcutaneous injections and different types of microneedles intradermally including hollow, dissolvable, coated, and hydrogel-forming microneedles. Across animal and human studies, hollow microneedle delivery resulted in quicker and higher peak plasma levels of proteins and comparable bioavailability to subcutaneous injections potentially due to the extensive network of lymphatic and blood vessels in the dermis. In case of dissolvable and coated microneedles, drug release kinetics depend on component materials. The dissolution of polymer excipients can slow the release and permeation of protein therapeutics at the administration site and thereby delay absorption. The understanding of drug penetration through different skin layers, its absorption into blood capillaries or lymphatics, and dermal metabolism remains limited. Additionally, the effects of these processes on the differences in pharmacokinetic profiles of proteins following intradermal microneedle administration are not well understood. Greater insights are required for the development of the next generation of intradermal microneedle biotherapeutics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

This review article delves into the extensive use of microneedles in ocular therapy, emphasizing their efficacy in delivering drug substances to the posterior region of the eye. The conventional methods of drug delivery, while widely employed, are marred by inherent drawbacks such as neovascularization, abrasion, and infiltration. To address these limitations, the review explores various approaches to microneedle fabrication, shedding light on the diverse materials employed in the process. Furthermore, the article meticulously examines the delivered drug substances using distinct microneedle approaches and their applications in ocular therapy. By critically evaluating the drawbacks associated with conventional ophthalmic drug delivery, the review seeks to pave the way for a paradigm shift. It advocates for a novel approach centered around minimally invasive microneedles, presenting them as a promising solution to overcome the limitations of current drug delivery methods. The comprehensive discussion within this article not only offers insights into the fabrication techniques and materials used for microneedles but also provides a nuanced understanding of the applications and advantages associated with this innovative approach. As the exploration of microneedle technology continues to evolve, this review serves as a valuable resource for researchers, clinicians, and pharmaceutical professionals seeking to enhance ocular therapy by embracing the potential of minimally invasive microneedles., (Copyright © 2024 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.)

Treatment for Parkinson's disease (PD) has been impeded by inefficient treatment results and multiple membrane barriers during drug delivery. This study reports the design, synthesis, and application of microneedles (MNs) loaded with mitochondrion-targeted liposome encapsulated iron (Fe)-isolated single-atom nanozymes (Mito@Fe-ISAzyme, MFeI), called MFeI MNs, for in situ drug delivery into the brain parenchyma and efficient enrichment of drugs in lesion sites. In in vitro experiments, MFeI can scavenge reactive oxygen species (ROS) and protect the neurons via mitochondrial targeting, guaranteeing the subsequent treatment of PD. Using PD mouse models, we compared the intravenous injection of MFeI with the brain in situ administration of MFeI MNs (in situ MFeI MNs). Results showed that in situ MFeI MNs significantly improved the deep penetration of the drug into brain parenchyma, especially in the vital pathological sites such as the substantia nigra pars compacta and striatum. Importantly, ROS elimination and neuroinflammatory remission in the lesion site were observed, thereby efficiently alleviating the behavioral disorders and pathological symptoms of PD mice. Therefore, the MNs system for in situ single-atom nanozyme liposome delivery exhibits great potential in PD treatment., (© 2024. The Author(s).)

Transdermal drug delivery (TDD) is an attractive route of administration, providing several advantages, especially over oral and parenteral routes. However, TDD is significantly restricted due to the barrier imposed by the uppermost layer of the skin, the stratum corneum (SC). Microneedles is a physical enhancement technique that efficiently pierces the SC and facilitates the delivery of both lipophilic and hydrophilic molecules. Dissolving microneedles is a commonly used type that is fabricated utilizing various biodegradable and biocompatible polymers, such as polylactic acid, polyglycolic acid, or poly(lactide- co -glycolide) (PLGA). Such polymers also promote the prolonged release of the drug due to the slow degradation of the polymer matrix following its insertion. We selected carfilzomib, a small therapeutic peptide ( M W 4.19), as a model drug to fabricate a microneedle-based sustained delivery system. This study is a proof-of-concept investigation in which we fabricated PLGA microneedles using four types of PLGA (50-2A, 50-5A, 75-5A, and 50-7P) to evaluate the feasibility of long-acting transdermal delivery of carfilzomib. Micromolding technique was used to fabricate the PLGA microneedles and characterization tests, including Fourier transform infrared spectroscopy, insertion capability using the skin simulant Parafilm model, histological evaluation, scanning electron microscopy, and confocal microscopy were conducted. P 4.19), as a model drug to fabricate a microneedle-based sustained delivery system. This study is a proof-of-concept investigation in which we fabricated PLGA microneedles using four types of PLGA (50-2A, 50-5A, 75-5A, and 50-7P) to evaluate the feasibility of long-acting transdermal delivery of carfilzomib. Micromolding technique was used to fabricate the PLGA microneedles and characterization tests, including Fourier transform infrared spectroscopy, insertion capability using the skin simulant Parafilm model, histological evaluation, scanning electron microscopy, and confocal microscopy were conducted. In vitro -methyl pyrrolidone was utilized as the organic solvent and microneedles were solidified in controlled conditions, which led to good mechanical strength. Both N -methyl pyrrolidone was utilized as the organic solvent and microneedles were solidified in controlled conditions, which led to good mechanical strength. Both in vitro release and permeation testing showed sustained profiles of carfilzomib over 7 days. The release and permeation were significantly influenced by the molecular weight of PLGA and the lipophilic properties of carfilzomib.

Gouty arthritis (GA) is caused by monosodium urate (MSU) crystals deposition. GA is difficult to cure because of its complex disease mechanism and the tendency to reoccur. GA patients require long-term uric acid-lowering and anti-inflammatory treatments. In the past ten years, as a painless, convenient and well-tolerated new drug transdermal delivery method, microneedles (MNs) administration has been continuously developed, which can realize various drug release modes to deal with various complex diseases. Compared with the traditional administration methods (oral and injection), MNs are more conducive to the long-term independent treatment of GA patients because of their safe, efficient and controllable drug delivery ability. In this review, the pathological mechanism of GA and common therapeutic drugs for GA are summarized. After that, MNs drug delivery mechanisms were summarized: dissolution release mechanism, swelling release mechanism and channel-assisted release mechanism. According to drug delivery patterns of MNs, the mechanisms and applications of rapid-release MNs, long-acting MNs, intelligent-release MNs and multiple-release MNs were reviewed. Additionally, existing problems and future trends of MNs in the treatment of GA were also discussed. STATEMENT OF SIGNIFICANCE: Gout is an arthritis caused by metabolic disease "hyperuricemia". Epidemiological studies show that the number of gouty patients is increasing rapidly worldwide. Due to the complex disease mechanism and recurrent nature of gout, gouty patients require long-term therapy. However, traditional drug delivery modes (oral and injectable) have poor adherence, low drug utilization, and lack of local localized targeting. They may lead to adverse effects such as rashes and gastrointestinal reactions. As a painless, convenient and well-tolerated new drug transdermal delivery method, microneedles have been continuously developed, which can realize various drug release modes to deal with gouty arthritis. In this review, the material structure, design strategy and future outlook of microneedles for treating gouty arthritis will be reviewed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Oral ulcers are a common oral mucosal disease that seriously affect the quality of life. Traditional drug treatments have shown unsatisfactory efficacy and potential adverse reactions. In this study, curcumin-loaded multifunctional magnesium metal-organic framework-embedded hyaluronic acid-soluble microneedles patches were developed to optimize treatment strategies for oral ulcers. This microneedles patch achieves efficient release of curcumin and Mg 2+ in the ulcer through precisely targeted delivery and controllable release mechanism, significantly regulates inflammation, promotes cell migration and angiogenesis, and accelerates the ulcer healing process. At the same time, the synergistic effect of curcumin and gallic acid effectively alleviated oxidative stress, while the backplate ε-poly-L-lysine and needle tip Mg 2+ jointly constructed an antibacterial barrier to effectively inhibit pathogens. Verification using an oral ulcer rat model showed that the microneedles patch exhibited excellent therapeutic effects. This not only opens up a new avenue for clinical oral treatment but also marks a breakthrough in nanobiomaterials science and drug delivery technology and heralds a broad prospect in the field of oral ulcer treatment in the future., (© 2024. The Author(s).)

