Search

Nanomedicine, an area that uses nanomaterials for theragnostic purposes, is advancing rapidly, particularly in the detection and treatment of neurodegenerative diseases. The design of nanocarriers can be optimized to enhance drug bioavailability and targeting to specific organs, improving therapeutic outcomes. However, clinical translation hinges on biocompatibility and safety. Nanocarriers can cross the blood-brain barrier (BBB), potentially causing neurotoxic effects through mechanisms such as oxidative stress, DNA damage, and neuroinflammation. Concerns about their accumulation and persistence in the brain make it imperative to carry out a nanotoxicological risk assessment. Generally, this involves identifying exposure sources and routes, characterizing physicochemical properties, and conducting cytotoxicity assays both in vitro and in vivo. The lack of a specialized regulatory framework creates substantial gaps, making it challenging to translate findings across development stages. Additionally, there is a pressing need for innovative testing methods due to constraints on animal use and the demand for high-throughput screening. This review examines the mechanisms of nanocarrier-induced neurotoxicity and the challenges in risk assessment, highlighting the impact of physicochemical properties and the advantages and limitations of current neurotoxicity evaluation models. Future perspectives are also discussed. Additional guidance is crucial to improve the safety of nanomaterials and reduce associated uncertainty. STATEMENT OF SIGNIFICANCE: Nanocarriers show tremendous potential for theragnostic purposes in neurological diseases, enhancing drug targeting to the brain, and improving biodistribution and pharmacokinetics. However, their neurotoxicity is still a major field to be explored, with only 5% of nanotechnology-related publications addressing this matter. This review focuses on the issue of neurotoxicity and safety assessment of nanocarriers for brain delivery. Neurotoxicity-relevant exposure sources, routes, and molecular mechanisms, along with the impact of the physicochemical properties of nanomaterials, are comprehensively described. Moreover, the different experimental models used for neurotoxicity evaluation are explored at length, including their main advantages and limitations. To conclude, we discuss current challenges and future perspectives for a better understanding of risk assessment of nanocarriers for neurobiomedical applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Current treatments for Alzheimer's disease (AD) attenuate the progression of symptoms and aim to improve the patient's quality of life. Licensed medicines are mostly for oral administration and are limited by the difficulty in crossing the blood-brain barrier (BBB). Here in, the nasal route has been explored as an alternative pathway that allows drugs to be directly delivered to the brain via the nasal cavity. However, clearance mechanisms in the nasal cavity impair the delivery of drugs to the brain and limit their bioavailability. To optimize nose-to-brain delivery, formulations of lipid-based nanosystems, namely nanoemulsions and nanostructured lipid carriers (NLC), formulated in situ gelling hydrogels have been proposed as approaches for nose-to-brain delivery. These formulations possess characteristics that facilitate drug transport directly to the brain, minimizing side effects and maximizing therapeutic benefits. It has been recommended that the manufacture of these drug delivery systems follows the quality by design (QbD) approach based on nasal administration requirements. This review provides an insight into the current knowledge of the AD, highlighting the need for an effective drug delivery to the brain. Considering the mounting interest in the use of nanoemulsions and NLC for nose-to-brain delivery, a description of drug transport pathways in the nasal cavity and the application of these nanosystems and their in situ hydrogels through the intranasal route are presented. Relevant preclinical studies are summarised, and the future prospects for the use of lipid-based nanosystems in the treatment of AD are emphasized., Competing Interests: The authors report no conflicts of interest in this work., (© 2021 Cunha et al.)

Cutaneous use of lipid nanoparticles (solid lipid nanoparticles, SLN and nanostructured lipid carriers, NLC) has been showing promising results. These systems consist of low viscosity aqueous dispersions, being usually employed by means of semi-solid formulations with adequate consistency for skin application. This review addresses the cutaneous use of lipid nanoparticles for therapeutic and cosmetic applications. Initially, general information related to pharmaceutical semi-solid formulations is presented. Afterwards, the effects of SLN and NLC on the skin, and technological aspects related to semi-solid systems based on SLN or NLC are described. Finally, the most relevant studies related to the formulations based on SLN and NLC, for cosmetic and therapeutic applications, are reported. Notwithstanding the cutaneous use of SLN and NLC has been proposed for both local and transdermal delivery, the reported studies show promising results only for local application. In this sense, more research is required to better understanding the interaction mechanisms of lipid nanoparticles with skin lipids. Furthermore, the development of standard methods for skin experiments with nanoparticles is necessary., (Copyright © 2017. Published by Elsevier B.V.)

