Search

As a natural polysaccharide polymer, glycogen possesses suitable properties for use as a nanoparticle carrier in cancer theranostics. Not only it is inherently biocompatible, it can also be easily chemically modified with various moieties. Synthetic glycogen conjugates can passively accumulate in tumours due to enhanced permeability of tumour vessels and limited lymphatic drainage (the EPR effect). For this study, we developed and examined a glycogen-based carrier containing a gadolinium chelate and near-infrared fluorescent dye. Our aim was to monitor biodistribution and accumulation in tumour-bearing rats using magnetic resonance and fluorescence imaging. Our data clearly show that these conjugates possess suitable imaging and tumour-targeting properties, and are safe under both in vitro and in vivo conditions. Additional modification of glycogen polymers with poly(2-alkyl-2-oxazolines) led to a reduction in the elimination rate and lower uptake in internal organs (lower whole-body background: 45% and 27% lower MRI signals of oxazoline-based conjugates in the liver and kidneys, respectively compared to the unmodified version). Our results highlight the potential of multimodal glycogen-based nanopolymers as a carrier for drug delivery systems in tumour diagnosis and treatment.

We have developed a biodegradable, biocompatible system for the delivery of the antituberculotic antibiotic rifampicin with a built-in drug release and nanoparticle degradation fluorescence sensor. Polymer nanoparticles based on poly(ethylene oxide) monomethyl ether-block-poly(ε-caprolactone) were noncovalently loaded with rifampicin, a combination that, to best of our knowledge, was not previously described in the literature, which showed significant benefits. The nanoparticles contain a Förster resonance energy transfer (FRET) system that allows real-time assessment of drug release not only in vitro, but also in living macrophages where the mycobacteria typically reside as hard-to-kill intracellular parasites. The fluorophore also enables in situ monitoring of the enzymatic nanoparticle degradation in the macrophages. We show that the nanoparticles are efficiently taken up by macrophages, where they are very quickly associated with the lysosomal compartment. After drug release, the nanoparticles in the cmacrophages are enzymatically degraded, with half-life 88±11 min., (Copyright © 2016 Elsevier Inc. All rights reserved.)

A new drug-delivery system of polymer nanoparticles (NPs) bearing pinacol-type boronic ester and alkyne moieties displaying triggered self-immolative polymer degradation in the presence of reactive oxygen species (ROS) with the capability of cellular imaging is presented. The NPs specifically release their drug cargo under concentrations of ROS that are commonly found in the intracellular environment of certain tumors and of inflamed tissues and exhibit significant cytotoxicity to cancer cells compared to their non-ROS-responsive counterparts.

Drug delivery systems based on thermoresponsive polymers might serve as suitable carriers for local radiotherapy. We have, therefore, designed and synthesized a radioiodine-labellable thermoresponsive polymer. The polymer was synthesized by copolymerization of N-isopropylacrylamide with N-methacryloyl tyrosinamide in tetrahydrofuran, and then labelled by (131)I. The solution of this labelled polymer in dimethylsulfoxide (4.4 MBq/ml; 1.8 wt% polymer) was applied to femoral muscle of male Balb/C mice (50 microl per animal). The biodistribution and excretion of radioactivity was followed in 2h and 1, 7, 14, 28 and 42 d post injection (n=6 per time point). As expected, the labelled polymer was left on the application site (ca 90% 2h post injection), decreasing slowly to ca 80% within 14 d. At 28 d post injection, ca 70% of the injected activity was still found on the application site, decreasing to ca 60% at 42 d. No organ-specific accumulation of the radioactivity released from the application site, including thyroid, was observed. Majority of the released radioactivity was excreted via urine and faeces. This preliminary study suggests that thermoresponsive polymers could be used as an effective delivery system for localized radiotherapy., (Copyright 2010 Elsevier Ltd. All rights reserved.)