Microneedles (MNs) have gained increasing attention in the biomedical field, owing to their notable advantages over injectable and transdermal preparations. The mechanical properties of MNs are the key to determine whether MNs can puncture the skin for efficient drug delivery and therapeutic purposes. However, there is still lacking of a systemic summary on how to improve the mechanical properties of MNs. Herein, this review mainly analyzes the key factors affecting the mechanical properties of MNs from the theoretical point of view and puts forward improvement approaches. First, we analyzed the major stresses exerted on the MNs during skin puncture and described general methods to evaluate the mechanical properties of MNs. We then provided detail examples to elucidate how the physicochemical properties of single polymer, formulation compositions, and geometric parameters affected the mechanical properties of MNs. Overall, the mechanical strength of MNs can be enhanced by tuning the crosslinking density, crystallinity degree, and molecular weight of single polymer, introducing polysaccharides and nano-microparticles as reinforcers to form complex with polymer, and optimizing the geometric parameters of MNs. Therefore, this review will provide critical guidance on how to fabricate MNs with robust mechanical strength for successful transdermal drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Hydrogel microneedle patches have emerged as promising platforms for painless, minimally invasive, safe, and portable transdermal drug administration. However, the conventional mold-based fabrication processes and inherent single-functionality of such microneedles present significant hurdles to broader implementation. Herein, we have developed a novel approach utilizing a precursor solution of robust nanocomposite hydrogels to formulate photo-printable inks suitable for the direct 3D printing of high-precision, triple-responsive hydrogel microneedle patches through digital light processing (DLP) technology. The ink formulation comprises four functionally diverse monomers including 2-(dimethylamino)ethyl methacrylate, N-isopropylacrylamide, acrylic acid, and acrylamide, which were crosslinked by aluminum hydroxide nanoparticles (AH NPs) acting as both reinforcing agents and crosslinking centers. This results in the formation of a nanocomposite hydrogel characterized by exceptional mechanical strength, an essential attribute for the 3D printing of hydrogel microneeedle patches. Furthermore, this innovative 3D printing strategy facilitates facile customization of microneedle geometry and patch dimensions. As a proof-of-concept, we employed the fabricated hydrogel microneedles for transdermal delivery of bovine serum albumin (BSA). Importantly, these hydrogel microneedles displayed no cytotoxic effects and exhibited triple sensitivity to pH, temperature and glucose levels, thereby enabling more precise on-demand drug delivery. This study provides a universal method for the rapid fabrication of hydrogel microneedles with smart responsiveness for transdermal drug delivery applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Since human skin is an immune organ, a large number of immune cells are distributed in the epidermis and the dermis of the skin. Transdermal immunotherapy shows great therapeutic advantages in innate immunotherapy and adaptive immunotherapy. To solve the problem that macromolecules are difficult to penetrate into the skin, the microneedle technology can directly break through the skin barrier using micron-sized needles in a non-invasive and painless way for transdermal drug delivery. Therefore, it is considered to be an effective technology to increase drug transdermal absorption. In this review, the types of preparation, the combinations with different techniques and the mechanisms of microneedles in transdermal immunotherapy were summarized. Compared with traditional immunotherapy like intramuscular injection and subcutaneous injection, the microneedle has many advantages in transdermal immunotherapy, such as reducing patient pain, enhancing vaccine stability, and inducing stronger immune responses. Although there are still some limitations to be solved, the application of microneedle technology in transdermal immunotherapy is undoubtedly a promising means of drug delivery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microneedle (MN) patches are gaining increasing attention as a cost-effective technology for delivering drugs directly into the skin. In the present study, two different 3D printing processes were utilized to produce coated MNs, namely, digital light processing (DLP) and semisolid extrusion (SSE). Donepezil (DN), a cholinesterase inhibitor administered for the treatment of Alzheimer's disease, was incorporated into the coating material. Physiochemical characterization of the coated MNs confirmed the successful incorporation of donepezil as well as the stability and suitability of the materials for transdermal delivery. Optical microscopy and SEM studies validated the uniform weight distribution and precise dimensions of the MN arrays, while mechanical testing ensured the MNs' robustness, ensuring efficient skin penetration. In vitro studies were conducted to evaluate the produced transdermal patches, indicating their potential use in clinical treatment. Permeation studies revealed a significant increase in DN permeation compared to plain coating material, affirming the effectiveness of the MNs in enhancing transdermal drug delivery. Confocal laser scanning microscopy (CLSM) elucidated the distribution of the API, within skin layers, demonstrating sustained drug release and transcellular transport pathways. Finally, cell studies were also conducted on NIH3T3 fibroblasts to evaluate the biocompatibility and safety of the printed objects for transdermal applications.

Hemangiomas are superficial tumors characterized by dense vascular structures that often affect the patient's aesthetic appearance due to the obvious red appearance on the skin. Current treatments, especially timolol maleate in the form of eye drops and hydrogels, suffer from low transdermal drug delivery rates, resulting in prolonged treatment time. To address this challenge, our study introduced a soluble microneedle patch with dextran as the main material to form microcatheters for sustained delivery of timolol maleate. In addition, we proposed a vascular embolization strategy to disrupt the blood supply in hemangiomas. Oxidized cellulose (C-cellulose) was selected for its excellent hemostatic properties. We incorporated C-cellulose into dextran microneedles to facilitate thrombosis in the vascular-rich areas of hemangiomas. The innovative microneedle patch we developed can penetrate the skin to a depth of 430 μm and dissolve rapidly within 3 minutes, ensuring direct drug delivery to the subcutaneous layer. Notably, the treated skin area regained its original appearance within two hours after treatment. In addition to excellent skin permeability and rapid dissolution, these patches significantly promoted apoptosis and inhibited cell migration in mouse hemangioendothelioma EOMA cells. Our results demonstrate that this approach not only achieves significant tumor inhibition in a mouse hemangioma model, but also represents a more effective, convenient, and non-invasive treatment option. Therefore, dextran/C-cellulose/timolol maleate microneedle patch (MNs/Timolol) has broad clinical application prospects in the treatment of hemangiomas, minimizing the risk of additional damage and improving treatment efficacy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