The present paper focuses on the development and characterization of silica nanoparticles (SiNP) coated with hydrophilic polymers as mucoadhesive carriers for oral administration of insulin. SiNP were prepared by sol-gel technology under mild conditions and coated with different hydrophilic polymers, namely, chitosan, sodium alginate or poly(ethylene glycol) (PEG) with low and high molecular weight (PEG 6000 and PEG 20000) to increase the residence time at intestinal mucosa. The mean size and size distribution, association efficiency, insulin structure and insulin thermal denaturation have been determined. The mean nanoparticle diameter ranged from 289 nm to 625 nm with a PI between 0.251 and 0.580. The insulin association efficiency in SiNP was recorded above 70%. After coating, the association efficiency of insulin increased up to 90%, showing the high affinity of the protein to the hydrophilic polymer chains. Circular dichroism (CD) indicated that no conformation changes of insulin structure occurred after loading the peptide into SiNP. Nano-differential scanning calorimetry (nDSC) showed that SiNP shifted the insulin endothermic peak to higher temperatures. The influence of coating on the interaction of nanoparticles with dipalmitoylphosphatidylcholine (DPPC) biomembrane models was also evaluated by nDSC. The increase of ΔH values suggested a strong association of non-coated SiNP and those PEGylated nanoparticles coated with DPPC polar heads by forming hydrogen bonds and/or by electrostatic interaction. The mucoadhesive properties of nanoparticles were examined by studying the interaction with mucin in aqueous solution. SiNP coated with alginate or chitosan showed high contact with mucin. On the other hand, non-coated SiNP and PEGylated SiNP showed lower interaction with mucin, indicating that these nanoparticles can interdiffuse across mucus network. The results of the present work provide valuable data in assessing the in vitro performance of insulin-loaded SiNP coated with mucoadhesive polymers., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Anti-allergic agents are used to treat a great variety of diseases which usually involve an inflammation reaction. These compounds act by inhibiting the release and the effects of inflammatory mediators (e.g. histamine) in the target tissue. The purpose of anti-allergy therapy is to deliver the drug to its local of action in a therapeutic concentration, minimizing the undesired side effects. In order to solve some of the anti-allergic agents' physicochemical drawbacks and the limitations associated to conventional pharmaceutical formulations (e.g. poor solubility and absorption, skin permeation, stability), novel drug delivery systems, such as cyclodextrins, liposomes, micelles, microemulsions, nano and microparticles, have been developed. Depending on the allergic condition, several administration routes are used to deliver anti-allergic agents, each with its own disadvantages to overcome. In the literature, there are a vast number of papers concerning novel delivery systems for anti-allergic agents, making it difficult to evaluate the information and the promising outcomes. The aim of the present review article is to compile the recent (i.e. in the new millennium) improvements of novel drug delivery technology focusing on the achievement of anti-allergic therapeutic delivery. The potential intrinsic benefits of these systems will reflect an increased therapeutic adherence and better patients' life quality. A critical prospect of future clinical trial directions will also be discussed.

