Search

The objective of this study was to develop and evaluate solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) utilizing sucrose ester as a stabilizer/emulsifier for the controlled release of drug/active. Both SLNs and NLCs were prepared using different sugar esters to screen out the most suitable stabilizer. Clotrimazole was used as a model active/drug. The effect of different formulation variables on the particle size, polydispersity index and drug encapsulation efficiency of SLNs and NLCs was evaluated and compared. SLNs and NLCs were physicochemically characterized and compared using Cryo-SEM, DSC and XRD. Furthermore, a drug release study of SLNs and NLCs was conducted. Finally, physicochemical stability (size, PI, ZP, EE) of the SLNs and NLCs was checked at 25 ± 2 °C and at 2-8 °C. Among the sucrose esters, D-1216 was found to be most suitable for both SLNs and NLCs. Formulation variables exhibited a significant impact on size, PI and EE of the nanoparticles. SLNs with ∼120 nm size, ∼0.23 PI, ∼I26I mV ZP, ∼87% EE and NLCs with ∼160 nm size, 0.15 PI, ∼I26I mV ZP, ∼88% EE were produced. Cryo-SEM revealed spherical particles with a smooth surface but did not exhibit any difference in surface morphology between SLNs and NLCs. DSC and XRD results demonstrated the disappearance of clotrimazole peak(s) in drug-loaded SLNs and NLCs. Faster drug release was observed from SLNs than NLCs. NLCs were found to be more stable than SLNs in terms of size, PI, EE and drug release. The results indicated that both SLNs and NLCs stabilized with sucrose ester D-1216 can be used as controlled release carriers although NLCs have an edge over SLNs.

This study focused on: (i) feasibility of the previously developed sucrose ester stabilized SLNs and NLCs to encapsulate different imidazole antifungal drugs and (ii) preparation and evaluation of topical gel formulations of those SLNs and NLCs. Three imidazole antifungal drugs; clotrimazole, ketoconazole and climbazole were selected for this study. The results suggested that size, size distribution and drug encapsulation efficiency depend on the drug molecule and type of nanoparticles (SLN/NLC). The drug release experiment always showed faster drug release from NLCs than SLNs when the same drug molecule was loaded in both nanoparticles. However, drug release rate from both SLNs and NLCs followed the order of climbazole > ketoconazole > clotrimazole. NLCs demonstrated better physicochemical stability than SLNs in the case of all drugs. The drug release rate from ketoconazole- and clotrimazole-loaded SLNs became faster after three months than a fresh formulation. There was no significant change in drug release rate from climbazole-loaded SLNs and all drug-loaded NLCs. Gel formulations of SLNs and NLCs were prepared using polycarbophil polymer. Continuous flow measurements demonstrated non-Newtonian flow with shear-thinning behavior and thixotropy. Oscillation measurements depicted viscoelasticity of the gel formulations. Similar to nanoparticle dispersion, drug release rate from SLN- and NLC-gel was in the order of climbazole > ketoconazole > clotrimazole. However, significantly slower drug release was noticed from all gel formulations than their nanoparticle counterparts. Unlike nanoparticle dispersions, no significant difference in drug release from gel formulations containing SLNs and NLCs was observed for each drug. This study concludes that gel formulation of imidazole drug-loaded SLNs and NLCs can be used for sustained/prolonged topical delivery of the drugs.

Nanomaterials have made a significant impact on cancer therapeutics and an emergence of polymeric nanoparticle provides a unique platform for delivery of drug molecules of diverse nature. Nanoparticles can be targeted at the tumor cells due to enhanced permeability and retention effect. Moreover, nanoparticles can be grafted by various ligands on their surface to target the specific receptors overexpressed by cancer cells or angiogenic endothelial cells. These approaches ultimately result in longer circulation half-lives, improved drug pharmacokinetics, reduced side effects of therapeutically active substances and overcoming cancer chemo-resistance thereby enhancing the therapeutic efficacy of the treatment. This review article summarizes the recent efforts in cancer nanochemotherapeutics using polymeric nanoparticles with a special reference to their pharmacokinetic and biodistribution profiles, their role in reversing multidrug resistance in cancer and strategies of tumor targeting with them, along with the challenges in the field.