For successful treatment of diseases, sufficient therapeutics must be provided to the body. Microneedle applications in therapeutic delivery and analytics sampling are restricted because of various issues, including smaller area for drug loading and analytics sampling. To achieve sufficient drug loading and analytics sampling and improve drug penetration while maintaining painless administration, patch-type microneedle arrays were designed and fabricated using polymer casting from a conical cavity mold. Microcavities were formed on a carbon plate via micromechanical machining. A porous polymer layer was coated on a microneedle patch (MNP). The pores of the porous polymer layer provided space and channels for drug delivery. A pH-sensitive polymer layer was employed to cap the porous polymer layer, which prevented drug leakage during storage and provided a stimulus drug release in response to body pH conditions. The drug can be delivered through holes connected to both sides of the patch. The drug release of the MNP was investigated in vitro and in vivo and showed conceptual proof that these MNs have the potential to enhance treatment protocols for various diseases with the flexibility of coating and therapeutic materials and offer significant scope for further variations and advancement., (© 2024. The Author(s).)

Curcumin, a polyphenol extracted from turmeric, is a potential alternative for the treatment of oral squamous cell carcinoma (OSCC) due to its remarkable anticancer activity and low systemic toxicity. To further enhance the anticancer activity and bioavailability of curcumin, we synthesized a curcumin analogue, AC17, by modifying the benzene ring and methylene group of curcumin. A soluble hyaluronic acid microneedle patch (AC17@HAMN) was developed to ensure accurate and safe delivery of AC17 to tumor tissues. The inhibitory effect of AC17 on OSCC cells was stronger than that of curcumin and some common analogues. Transcriptome sequencing showed that the target genes of AC17 were mainly concentrated in apoptosis, cell cycle and cell senescence pathways. Among them, AC17 induces cell cycle arrest and inhibits cell proliferation mainly by activating FOXO3 signaling. With good penetration and dissolution properties, microneedles can deliver AC17 directly to the tumor site and show good anti-tumor effect. Moreover, AC17@HAMN showed good biosafety. In summary, AC17@HAMN offers high efficiency, minimal invasiveness, and few adverse reactions. This microneedle patch holds great promise for potential clinical applications, especially for the treatment of OSCC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Transdermal drug delivery refers to the administration of drugs through the skin, after which the drugs can directly act on or circulate through the body to the target organs or cells and avoid the first-pass metabolism in the liver and kidneys experienced by oral drugs, reducing the risk of drug poisoning. From the initial singular approach to transdermal drug delivery, there has been a shift toward combining multiple methods to enhance drug permeation efficiency and address the limitations of individual approaches. Technological advancements have also improved the accuracy of drug delivery. Optimizing insulin itself also enables its long-term release via needle-free injectors. In this review, the diverse transdermal delivery methods employed in insulin therapy and their respective advantages and limitations are discussed. By considering factors such as the principles of transdermal penetration, drug delivery efficiency, research progress, synergistic innovations among different methods, patient compliance, skin damage, and posttreatment skin recovery, a comprehensive evaluation is presented, along with prospects for potential novel combinatorial approaches. Furthermore, as insulin is a macromolecular drug, insights gained from its transdermal delivery may also serve as a valuable reference for the use of other macromolecular drugs for treatment., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Chitosan is an extensively used polymer for drug delivery applications in particulate and non-particulate carriers. Chitosan-based particulate, nano-, and microparticle, carriers have been the most extensively studied for the delivery of therapeutics and vaccines. However, chitosan has also been used in vaccine applications for its adjuvant properties in various hydrogels or as a carrier coating material. The focus of this review will be on the usage of chitosan as a vaccine adjuvant based on its intrinsic immunogenicity; the various forms of chitosan-based non-particulate delivery systems such as thermosensitive hydrogels, microneedles, and conjugates; and the advantages of its role as a coating material for vaccine carriers., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Masimov and Wasan.)

Introduction: Microneedles (MNs) are miniaturized, painless, and minimally invasive platforms that have attracted significant attention over recent decades across multiple fields, such as drug delivery, disease monitoring, disease diagnosis, and cosmetics. Several manufacturing methods have been employed to create MNs; however, these approaches come with drawbacks related to complicated, costly, and time-consuming fabrication processes. In this context, employing additive manufacturing (AM) technology for MN fabrication allows for the quick production of intricate MN prototypes with exceptional precision, providing the flexibility to customize MNs according to the desired shape and dimensions. Furthermore, AM demonstrates significant promise in the fabrication of sophisticated transdermal drug delivery systems and medical devices through the integration of MNs with various technologies., Areas Covered: This review offers an extensive overview of various AM technologies with great potential for the fabrication of MNs. Different types of MNs and the materials utilized in their fabrication are also discussed. Recent applications of 3D-printed MNs in the fields of transdermal drug delivery and biosensing are highlighted., Expert Opinion: This review also mentions the critical obstacles, including drug loading, biocompatibility, and regulatory requirements, which must be resolved to enable the mass-scale adoption of AM methods for MN production, and future trends.

Transdermal administration remains an active research and development area as an alternative route for long-acting drug delivery. It avoids major drawbacks of conventional oral (gastrointestinal side effects, low drug bioavailability, and need for multiple dosing) or parenteral routes (invasiveness, pain, and psychological stress and bio-hazardous waste generated from needles), thereby increasing patient appeal and compliance. This review focuses on the current state of long-acting transdermal drug delivery, including adhesive patches, microneedles, and molecularly imprinted polymeric systems. Each subsection describes an approach including key considerations in formulation development, design, and process parameters with schematics. An overview of commercially available conventional (adhesive) patches for long-acting drug delivery (longer than 24 h), the reservoir- and matrix-type systems under preclinical evaluation, as well as the advanced transdermal formulations, such as the core-shell, nanoformulations-incorporated and stimuli-responsive microneedles, and 3D-printed and molecularly imprinted polymers that are in development, is also provided. Finally, we elaborated on translational aspects, challenges in patch formulation development, and future directions for the clinical advancement of new long-acting transdermal products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Microneedles (MN) have emerged as an innovative technology for drug delivery, offering a minimally invasive approach to administer therapeutic agents. Recent applications have included ocular drug delivery, requiring the manufacture of sub-millimeter needle arrays in a reproducible and reliable manner. The development of 3D printing technologies has facilitated the fabrication of MN via mold production, although there is a paucity of information available regarding how the printing parameters may influence crucial issues such as sharpness and penetration efficacy. In this study, we have developed and optimized a 3D-printed MN micro-mold using stereolithography (SLA) 3D printing to prepare a dissolving ocular MN patch. The effects of a range of parameters including aspect ratio, layer thickness, length, mold shape and printing orientation have been examined with regard to both architecture and printing accuracy of the MN micro-mold, while the effects of printing angle on needle fidelity was also examined for a range of basic shapes (conical, pyramidal and triangular pyramidal). Mechanical strength and in vitro penetration of the polymeric (PVP/PVA) MN patch produced from reverse molds fabricated using MN with a range of shapes and height, and aspect ratios were assessed, followed by ex vivo studies of penetration into excised scleral and corneal tissues. The optimization process identified the parameters required to produce MN with the sharpest tips and highest dimensional fidelity, while the ex vivo studies indicated that these optimized systems would penetrate the ocular tissue with minimal applied pressure, thereby allowing ease of patient self-administration., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Rawan Fitaihi reports financial support was provided by King Saud University College of Pharmacy. D Craig is on the editorial board of IJP If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Neurodegenerative diseases (NDs), particularly dementia, provide significant problems to worldwide healthcare systems. The development of therapeutic materials for various diseases has a severe challenge in the form of the blood-brain barrier (BBB). Transdermal treatment has recently garnered widespread favor as an alternative method of delivering active chemicals to the brain. This approach has several advantages, including low invasiveness, self-administration, avoidance of first-pass metabolism, preservation of steady plasma concentrations, regulated release, safety, efficacy, and better patient compliance. Topics include the transdermal method for therapeutic NDs, their classification, and the mechanisms that allow the medicine to enter the bloodstream through the skin. The paper also discusses the obstacles and potential outcomes of transdermal therapy, emphasizing the benefits and drawbacks of different approaches., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