The present work aimed at studying the interaction between insulin and SiNP surfaced with mucoadhesive polymers (chitosan, sodium alginate or polyethylene glycol) and the evaluation of their biocompatibility with HepG2 and Caco-2 cell lines, which mimic in vivo the target of insulin-loaded nanoparticles upon oral administration. Thus, a systematic physicochemical study of the surface-modified insulin-silica nanoparticles (Ins-SiNP) using mucoadhesive polymers has been described. The surfacing of nanoparticle involved the coating of silica nanoparticles (SiNP) with different mucoadhesive polymers, to achieve high contact between the systems and the gut mucosa to enhance the oral insulin bioavailability. SiNP were prepared by a modified Stöber method at room temperature via hydrolysis and condensation of tetraethyl orthosilicate (TEOS). Interaction between insulin and nanoparticles was assessed by differential scanning calorimetry (DSC), X-ray and Fourier-transform infrared (FTIR) studies. The high efficiency of nanoparticles' coating resulted in more stable system. FTIR spectra of insulin-loaded nanoparticles showed amide absorption bands which are characteristic of α-helix content. In general, all developed nanoparticles demonstrated high biocompatible, at the tested concentrations (50-500 μg/mL), revealing no or low toxicity in the two human cancer cell lines (HepG2 and Caco-2). In conclusion, the developed insulin-loaded SiNP surfaced with mucoadhesive polymers demonstrated its added value for oral administration of proteins., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The present paper focuses on the development and in vitro/in vivo characterization of nanoparticles composed of poly-(D,L)-Lactide-co-Glycolide (PLGA) loading Bacoside-A, as a new approach for the brain delivery of the neuroprotective drug for the treatment of neurodegenerative disorders (e.g. Alzheimer Disease). Bacoside-A-loaded PLGA nanoparticles were prepared via o/w emulsion solvent evaporation technique. Surface of the nanoparticles were modified by coating with polysorbate 80 to facilitate the crossing of the blood brain barrier (BBB), and the processing parameters (i.e. sonication time, the concentration of polymer (PLGA) and surfactant (polysorbate 80), and drug-polymer ratio) were optimized with the aim to achieve a high production yield. Brain targeting potential of the nanoparticles was evaluated by in vivo studies using Wistar albino rats. The nanoparticles produced by optimal formulation were within the nanosized range (70-200 nm) with relatively low polydispersity index (0.391 ± 1.2). The encapsulation efficiency of Bacoside-A in PLGA nanoparticles was 57.11 ± 7.11%, with a drug loading capacity of 20.5 ± 1.98%. SEM images showed the spherical shape of the PLGA nanoparticles, whereas their low crystallinity was demonstrated by X-ray studies, which also confirmed no chemical interactions between the drug and polymer molecules. The in vitro release of Bacoside-A from the PLGA nanoparticles followed a sustained release pattern with a maximum release of up to 83.04 ± 2.55% in 48 h. When compared to pure drug solution (2.56 ± 1.23 μg/g tissue), in vivo study demonstrated higher brain concentration of Bacoside-A (23.94 ± 1.74 μg/g tissue) suggesting a significant role of surface coated nanoparticles on brain targeting. The results indicate the potential of surface modified PLGA nanoparticles for the delivery of Bacoside-A to the brain., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The present study reports the production and characterization of PEG-coated silica nanoparticles (SiNP-PEG) containing insulin for oral administration. High (PEG 20,000) and low (PEG 6000) PEG molecular weights were used in the preparations. SiNP were produced by sol-gel technology followed by PEG adsorption and characterized for in vitro release by Franz diffusion cells. In vitro permeation profile was assessed using everted rat intestine. HPLC method has been validated for the determination of insulin released and permeated. Insulin secondary structure was performed by circular dichroism (CD). Uncoated SiNP allowed slower insulin release in comparison to SiNP-PEG. The coating with high molecular weight PEG did not significantly (p> 0.05) alter insulin release. The slow insulin release is attributed to the affinity of insulin for silanol groups at silica surface. Drug release followed second order kinetics for uncoated and SiNP-PEG at pH 2.0. On the other hand, at pH 6.8, the best fitting was first-order for SiNP-PEG, except for SiNP which showed a Boltzmann behavior. Comparing the values of half-live, SiNP-PEG 20,000 showed a faster diffusion followed by Si-PEG 6000 and SiNP. CD studies showed