A novel polymeric micellar pH-sensitive system for delivery of doxorubicin (DOX) is described. Polymeric micelles were prepared by self-assembly of amphiphilic diblock copolymers in aqueous solutions. The copolymers consist of a biocompatible hydrophilic poly(ethylene oxide) (PEO) block and a hydrophobic block containing covalently bound anthracycline antibiotic DOX. The starting block copolymers poly(ethylene oxide)-block-poly(allyl glycidyl ether) (PEO-PAGE) with a very narrow molecular weight distribution (Mw/Mn ca. 1.05) were prepared by anionic ring opening polymerization using sodium salt of poly(ethylene oxide) monomethyl ether as macroinitiator and allyl glycidyl ether as functional monomer. The copolymers were covalently modified via reactive double bonds by the addition of methyl sulfanylacetate. The resulting ester subsequently reacted with hydrazine hydrate yielding polymer hydrazide. The hydrazide was coupled with DOX yielding pH-sensitive hydrazone bonds between the drug and carrier. The resulting conjugate containing ca. 3 wt.% DOX forms micelles with Rh(a)=104 nm in phosphate-buffered saline. After incubation in buffers at 37 degrees C DOX was released faster at pH 5.0 (close to pH in endosomes; 43% DOX released within 24 h) than at pH 7.4 (pH of blood plasma; 16% DOX released within 24 h). Cleavage of hydrazone bonds between DOX and carrier continues even after plateau in the DOX release from micelles incubated in aqueous solutions is reached.

Poly(lactic-co-glycolic acid) (PLGA) nanoparticle-based drug delivery systems are known to offer a plethora of potential therapeutic benefits. However, challenges related to large-scale manufacturing, such as the difficulty of reproducing complex formulations and high manufacturing costs, hinder their clinical and commercial development. In this context, a reliable manufacturing technique suitable for the scale-up production of nanoformulations without altering efficacy and safety profiles is highly needed. In this paper, we develop an inline sonication process and adapt it to the industrial scale production of immunomodulating PLGA nanovaccines developed using a batch sonication method at the laboratory scale. The investigated formulations contain three distinct synthetic peptides derived from the carcinogenic antigen New York Esophageal Squamous Cell Carcinoma-1 (NY-ESO-1) together with an invariant natural killer T-cell (iNKT) activator, threitolceramide-6 (IMM60). Process parameters were optimized to obtain polymeric nanovaccine formulations with a mean diameter of 150 ± 50 nm and a polydispersity index <0.2. Formulation characteristics, including encapsulation efficiencies, release profiles and in vitro functional and toxicological profiles, are assessed and statistically compared for each formulation. Overall, scale-up formulations obtained by inline sonication method could replicate the colloidal and functional properties of the nanovaccines developed using batch sonication at the laboratory scale. Both types of formulations induced specific T-cell and iNKT cell responses in vitro without any toxicity, highlighting the suitability of the inline sonication method for the continuous scale-up of nanomedicine formulations in terms of efficacy and safety. [ABSTRACT FROM AUTHOR]

Polymers are omnipresent materials that are widely used in medicine, e.g., as construction materials for medical devices or as polymer nanoparticle drug delivery systems. Therefore, their possible effects on biomolecules, such as lipids, proteins, and other molecules, present in the human body must be examined. This review addresses the effects of polymer materials (such as dendrimers, polysaccharides) on the process of amyloid fibril formation. Amyloidoses are very serious diseases that are characterized by amyloid deposition in various organs and tissues, causing their dysfunction. The treatment of amyloidoses, such as Alzheimer's disease (AD), using polymer materials is a challenge. Studies aiming to elucidate the effects of polymers on the process of amyloid fibril formation are therefore also of key importance for understanding the process of amyloid fibril formation and amyloidoses in general. [ABSTRACT FROM AUTHOR]