In recent year, the research of transdermal drug delivery systems has got substantial attention towards the development of microneedles (MNs). This shift has occurred due to multifaceted advantages of MNs as they can be utilized to deliver the drug deeper to the skin with minimal invasion, offer successful delivery of drugs and biomolecules that are susceptible to degradation in gastrointestinal tract (GIT), act as biosensors, and help in monitoring the level of biomarkers in the body. These can be fabricated into different types based on their applications as well as material for fabrication. Some of their types include solid MNs, hollow MNs, coated MNs, hydrogel forming MNs, and dissolving MNs. These MNs deliver the therapeutics via microchannels deeper into the skin. The coated and hollow MNs have been found successful. However, they suffer from poor drug loading and blocking of pores. In contrast, dissolving MNs offer high drug loading. These MNs have also been utilized to deliver vaccines and biologicals. They have also been used in cosmetics. The current review covers the different types of MNs, materials used in their fabrication, properties of MNs, and various case studies related to their role in delivering therapeutics, monitoring level of biomarkers/hormones in body such as insulin. Various patents and clinical trials related to MNs are also covered. Covered are the major bottlenecks associated with their clinical translation and potential future perspectives., (© 2023. Controlled Release Society.)

The transdermal drug delivery based on microneedles (MNs) provides a suitable and painless self-administration for diabetic patients. In this work, the hydrogel-forming MNs were firstly fabricated using poly(vinyl alcohol) (PVA) and chitosan (CS) as matrix. A hypoglycemic drug, metformin (Met), had been loaded into MIL-100(Fe). Then, both of free Met and Met-loaded MIL-100(Fe) were integrated into hydrogel-forming MNs for regulation of blood glucose levels (BGLs) on diabetic rats. After penetrated into the skin, the free Met could be firstly released from MNs. Due to the absorption of interstitial fluid and subsequent release of loaded Met from MIL-100(Fe), leading to a sustainable and long-term drug release behaviors. A notable hypoglycemic effect and low risk of hypoglycemia could be obtained on diabetic rat models in vivo . The as-fabricated hydrogel-forming MNs expected to become a new type of transdermal drug delivery platform for transdermal delivery of high-dose drugs to form a long-term hypoglycemic effect., (© 2024 IOP Publishing Ltd.)

The various kinds of nanocarriers (NCs) have been explored for the delivery of therapeutics designed for the management of skin manifestations. The NCs are considered as one of the promising approaches for the skin delivery of therapeutics attributable to sustained release and enhanced skin penetration. Despite the extensive applications of the NCs, the challenges in their delivery via skin barrier (majorly stratum corneum) have persisted. To overcome all the challenges associated with the delivery of NCs, the microneedle (MN) technology has emerged as a beacon of hope. Programmable drug release, being painless, and its minimally invasive nature make it an intriguing strategy to circumvent the multiple challenges associated with the various drug delivery systems. The integration of positive traits of NCs and MNs boosts therapeutic effectiveness by evading stratum corneum, facilitating the delivery of NCs through the skin and enhancing their targeted delivery. This review discusses the barrier function of skin, the importance of MNs, the types of MNs, and the superiority of NC-loaded MNs. We highlighted the applications of NC-integrated MNs for the management of various skin ailments, combinational drug delivery, active targeting, in vivo imaging, and as theranostics. The clinical trials, patent portfolio, and marketed products of drug/NC-integrated MNs are covered. Finally, regulatory hurdles toward benchtop-to-bedside translation, along with promising prospects needed to scale up NC-integrated MN technology, have been deliberated. The current review is anticipated to deliver thoughtful visions to researchers, clinicians, and formulation scientists for the successful development of the MN-technology-based product by carefully optimizing all the formulation variables.

Introduction: Retinal drug delivery has witnessed significant advancements in recent years, mainly driven by the prevalence of retinal diseases and the need for more efficient and patient-friendly treatment strategies., Areas Covered: Advancements in nanotechnology have introduced novel drug delivery platforms to improve bioavailability and provide controlled/targeted delivery to specific retinal layers. This review highlights various treatment options for retinal diseases. Additionally, diverse strategies aimed at enhancing delivery of small molecules and antibodies to the posterior segment such as implants, polymeric nanoparticles, liposomes, niosomes, microneedles, iontophoresis and mixed micelles were emphasized. A comprehensive overview of the special technologies currently under clinical trials or already in the clinic was provided., Expert Opinion: Ideally, drug delivery system for treating retinal diseases should be less invasive in nature and exhibit sustained release up to several months. Though topical administration in the form of eye drops offers better patient compliance, its clinical utility is limited by nature of the drug. There is a wide range of delivery platforms available, however, it is not easy to modify any single platform to accommodate all types of drugs. Coordinated efforts between ophthalmologists and drug delivery scientists are necessary while developing therapeutic compounds, right from their inception.

The lack of in vivo studies on the delivery of doxorubicin within human skin, especially the absence of data on the doxorubicin diffusion coefficient, has made understanding its transdermal delivery kinetics challenging. In this study, as a first step, governing equations and finite element methods were employed to reproduce Franz diffusion cell experiment in human cadaver skin. The application of this experiment representative model with a fitting method resulted in approximate values for the diffusivity of doxorubicin across various skin layers. The estimated values were used later to conduct a comprehensive examination of doxorubicin administration for breast tumor treatments. In a 2D axisymmetric model using Fick's Law and then a microneedles array 3D model, crucial parameters effects on delivery efficiency were examined, such as the microneedle tip diameter, tip-to-tip distance, and tumor depth. As highlighted by the findings of this study, these parameters have an impact on the effectiveness of doxorubicin delivery for treating breast tumors. The focus of this research is on the potential of numerical methods in biomedical engineering, which addresses the urgent need for data on doxorubicin diffusion in human skin and offers valuable insights into optimizing drug delivery strategies for enhanced therapeutic outcomes., (© 2024 John Wiley & Sons Ltd.)