no conformational changes occurring after protein release from the nanoparticles under gastrointestinal simulated conditions., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The aim of this study was to develop biocompatible lipid-based nanocarriers for retinyl palmitate (RP) to improve its skin delivery, photostability and biocompatibility, and to avoid undesirable topical side effects. RP loaded nanoemulsions (NEs), liposomes (LPs) and solid lipid nanoparticles (SLNs) were characterized in terms of size, surface electrical charge, pH, drug encapsulation efficiency and morphology. Spherical-shaped nanocarriers with a negatively charged surface (>|40|mV) and mean size lower than 275 nm were produced with adequate skin compatibility. The rheological properties showed that aqueous dispersions of SLNs followed a non-Newtonian behavior, pseudoplastic fluid adjusted to Herschel-Bulkley equation, whereas LPs and NEs exhibited a Newtonian behavior. SLNs offered significantly better photoprotection than LPs and NEs for RP. The cumulative amount of drug permeated through human skin at the end of 38 h was 6.67 ± 1.58 μg, 4.36 ± 0.21 μg and 3.64 ± 0.28 μg for NEs, LPs and SLNs, respectively. NEs flux was significantly higher than SLNs and LPs: NEs (0.37 ± 0.12 μg/h) > LPs (0.15 ± 0.09 μg/h) > SLNs (0.10 ± 0.05 μg/h). LPs offered significant higher skin retention than NEs and SLNs. Finally, even though all developed nanocarriers were found to be biocompatible, according to histological studies, NE was the system that most disrupted the skin. These encouraging findings can guide in proper selection of topical carriers among the diversity of available lipid-based nanocarriers, especially when a dermatologic or cosmetic purpose is desired., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Solid lipid nanoparticles (SLN) are colloidal drug and/or gene carriers developed from solid lipids and surfactants that are considered safe. Cationic SLN, usually used for formulating poorly water-soluble drugs and for gene delivery purposes, as positively charged particles may attach to cellular surfaces and be internalized more easily than negatively charged SLN, but they can also cause damage. The main aim of this work was to test a set of cationic SLN and investigate its influence on the amount of reactive oxygen species (ROS), on antioxidant enzymes activities and on possible oxidative damage to membrane lipids in HepG2 cells. The Dichlorofluorescein assay revealed great increase in ROS presence after cell exposure to SLN. While the exposure to SLN increased the activities of superoxide dismutase and glutathione peroxidase it decreased glutathione reductase activity. Although no significant increase in thiobarbituric reactive species was found, a decrease in sulfhydryl groups was detected. These results indicate that cationic SLN caused oxidative stress in HepG2 cells, but under reported exposure conditions HepG2 cells could attenuate the stress and thus the damage to cellular components was minimal., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were developed as alternative to other colloidal carriers. They were designed to overcome lipid nanoemulsions and liposomes in stability and ability to control the release of an encapsulated substance, and at the same time to be better tolerated than polymeric nanoparticles. Since the patenting of SLN discovery, large amount of data became available on the behaviour of these systems in vitro. SLN/NLC have many prerequisites to be a well tolerated carrier - the currently available data seem to confirm it, but there are also some contradictory results. In this review, we collected the available data from cytotoxicity, oxidative stress and hemocompatibility studies in vitro and analysed their outcomes. We also provide a summary of the available data in a form of reference table., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Miconazole is a widely used antifungal agent with poor aqueous solubility, which requires the development of drug delivery systems able to improve its therapeutic activity. For this purpose, a miconazole-loaded nanostructured lipid carriers (NLC) dispersion was prepared and characterized. Further, the dispersion was used to prepare a NLC-based hydrogel formulation proposed as an alternative system to improve the local delivery of miconazole to the oral mucosa. NLC dispersion showed particles in the nanometer range (≈ 200 nm) with low polidispersity index (<0.3), good physical stability and high encapsulation efficiency (>87%). A controlled miconazole release was observed from NLC and NLC-based hydrogel formulations, in contrast to a commercial oral gel formulation, which demonstrated a faster release. Additionally, it