We have developed a biodegradable, biocompatible system for the delivery of the antituberculotic antibiotic rifampicin with a built-in drug release and nanoparticle degradation fluorescence sensor. Polymer nanoparticles based on poly(ethylene oxide) monomethyl ether- block -poly(ε-caprolactone) were noncovalently loaded with rifampicin, a combination that, to best of our knowledge, was not previously described in the literature, which showed significant benefits. The nanoparticles contain a Förster resonance energy transfer (FRET) system that allows real-time assessment of drug release not only in vitro , but also in living macrophages where the mycobacteria typically reside as hard-to-kill intracellular parasites. The fluorophore also enables in situ monitoring of the enzymatic nanoparticle degradation in the macrophages. We show that the nanoparticles are efficiently taken up by macrophages, where they are very quickly associated with the lysosomal compartment. After drug release, the nanoparticles in the cmacrophages are enzymatically degraded, with half-life 88 ± 11 min. [ABSTRACT FROM AUTHOR]

A feature article is presented on recent developments in the investigation of stimuli responsive polymers and their biomedical applications. Polymer systems are grouped with respect to sensitivity to changes in temperature, pH, light, redox potential and other special changes in environment. Underlying principles and possible applications of various systems are discussed. Critical evaluation of all benefits but also drawbacks of a particular stimuli responsivity is therefore necessary when planning the construction of multi-stimuli responsive systems. Special focus is devoted to biological consequences of physico-chemical properties of the polymer materials. [ABSTRACT FROM AUTHOR]

Abstract: Acridines are potent DNA-intercalating anticancer agents with high in vivo anticancer effectiveness, but also severe side effects. We synthesized five 9-anilinoacridine-type drugs and their conjugates with biocompatible water-soluble hydrazide polymer carrier. All of the synthesized acridine drugs retained their in vitro antiproliferative properties. Their polymer conjugates were sufficiently stable at pH 7.4 (model of pH in blood plasma) while releasing free drugs at pH 5.0 (model of pH in endosomes). After internalization of the conjugates, the free drugs were released and are visible in cell nuclei by fluorescence microscopy. Their intercalation ability was proven using a competitive ethidium bromide displacement assay. [Copyright &y& Elsevier]

Here, we report on the construction of biodegradable poly(ethylene oxide monomethyl ether) (MPEO)-b-poly(ε-caprolactone) (PCL) nanoparticles (NPs) having acid-labile (acyclic ketal group) linkage at the block junction. In the presence of acidic pH, the nanoassemblies were destabilized as a consequence of cleaving this linkage. The amphiphilic MPEO-b-PCL diblock copolymer self-assembled in PBS solution into regular spherical NPs. The structure of self-assemble and disassemble NPs were characterized in detail by dynamic (DLS), static (SLS) light scattering, small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). The key of the obtained NPs is using them in a paclitaxel (PTX) delivery system and study their in vitro cytostatic activity in a cancer cell model. The acid-labile ketal linker enabled the disassembly of the NPs in a buffer simulating an acidic environment in endosomal (pH ~5.0 to ~6.0) and lysosomal (pH ~4.0 to ~5.0) cell compartments resulting in the release of paclitaxel (PTX) and formation of neutral degradation products. The in vitro cytotoxicity studies showed that the activity of the drug-loaded NPs was increased compared to the free PTX. The ability of the NPs to release the drug at the endosomal pH with concomitant high cytotoxicity makes them suitable candidates as a drug delivery system for cancer therapy. [ABSTRACT FROM AUTHOR]

Hydrazone conjugates of polymers with doxorubicin represent a very promising tool for cancer chemotherapy. However, these conjugates are very difficult to radiolabel with iodine radionuclides, which possess otherwise very advantageous nuclear properties to, e.g ., follow biodistribution. In this study, we developed a robust protocol for the high-yield radioiodination of hydrazone-type drug delivery systems with doxorubicin. In particular, it is crucial that the polymer radioiodination step be performed before the deprotection of the hydrazide and doxorubicin binding. [ABSTRACT FROM AUTHOR]