Diabetic wounds are a common complication of diabetes. The prolonged exposure to high glucose and oxidative stress in the wound environment increases the risk of bacterial infection and abnormal angiogenesis, leading to amputation. Microneedle patches have shown promise in promoting the healing of diabetic wounds through transdermal drug delivery. These patches target the four main aspects of diabetic wound treatment: hypoglycemia, antibacterial action, inflammatory regulation, and tissue regeneration. By overcoming the limitations of traditional administration methods, microneedle patches enable targeted therapy for deteriorated tissues. The design of these patches extends beyond the selection of needle tip material and biomacromolecule encapsulated drugs; it can also incorporate near-infrared rays to facilitate cascade reactions and treat diabetic wounds. In this review, we comprehensively summarize the advantages of microneedle patches compared to traditional treatment methods. We focus on the design and mechanism of these patches based on existing experimental articles in the field and discuss the potential for future research on microneedle patches., Competing Interests: Declaration of competing interest All authors have disclosed any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. There is no use of any human and animal subjects in this work., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, dissolving microneedles (MNs) using polyvinyl alcohol (PVA) and poly (1-vinylpyrrolidone-co-vinyl acetate) (P(VP-co-VA)) as matrix materials were developed for transdermal delivery of rizatriptan benzoate (RB) for acute migraine treatment. In-vitro permeation studies were conducted to assess the feasibility of the as-fabricated dissolving MNs to release RB. Drug skin penetration were tested by Franz diffusion cells, showing an increase of the transdermal flux compared to passive diffusion due to the as-fabricated dissolving MNs having a sufficient mechanical strength to penetrate the skin and form microchannels. The pharmacological study in vivo showed that RB-loaded dissolving MNs significantly alleviated migraine-related response by up-regulating the level of 5-hydroxytryptamine (5-HT) and down-regulating the levels of calcitonin gene-related peptide (CGRP) and substance P (SP). In conclusion, the RB-loaded dissolving MNs have advantages of safety, convenience, and high efficacy over conventional administrations, laying a foundation for the transdermal drug delivery system treatment for acute migraine., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Transdermal delivery is an attractive delivery method that increases bioavailability, is suitable for a wide variety of therapeutics, and offers stable delivery outcomes. However, many therapeutics are unable to readily cross the stratum corneum. Microneedles mechanically disrupt the cutaneous barrier to deliver small molecules, proteins, and vaccines. To date, microneedles have not been used in conjunction with coacervate, a liquid-liquid phase separation that protects unstable proteins. A three-layer microneedle for the controlled release of three different molecules is designed. Through micromolding, microneedles are efficiently generated, which benefits product scalability. The microneedles have good mechanical integrity and effectively penetrate porcine skin ex vivo. The three layers, in the microneedles, release the cargo in a three-phase manner. The released protein maintains its structure well. Moreover, layer thickness can be controlled by varying fabrication parameters. The microneedles can incorporate both small molecule drugs and protein therapeutics, thus promising uses in multi-drug therapies through a single treatment., (© 2023 Wiley‐VCH GmbH.)

Ocular drug delivery is challenging due to the presence of tissue barriers and clearance mechanisms. Most widely used topical formulations need frequent application because of poor permeability, short retention, and low bioavailability. Invasive intraocular injections and implants that deliver drugs at the target site are associated with infections, inflammation, and even vision loss post-use. These gaps can be addressed by a delivery platform that can efficiently deliver drug with minimal tissue damage. Microneedles were introduced as a delivery platform for overcoming dermal barriers with minimal tissue damage. After the successful clinical transition of microneedles in the transdermal drug delivery, they are now being extensively studied for ocular applications. The attributes of minimally invasive application and the capability to deliver a wide range of therapeutics make microneedles an attractive candidate for ocular drug delivery. The current manuscript provides a detailed overview of the recent advancements in the field of microneedles for ocular use. This paper reviews research focusing on polymeric microneedles and their pharmaceutical and biopharmaceutical properties. A brief discussion about their clinical translation and regulatory concerns is also covered. The multitude of research articles supports the fact that microneedles are a potential, minimally invasive drug delivery platform for ophthalmic use., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microneedle (MN)-assisted drug delivery technology has gained increasing attention over the past two decades. Its advantages of self-management and being minimally invasive could allow this technology to be an alternative to hypodermic needles. MNs can penetrate the stratum corneum and deliver active ingredients to the body through the dermal tissue in a controlled and sustained release. Long-acting polymeric MNs can reduce administration frequency to improve patient compliance and therapeutic outcomes, especially in the management of chronic diseases. In addition, long-acting MNs could avoid gastrointestinal reactions and reduce side effects, which has potential value for clinical application. In this paper, advances in design strategies and applications of long-acting polymeric MNs are reviewed. We also discuss the challenges in scale manufacture and regulations of polymeric MN systems. These two aspects will accelerate the effective clinical translation of MN products., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Meng, Qiao, Xin, Ju and He.)

Systemic drug delivery is the current clinically preferred route for cancer therapy. However, challenges associated with tumor localization and off-tumor toxic effects limit the clinical effectiveness of this route. Locoregional drug delivery is an emerging viable alternative to systemic therapies. With the improvement in real-time imaging technologies and tools for direct access to tumor lesions, the clinical applicability of locoregional drug delivery is becoming more prominent. Theoretically, locoregional treatments can bypass challenges faced by systemic drug delivery. Preclinically, locoregional delivery of drugs has demonstrated enhanced therapeutic efficacy with limited off-target effects while still yielding an abscopal effect. Clinically, an array of locoregional strategies is under investigation for the delivery of drugs ranging in target and size. Locoregional tumor treatment strategies can be classified into two main categories: 1) direct drug infusion via injection or implanted port and 2) extended drug elution via injected or implanted depot. The number of studies investigating locoregional drug delivery strategies for cancer treatment is rising exponentially, in both preclinical and clinical settings, with some approaches approved for clinical use. Here, we highlight key preclinical advances and the clinical relevance of such locoregional delivery strategies in the treatment of cancer. Furthermore, we critically analyze 949 clinical trials involving locoregional drug delivery and discuss emerging trends., Competing Interests: Declaration of competing interest SM is an inventor on patent applications related to the topics discussed in the review (owned and managed by Harvard University). SM is a board member and shareholder of Intumo Therapeutics., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microneedles have emerged as a promising platform for transdermal drug delivery with prominent advantages, such as enhanced permeability, mitigated pain, and improved patient adherence. While microneedles have primarily been employed for delivering small molecules, nucleic acids, peptides, and proteins, recent researches have demonstrated their prospect in combination with cell therapy. Cell therapy involving administration or transplantation of living cells (e.g. T cells, stem cells, and pancreatic cells) has gained significant attention in preclinical and clinical applications for various disease treatments. However, the effectiveness of systemic cell delivery may be restricted in localized conditions like solid tumors and skin disorders due to limited penetration and accumulation into the lesions. In this perspective, an overview of recent advances in microneedle-assisted cell delivery for immunotherapy, tissue regeneration, and hormone modulation, with respect to their mechanical property, cell loading capacity, as well as viability and bioactivity of the loaded cells is provided. Potential challenges and future perspectives with microneedle-mediated cell therapy are also discussed., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