was observed that the encapsulation of miconazole in the NLC improved its antifungal activity against Candida albicans. Therefore, it was demonstrated that the encapsulation of miconazole in NLC allows for obtaining the same therapeutic effect of a commercial oral gel formulation, using a 17-fold lower dose of miconazole., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A novel nanocarrier based on solid lipid nanoparticles (SLNs) was developed for insulin delivery using a novel double emulsion method. Physical stability of particles was assessed by size analysis using dynamic light scattering (DLS), matrix crystallinity by differential scanning calorimetry (DSC) and toxicity analysis by Drosophila melanogaster testing. Insulin-SLNs were composed of Softisan®100 1.25% wt, Lutrol®F68 1% wt, soybean lecithin 0.125% wt, and loaded with 0.73-0.58 mg/mL peptide. Placebo-SLNs (insulin-free) also contained 0.025% wt Tween®80. Mean particle sizes of placebo-SLN and insulin-SLN were 958 ± 9.5 and 978 ± 8.3 nm, respectively. The polydispersity index (PI) was 0.28 ± 0.018 and 0.29 ± 0.013, respectively. Polarized light microscopy analysis depicted no aggregation of developed particles. DSC analysis allowed characterizing SLN with 43-51% matrix crystallinity. Using Drosophila melanogaster test, no toxicity was reported for SLN and for the bulk lipid. This study shows that SLNs are promising and helpful to overcome conventional insulin therapy, in particular for their lack of toxicity for oral delivery.

Reactive oxygen species (ROS) are known to cause several human pathologies. For this reason, antioxidants have gained utmost importance because of their potential as prophylactic and therapeutic agents in many diseases. Examples of their application include their use in diabetic patients, as aging drugs, in cancer diseases, Parkinson's, Alzheimer's, autoimmune disorders, and also in inflammation. Antioxidants have limited absorption profiles, therefore low bioavailability and low concentrations at the target site. Efforts have been done towards loading antioxidant molecules in advanced nanoparticulate carriers, e.g., liposomes, polymeric nanoparticles, solid lipid nanoparticles, self-emulsifying drug delivery system. Examples of -successful achievements include the encapsulation of drugs and other active ingredients, e.g., coenzyme Q10, vitamin E and vitamin A, resveratrol and polyphenols, curcumin, lycopene, silymarin, and superoxide dismutase. This review focuses on the comprehensive analysis of using nanoparticulate carriers for loading these molecules for oral administration.

Solid lipid nanoparticles (SLNs) produced from multiple emulsions technology theoretically enclose an inner aqueous compartment suitable for hydrophilic biomolecules. This paper reports a 3(3) full factorial design study to optimize SLNs formulations for hydrophilic biomolecules. The concentrations of solid lipid, lipophilic and hydrophilic emulsifiers were set as the 3 independent variables. Mean particle size (Z-Ave), polydispersity index (PI) and zeta potential (ZP) were set as the dependent variables. The selected optimized parameters were set as 1.0 wt% of solid lipid, 0.25 wt% of lipophilic emulsifier and 1.5 wt% of hydrophilic emulsifier. The coating of SLNs with sodium alginate was found to improve the ZP of the lipid particles and these results suggest that the ideal concentration was 0.75 wt%. The influence of low pH (i.e., about 2-3) in the inner aqueous phase was stronger than higher pH values, contributing for the production of larger droplet sizes. Nevertheless, these systems can be useful for the incorporation of biomolecules requiring a pH ranging between 4 and 10. SLNs based on multiple emulsions technology were found to be a promising approach for the incorporation of several hydrophilic drugs, such as proteins and peptides., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This review attempts to provide an updated compilation of studies reported in the literature pertaining to production of nanocarriers encasing peptides and/or proteins, in a way that helps the reader direct a bibliographic search and develop an integrated perspective of the subject. Highlights are given to bioactive proteins and peptides, with a special focus on those from dairy sources (including physicochemical characteristics and properties, and biopharmaceutical application possibilities of e.g. lactoferrin and glycomacropeptide), as well as to nanocarrier functional targeting. Features associated with micro- and (multiple) nanoemulsions, micellar systems, liposomes and solid lipid nanoparticles, together with biopharmaceutical considerations, are presented in the text in a systematic fashion.