In recent years, solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) are among the popular research topics for the delivery of lipophilic drugs. Although SLNs have demonstrated several beneficial properties as drug-carrier, limited drug-loading and expulsion of drug during storage led to the development of NLCs. However, the superiority of NLCs over SLNs has not been fully established yet due to the contradictory results. In this study, SLNs and NLCs were developed using clotrimazole as model drug. Size, polydispersity index (PI), zeta potential (ZP), drug-loading (L), drug encapsulation efficiency (EE), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffractometry (XRD), drug release and stability of SLNs and NLCs were compared. Critical process parameters exhibited significant impact on the nanoparticles' properties. Size, PI, ZP and EE of the developed SLNs and NLCs were<100 nm, <0.17, <-22 mV and>82%, respectively. SEM images of SLNs and NLCs revealed spherical shaped particles (≈ 100 nm). DSC and XRD studies indicated slight difference between SLNs and NLCs as well as disappearance of the crystalline peak(s) of the encapsulated drug. NLCs demonstrated faster drug release than SLNs at low drug-loading, whereas there was no significant difference in drug release from SLNs and NLCs at high drug-loading. However, sustained/prolonged drug release was observed from both formulations. Furthermore, this study suggests that the drug release experiment should be designed considering the final application (topical/oral/parenteral) of the product. Regarding stability, NLCs showed better stability (in terms of size, PI, EE and L) than SLNs at 25°C. Moreover, there was no significant difference in drug release profile of NLCs after 3 months storage in compare to fresh NLCs, while significant change in drug release rate was observed in case of SLNs. Therefore, NLCs have an edge over SLNs., (Copyright © 2012 Elsevier B.V. All rights reserved.)

The aim of this study was to develop a colon-specific microparticle formulation based on pectin. Resveratrol was used as a model drug due to its potential therapeutic efficacy on colitis and colon cancer. Microparticles were produced by cross-linking pectin molecules with zinc ions and with glutaraldehyde as hardening agent for pectins. Different microparticles were prepared by varying the formulation variables. Effect of these formulation variables were investigated on particle shape and size, moisture content and weight-loss during drying, encapsulation efficiency, swelling-erosion ratio, and drug release pattern of the formulated microparticles. Formulation conditions were optimized based on the in vitro drug release study. Morphology, Fourier transform infrared spectroscopy, stability, and in vivo pharmacokinetic study of the microparticles prepared at the optimized formulation conditions were performed. Microparticles were spherical with <1 mm diameter and encapsulation efficiencies of >94%. The glutaraldehyde-modified microparticles prepared at optimized formulation conditions revealed colon specific in vitro and in vivo drug release. Plasma appearance of drug was delayed for 4-5 h after their administration directly into stomach, but displayed comparable area under the curve to other controls in the experiment, indicating the potential of the developed formulation as a colon-specific drug delivery system.

Zinc-pectin-chitosan composite microparticles were designed and developed as colon-specific carrier. Resveratrol was used as model drug due to its potential activity on colon diseases. Formulations were produced by varying different formulation parameters (cross-linking pH, chitosan concentration, cross-linking time, molecular weight of chitosan, and drug concentration). Single-step formulation technique was compared with multi-step technique. Effect of these parameters was investigated on shape, size, weight, weight loss (WL), moisture content (MC), encapsulation efficiency (EE), drug loading (L), and drug release pattern of the microparticles. The formulation conditions were optimized from the drug release study. In vivo pharmacokinetics of the zinc-pectinate particles was compared with the zinc-pectin-chitosan composite particles in rats. Formulations were spherical with 920.48-1107.56 μm size, 21.19-24.27 mg weight of 50 particles, 89.83-94.34% WL, 8.31-13.25% MC, 96.95-98.85% EE, and 17.82-48.31% L. Formulation parameters showed significant influence on drug release pattern from the formulations. Formulation prepared at pH 1.5, 1% chitosan, 120 min cross-linking time, and pectin:drug at 3:1 ratio demonstrated colon-specific drug release. Microparticles were stable at 4 °C and room temperature. Pharmacokinetic study indicated in vivo colon-specific drug release from the zinc-pectin-chitosan composite particles only., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Nanoparticles composed of naturally occurring biodegradable polymers have emerged as potential carriers of various therapeutic agents for controlled drug delivery through the oral route. Chitosan, a cationic polysaccharide, is one of such biodegradable polymers, which has been extensively exploited for the preparation of nanoparticles for oral controlled delivery of several therapeutic agents. In recent years, the area of focus has shifted from chitosan to chitosan derivatized polymers for the preparation of oral nanoparticles due to its vastly improved properties, such as better drug retention capability, improved permeation, enhanced mucoadhesion and sustained release of therapeutic agents. Chitosan derivatized polymers are primarily the quaternized chitosan derivatives, chitosan cyclodextrin complexes, thiolated chitosan, pegylated chitosan and chitosan combined with other peptides. The current review focuses on the recent advancements in the field of oral controlled release via chitosan nanoparticles and discusses about its in vitro and in vivo implications., (© 2010 American Association of Pharmaceutical Scientists)