In the last 20 years, protein, peptide and nucleic acid-based therapies have become the fastest growing sector in the pharmaceutical industry and play a vital role in disease therapy. However, the intrinsic sensitivity and large molecular sizes of biotherapeutics limit the available routes of administration. Currently, the main administration routes of biomacromolecules, such as parenteral, oral, pulmonary, nasal, rectal and buccal routes, each have their limitations. Several non-invasive strategies have been proposed to overcome these challenges. Researchers were particularly interested in microneedles (MNs) and polymeric films because of their less invasiveness, convenience and greater potential to preserve the bioactivity of biotherapeutics. By facilitating with MNs and polymeric films, biomacromolecules could provide significant benefits to patients suffering from various diseases such as cancer, diabetes, infectious and ocular diseases. However, before these devices can be used on patients, how to upscale MN manufacture in a cost-effective and timely manner, as well as the long-term safety of MN and polymeric film applications necessitates further investigation., (© 2023. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Alongside oral delivery of therapeutics, transdermal delivery systems have gained increased patient acceptability over past few decades. With increasing popularity, novel techniques were employed for transdermal drug targeting which involves microneedle patches, transdermal films and hydrogel based formulations. Hydrogel forming ability along with other rheological behaviour makes natural polysaccharides an attractive option for transdermal use. Being a marine originated anionic polysaccharide, alginates are widely used in pharmaceutical, cosmetics and food industries. Alginate possesses excellent biodegradability, biocompatibility and mucoadhesive properties. Owing to many favourable properties required for transdermal drug delivery systems (TDDS), the application of alginates are increasing in recent times. This review summarizes the source and properties of alginate along with several transdermal delivery techniques including the application of alginate for respective transdermal systems.

Subcutaneous (SC) injection is a common administration route for rapid and efficient delivery of biotherapeutics. However, syringe-based injections usually require professional assistance and are associated with pain and potential risks of infections, thus leading to undesired patient compliance and poor life quality. Herein, this work presents an ultrarapid-acting microneedle (URA-MN) patch for immediate transdermal delivery of therapeutics in a minimally invasive manner. Effervescent agents are incorporated into the tip of URA-MN for rapid generation of CO 2 bubbles upon insertion into the skin, immediately powering the biotherapeutics release within a few minutes. The release kinetics of diverse agents including liraglutide (LRT), insulin, and heparin from the URA-MN patches are evaluated in three different mouse models, and the rapid release of biotherapeutics and potent therapeutic effects are achieved with only 5 min administration. Noteworthily, attributed to the short application duration and negligible residuals of MN matrix remaining in the skin, the URA-MN patch shows desirable biocompatibility after six-week administration., (© 2023 Wiley-VCH GmbH.)

The minimally-invasive and painless nature of microneedle (MN) application has enabled the technology to obviate many issues with injectable drug delivery. MNs not only administer therapeutics directly into the dermal and ocular space, but they can also control the release profile of the active compound over a desired period. To enable prolonged delivery of payloads, various MN types have been proposed and evaluated, including dissolving MNs, polymeric MNs loaded or coated with nanoparticles, fast-separable MNs hollow MNs, and hydrogel MNs. These intricate yet intelligent delivery platforms provide an attractive approach to decrease side effects and administration frequency, thus offer the potential to increase patient compliance. In this review, MN formulations that are loaded with various therapeutics for long-acting delivery to address the clinical needs of a myriad of diseases are discussed. We also highlight the design aspects, such as polymer selection and MN geometry, in addition to computational and mathematical modeling of MNs that are necessary to help streamline and develop MNs with high translational value and clinical impact. Finally, up-scale manufacturing and regulatory hurdles along with potential avenues that require further research to bring MN technology to the market are carefully considered. It is hoped that this review will provide insight to formulators and clinicians that the judicious selection of materials in tandem with refined design may offer an elegant approach to achieve sustained delivery of payloads through the simple and painless application of a MN patch., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Microneedles (MNs) have become versatile platforms for minimally invasive transdermal drug delivery devices. However, there are concerns about MN-induced skin infections with long-term transdermal administration. Using the Langmuir-Blodgett (LB) technique, a simple method for depositing antibacterial nanoparticles of various shapes, sizes, and compositions onto MNs is developed. This strategy has merits over conventional dip coating techniques, including controlled coating layers, uniform and high coverage, and a straightforward fabrication process. This provides MNs with a fast-acting and long-lasting antibacterial effect. This study demonstrates that antibacterial MNs achieve superior bacterial elimination in vitro and in vivo without sacrificing payload capacity, drug release, or mechanical strength. It is believed that such a functional nanoparticle coating technique offers a platform for the expansion of MNs function, especially in long-term transdermal drug delivery fields., (© 2023 Wiley-VCH GmbH.)

Bone-related disorders treatment is a serious public health concern, imposing a significant social and economic burden on patients and healthcare systems. Although conventional drug delivery systems have made advances in bone diseases prevention and management, the limited delivery efficiency and convoluted focal environment lead to inadequate drug absorption and lack of specificity to achieve the intended therapeutic impact. Microneedle-based therapy represents an extraordinarily safe and well-tolerable therapeutic approach for treating bone disorders, providing improved efficacy by breaking down the barriers and delivery of therapeutic components to the target sites with programable release profiles in a less invasive manner. Over the past decades, numerous significant achievements in the development of various types of drug-carried microneedles have been made to address the obstacles encountered in the bone-treating procedure, enabling the microneedle-based therapy to take an important step in practical applications. In this light, this review summarizes these remarkable researches in terms of microneedles types and drug delivery strategies, with the goal of demonstrating the benefits of exploiting microneedle-based therapy as a novel strategy for treating bone-related disorders. The remaining challenges and future perspectives are also discussed in the hope of inspiring more efficient and intelligent bone treatment strategies., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Masson SAS.)

The mucosa-interfacing systems based on bioinspired engineering design for sampling/drug delivery have manifested crucial potential for the monitoring of infectious diseases and the treatment of mucosa-related diseases. However, their efficiency and validity are severely restricted by limited contact area for molecular transfer and dissatisfactory capture/detachment capability. Herein, inspired by the multilayer villus structure of the small intestine that enables high nutrient absorption, a trigonometric function-based periodic pattern was fabricated and integrated on the base layer of the microneedle patch, exhibiting a desirable synergistic effect with needle tips for deep sample enrichment and promising molecular transfer, significantly improving the device-mucosa bidirectional interaction. Moreover, mathematical modeling and finite element analysis were adopted to visualize and quantify the microcosmic molecular transmission process, guiding parameter optimization in actual situation. Encouragingly, these intestinal villi-inspired mathematically base-layer engineered microneedles (IMBEMs) have demonstrated distinguished applicability among mucosa tissue with varying surface curvatures, tissue toughness, and local environments, and simultaneously, have gained favorable support from healthy volunteers receiving preliminary test of IMBEMs patches. Overall, validated by numerous in vitro and in vivo tests, the IMBEMs were confirmed to act as a promising candidate to facilitate mucosa-based sampling and topical drug delivery, indicating highly clinical translation potential.