Due to the multiple barriers imposed by the eye against the penetration of drugs, the ocular delivery and targeting are considered difficult to achieve. A major challenge in ocular drug therapy is to improve the poor bioavailability of topically applied ophthalmic drugs by overcoming the severe constraints imposed by the eye on drug absorption. One of the promising strategies nowadays is the use of colloidal carrier systems characterized by a submicron-meter size. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) represent promising alternatives to conventional and very popular ocular carrier systems, such as the nanoemulsions, liposomes, and polymeric nanoparticles. Nevertheless, taking into account the characteristics of the eye, morphometrical properties of the colloidal systems (e.g., average particle size and polydispersion) may represent a limiting factor for topical application without induced corneal irritation, being responsible for the selected system. This review article focuses on the application of lipid nanoparticles (SLN, NLC) as carriers for both non-steroidal and steroidal anti-inflammatory drugs for the treatment of ocular inflammatory disorders. Major benefits, as well as shortcomings, of ocular inflammation conditions are described, in particular upon management of inflammation induced by ocular surgery (e.g., cataracts, refractive surgery). Particular emphasis is given to the clinical choices currently available, while examining the most recent drugs that have been approved.

The introduction of nanoparticulate carriers (NPC) in the pharmaceutic and nutraceutic fields has changed the definitions of disease management and treatment, diagnosis, as well as the supply food chain in the agri-food sector. NPC composed of synthetic polymers, proteins or polysaccharides gather interesting properties to be used for oral administration of pharmaceutics and nutraceutics. Oral administration remains the most convenient way of delivering drugs (e.g. peptides, proteins and nucleic acids) since these suffer similar metabolic pathways as food supply. Recent advances in biotechnology have produced highly potent new molecules however with low oral bioavailability. A suitable and promising approach to overcome their sensitivity to chemical and enzymatic hydrolysis as well as the poor cellular uptake, would be their entrapment within suitable gastrointestinal (GI) resistant NPC. Increasing attention has been paid to the potential use of NPC for peptides, proteins, antioxidants (carotenoids, omega fatty acids, coenzyme Q10), vitamins, probiotics, for oral administration. This review focuses on the most important materials to produce NPC for oral administration, and the most recent achievements in the production techniques and bioactives successfully delivered by these means.

The aim of this study was to develop nanostructured lipid carriers (NLC) for topical delivery of fluticasone propionate (FP) with the aim to further improve the safety profile and decrease the adverse-side effects commonly reported in topical corticotherapy. NLC are colloidal drug-carriers consisting of a blend of a solid lipid and a small amount of liquid lipid since these carriers have proved to be effective in epidermal targeting in particular of glucocorticoids. NLC consisting of glyceryl palmito-stearate, and PEG-containing medium chain triglycerides mixture, stabilised by polysorbate 80 and soybean phosphatidylcholine were prepared. A mean particle size between 380 and 408 nm and entrapment efficacy of 95% were obtained for FP-loaded NLC. The crystallinity and polymorphic phase behaviour of FP-free and FP-loaded NLC were examined by differential scanning calorimetry and wide angle X-ray diffraction. Results revealed a low-crystalline structure and confirmed the incorporation of FP into the particles. The suitability of PEG-containing liquid lipids to form the lipid matrix of NLC was also confirmed.

Lipid-based Delivery Systems (LDS) has been the focus of potential strategies in drug delivery for several years. A great deal of work has been invested on how to exploit their biocompatible and biodegradable nature, in combination with their nanosize range in a profitable way in the field of nanomedicines. A number of drugs loaded in LDS have been already tested in vivo successfully. However, in vivo behaviour of nanosized materials differs from their bulk counterparts (and also change drug properties), mainly depending on the particular LDS physicochemical characteristics. These may have huge impact on the toxicity of the system, despite the physiological nature of the lipid materials. This note on the regulatory concerns and toxicity assessment in LDS suggests that current knowledge of public and scientific communities is lacking, requiring intensive research and policy measures to provide a deep understanding on toxicological risks.