Objectives: Hydrogel microneedles are emerging, and promising microneedles mainly composed of swelling polymers. This review is intended to summarize the preparation materials, formation mechanisms, applications and existing problems of hydrogel microneedles., Methods: We collected the literature on the materials, preparation and application of hydrogel microneedles in recent years, and summarized their mechanism and application in drugs delivery., Key Findings: Hydrogel microneedles have higher safety and capabilities of controlled drug release, and have been mainly used in tumour and diabetes treatment, as well as clinical monitoring. In recent years, hydrogel microneedles have shown great potential in drug delivery, and have played the role of whitening, anti-inflammatory and promoting healing., Conclusions: As an emerging drug delivery idea, hydrogel microneedles for drug delivery has gradually become a research hotspot. This review will provide a systematic vision for the favourable development of hydrogel microneedles and their promising application in medicine, especially drug delivery., (© The Author(s) 2023. Published by Oxford University Press on behalf of the Royal Pharmaceutical Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Oral administration and intramuscular (IM) injection are commonly recommended options for human immunodeficiency virus (HIV) treatment. However, poor patient compliance due to daily oral dosing, pain at injection sites and the demand for trained healthcare staff for injections limit the success of these administration routes, especially in low-resource settings. To overcome these limitations, for the first time, we propose novel bilayer dissolving microneedles (MNs) for the intradermal delivery of long-acting nanosuspensions of the antiretroviral (ARV) drug bictegravir (BIC) for potential HIV treatment and prevention. The BIC nanosuspensions were prepared using a wet media milling technique on a laboratory scale with a particle size of 358.99 ± 18.53 nm. The drug loading of nanosuspension-loaded MNs and BIC powder-loaded MNs were 1.87 mg/0.5 cm 2 and 2.16 mg/0.5 cm 2 , respectively. Both dissolving MNs exhibited favorable mechanical and insertion ability in the human skin simulant Parafilm® M and excised neonatal porcine skin. Importantly, the pharmacokinetic profiles of Sprague Dawley rats demonstrated that dissolving MNs were able to intradermally deliver 31% of drug loading from nanosuspension-loaded MNs in the form of drug depots. After a single application, both coarse BIC and BIC nanosuspensions achieved sustained release, maintaining plasma concentrations above human therapeutic levels (162 ng/mL) in rats for 4 weeks. These minimally invasive and potentially self-administered MNs could improve patient compliance, providing a promising platform for the delivery of nanoformulated ARVs and resulting in prolonged drug release, particularly for patients in low-resource settings., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Delivery of cancer cell membranes (CM) is a new approach for the activation of the immune system and the induction of immunotherapy of cancer. Local delivery of melanoma CM into skin can induce efficient immune stimulation of antigen presenting cells (APCs), such as dendritic cells. In the current study, fast dissolving microneedles (MNs) were developed for the delivery of melanoma B16F10 CM. Two polymers were tested for the fabrication of MNs: poly(methyl vinyl ether-co-maleic acid) (PMVE-MA) and hyaluronic acid (HA). The incorporation of CM in MNs was achieved through coating of the MNs using a multi-step layering procedure or the micromolding technique. The CM loading and its stabilization were improved by adding sugars (sucrose and trehalose) and a surfactant (Poloxamer 188), respectively. In an ex vivo experiment, both PMVE-MA and HA showed fast dissolutions (<30 s) after insertion into porcine skin. However, HA-MN showed better mechanical properties, namely improved resistance to fracture when submitted to a compression force. Overall, a B16F10 melanoma CM-dissolving MN system was efficiently developed as a promising device suggesting further studies in immunotherapy and melanoma applications., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Microneedles (MNs) are needles with a tip diameter ranging from 10 to 100 um and a length ranging up to 1 mm. The first patent for drug delivery device for percutaneous administration filed by Alza corporation dates back to 1976 (Gerstel and Place, 1976), and in between 1989 and 2021 the filed patents for MNs are >4500 [1]. These devices can potential overcome some drawbacks of traditional needles, such as the pain generated during insertion, requirement for trained personnel to manipulate syringes, and difficulty of performing injections in elderly and obese patients. MNs and MN arrays are emerging as a convenient method to deliver compounds and extract blood without causing any pain. A promising application is the use of MNs as alternative solution to topical creams (TC) and transdermal patches (TP) for transdermal drug delivery. The external layer of human skin, the epidermis, offers a major barrier to transdermal drug delivery, thanks to the stratum corneum (SC). Exposed to the external environment, SC ultimately protects the human body from UV light radiation, heat, water loss, bacteria, fungi and viruses, and it is the barrier that controls diffusion rate for almost all compounds. TC and TP applications are limited by the skin permeability to lipophilic compounds and small molecules, and by the slow delivery rate of some compounds. MNs have been around for >35 year now, and it is a general opinion that MNs increase delivery compared to passive diffusion, thanks to the feature of penetrating the SC and reaching the dermis. This review recollects the existing studies that compare MN delivery of drugs with passive diffusion of the same drugs in alive organisms, giving an overview of what are the type of MNs, the chemical delivered and the methods employed to quantify drug delivery into skin and/or in the bloodstream. The final aim is to quantify the enhancement factor of MNs with respect to passive diffusion, and establish a possible standard on how tests can be performed in order to compare different data., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Intra- and transdermal administration of substances via percutaneous injection is effective but considered painful, and inconvenient in addition to bringing forth biohazardous waste material. In contrast to injection, topical drug application, which includes ointments, creams and lotions, increases the local drug load. Moreover, it has reduced side effects compared to systemic administration. However, the epidermis poses a barrier to high molecular weight substances, limiting the delivery efficiency. Dissolving microneedles (DMN) are hydrophilic, mostly polymer-based constructs that are capable of skin penetration and were developed to provide painless and direct dermal drug delivery. This systematic review provides a comprehensive overview of the available clinical evidence for the use of DMN to treat various skin conditions. According to the PRISMA statement, a systematic search for articles on the use of DMN for dermatological indications was conducted on three different databases (Pubmed, Embase, and the Cochrane library). Only human clinical trials were considered. Qualitative assessment was done by two separate reviewers using the Cochrane risk of bias (RoB 2) and Chambers' criteria assessment tools. The search yielded 1090 articles. After deduplication and removal of ineligible records, 889 records were screened on title and abstract. Full text screening was done for 18 articles and ultimately 17 articles were included of which 15 were randomized controlled trials and two were case series. The quality assessment showed that the majority of included studies had low to no risk of bias. Clinical data supports that DMN are an excellent, effective, and pain free drug delivery method for multiple dermatological disorders including skin aging, hyperpigmentation, psoriasis, warts, and keloids by supplying a painless and effective vehicle for intradermal/intralesional drug administration. Microneedle technology provides a promising non- to minimally-invasive alternative to percutaneous injection., (© 2023 Japanese Dermatological Association.)

Micromotors have led to an unprecedented revolution in the field of cargo delivery. Attempts in this area trend toward enriching their structures and improving their functions to promote their further applications. Herein, novel microneedle-motors (MNMs) for active drug delivery through a flexible multimodal microfluidic lithographic approach are presented. The multimodal microfluidics is composed of a co-flow geometry-derived droplet fluid and an active cargo mixed laminar flow in a triangular microchannel. The MNMs with sharp tips and spherical fuel-loading cavities are obtained continuously from microfluidics with the assistance of flow lithography. The structural parameters of the MNMs could be precisely tailored by simply choosing the flow speed or the shape of the photomask. As the actives are mixed into the phase solution during the generation, the resultant MNMs are loaded with cargoes for direct applications without any extra complex operation. Based on these features, it is demonstrated that with sharp tips and autonomous movement, the MNMs can efficiently penetrate the tissue-like substrates, indicating the potential in overcoming physiological barriers for cargo release. These results indicate that the proposed multimodal microfluidic lithographic MNMs are valuable for practical active cargo delivery in biomedical and other relative areas., (© 2022 Wiley-VCH GmbH.)

Microneedles (MN) technology is an emerging technology for the transdermal delivery of therapeutics. When combined with photoresponsive (PR) materials, MNs can deliver therapeutics precisely and effectively with enhanced efficacy or synergistic effects. This review systematically summarizes the therapeutic applications of PRMNs in cancer therapy, wound healing, diabetes treatment, and diagnostics. Different PR approaches to activate and control the release of therapeutic agents from MNs are also discussed. Overall, PRMNs are a powerful tool for stimuli-responsive controlled-release therapeutic delivery to treat various diseases., Competing Interests: Declaration of Competing Interest TDN has conflict of interest with PiezoBioMembrane Inc. and SingleTimeMicroneedles Inc., (Copyright © 2022. Published by Elsevier B.V.)

Owing to their biological diversity, high potency, good tolerability, low immunogenicity, site-specific activity, and great efficacy, macromolecular drugs (i.e., proteins and peptides, antibodies, hormones, nucleic acids, vaccines, etc.) are extensively used as diagnostics, prophylactics, and therapeutics in various diseases. To overcome drawbacks associated with parenteral (invasive) delivery of macromolecules as well as to preserve their therapeutic integrity, oromucosal route (sublingual and buccal) has been proven efficient alternate port of delivery. This review aims to summarize challenges associated with oromucosal route and overtime developments in conventional delivery systems with special emphasis on most recent delivery strategies. Over the past few decades, significant efforts have been made for improving the oromucosal absorption of macromolecules by employing chemical penetration enhancers (CPE), enzyme inhibitors, chemical modification of drug structure (i.e., lipidation, PEGylation, etc.), and mucoadhesive materials in the form of buccal tablets, films (or patches), sprays, fast disintegrating tablets, and microneedles. Adaptation of adjunct strategies (e.g., iontophoresis in conjunction with CPE) has shown significant improvement in oromucosal absorption of macromolecules; however, these approaches were also associated with many drawbacks. To overcome these shortcomings and to further improve therapeutic outcomes, specialized delivery devices called "hybrid nanosystems" have been designed in recent times. This newer intervention showed promising potential for promoting oromucosal absorption and absolute bioavailability of macromolecules along with improved thermostability (cold chain free storage), enabling self-administration, site-specific activity, improving therapeutic efficacy and patient compliance. We anticipate that tailoring of hybrid nanosystems to clinical trials as well as establishing their short- and long-term safety profile would substantiate their therapeutic value as pharmaceutical devices for oromucosal delivery of macromolecules., Competing Interests: Declaration of Competing Interest Authors reported no conflict of interest in the present work., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Purpose: To demonstrate the feasibility of vacuum compression molding as a novel technique for fabricating polymeric poly (D, L-lactic-co-glycolic acid) microneedles., Methods: First, polydimethylsiloxane molds were prepared using metal microneedle templates and fixed in the MeltPrep® Vacuum Compression Molding tool. Poly (D, L-lactic-co-glycolic acid) (EXPANSORB® DLG 50-5A) was added, enclosed, and heated at 130°C for 15 min under a vacuum of -15 psi, cooled with compressed air for 15 min, followed by freezing at -20°C for 30 min, and stored in a desiccator. The microneedles and microchannels were characterized by a variety of imaging techniques. In vitro permeation of model drug lidocaine as base and hydrochloride salt was demonstrated across intact and microporated dermatomed human skin., Results: Fabricated PLGA microneedles were pyramid-shaped, sharp, uniform, and mechanically robust. Scanning electron microscopy, skin integrity, dye-binding, histology, and confocal laser microscopy studies confirmed the microchannel formation. The receptor delivery of lidocaine salt increased significantly in microporated (270.57 ± 3.73 μg/cm 2 ) skin as compared to intact skin (142.19 ± 13.70 μg/cm 2 ) at 24 h. The receptor delivery of lidocaine base from microporated skin was significantly higher (312.37 ± 10.57 μg/cm 2 ) than intact skin (169.68 ± 24.09 μg/cm 2 ) up to 8 h. Lag time decreased significantly for the base (2.24 ± 0.17 h to 0.64 ± 0.05 h) and salt (4.76 ± 0.31 h to 1.47 ± 0.21 h) after microporation., Conclusion: Vacuum compression molding was demonstrated as a novel technique to fabricate uniform, solvent-free, strong polymer microneedles in a short time., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Gene therapy is a critical constituent of treatment approaches for genetic diseases and has gained tremendous attention. Treating and preventing diseases at the genetic level using genetic materials such as DNA or RNAs could be a new avenue in medicine. However, delivering genes is always a challenge as these molecules are sensitive to various enzymes inside the body, often produce systemic toxicity, and suffer from off-targeting problems. In this regard, transdermal delivery has emerged as an appealing approach to enable a high efficiency and low toxicity of genetic medicines. This review systematically summarizes outstanding transdermal gene delivery methods for applications in skin cancer treatment, vaccination, wound healing, and other therapies., (© 2022. Controlled Release Society.)

As microneedle-based vaccines possess advantages of high compliance, moderate invasiveness and convenience that are highly relevant to their unique design, they are becoming an indispensable piece of the puzzle in the field of medical applications. By selecting appropriate materials and methods convenient for precise control over the structure and morphology, MN-based vaccines with strong mechanical properties and variable forms can be fabricated, and specific biomolecules can be used for monitoring or augmenting human immunity. The structural design strategies of MN-based vaccines are highlighted in this review, following a brief discussion of the mechanism of skin immunity and the classification and fabrication approaches of MNs. The biomedical applications of MN-based vaccines, including sampling from interstitial fluid and therapy in infectious diseases and cancers, have also been demonstrated. Finally, the central challenges in this field and opportunities for future developments are also deliberated., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflicts of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

This article presents microneedles analyses where the design parameters studied included length and inner and outer diameter ranges. A mathematical model was also used to generalize outer and inner diameter ratios in the obtained ranges. Following this, the range of inner and outer diameters was completed by mechanical simulations, ranging from 30 μm to 134 μm as the inner diameter range and 208 μm to 250 μm as the outer diameter range. With these ranges, a mathematical model was made using fourth-order polynomial regressions with a correlation of 0.9993, ensuring a safety factor of four in which von Misses forces of the microneedle are around 17.931 MPa; the ANSYS software was used to analyze the mechanical behavior of the microneedles. In addition, the microneedle concept was made by 3D printing using a bio-compatible resin of class 1. The features presented by the microneedle designed in this study make it a promising option for implementation in a transdermal drug-delivery device.