Lipid nanoparticles based on solid matrix have emerged as potential drug carriers to improve gastrointestinal (GI) absorption and oral bioavailability of several drugs, especially lipophilic compounds. These formulations may also be used for sustained drug release. Solid lipid nanoparticle (SLN) and the newer generation lipid nanoparticle, nanostructured lipid carrier (NLC), have been studied for their capability as oral drug carriers. Biodegradable, biocompatible, and physiological lipids are generally used to prepare these nanoparticles. Hence, toxicity problems related with the polymeric nanoparticles can be minimized. Furthermore, stability of the formulations might increase than other liquid nano-carriers due to the solid matrix of these lipid nanoparticles. These nanoparticles can be produced by different formulation techniques. Scaling up of the production process from lab scale to industrial scale can be easily achieved. Reasonably high drug encapsulation efficiency of the nanoparticles was documented. Oral absorption and bioavailability of several drugs were improved after oral administration of the drug-loaded SLNs or NLCs. In this review, pros and cons, different formulation and characterization techniques, drug incorporation models, GI absorption and oral bioavailability enhancement mechanisms, stability and storage condition of the formulations, and recent advances in oral delivery of the lipid nanoparticles based on solid matrix will be discussed., (© 2010 American Association of Pharmaceutical Scientists)

This study aimed at devising multi-particulate calcium-pectinate (Ca-pectinate) bead formulations for colon-targeted delivery of resveratrol. As Ca-pectinate beads were not sufficient to endure the upper GI environment and premature release of resveratrol occurred before their arrival to the colon, the beads were hardened by adding polyethyleneimine (PEI) in the cross-linking solution. The effects of PEI concentration, cross-linking time, and pectin to resveratrol ratio were investigated on beads' characteristics, encapsulation efficiency, swelling-erosion, and resveratrol retention pattern of formulated beads. Proper conditions were optimized from these studies and optimized beads were further subjected to morphological examination. Formulated beads were spherical with approximately 1 mm diameter. Addition of PEI to the cross-linking solution and a minimum cross-linking time were found to be crucial factors for colon-specific release of resveratrol. As PEI was added in the cross-linking solution, hardening of the bead surface occurred simultaneously with bead formation. Observations from the present study revealed that optimized Ca-pectinate beads hardened with PEI can efficiently encapsulate resveratrol and have potential for colon-specific delivery to the lower GI tract., (2009 Elsevier B.V. All rights reserved.)

Catastrophic global accumulation of non-biodegradable plastic has led to efforts for production of alternative eco-friendly biopolymer. Here, we attempted to produce a biodegradable, cytocompatible and eco-friendly polyhydroxy-butyrate (PHB) from a pigmented Bacillus sp. C1 (2013) (KF626477) through submerged (SmF) and solid-state fermentation (SSF). Under SmF and SSF, 0.60 g l−1 and 1.56 g l−1 of PHB with 0.497 g l−1 of yellow fluorescent pigment (YFP) was produced. Fourier transform infrared (FTIR) absorption bands at 1719–1720 cm−1 indicate the presence of C=O group of PHB. Nuclear magnetic resonance (NMR) exhibited the typical chemical shift patterns of PHB, and crystallinity was confirmed from X-ray diffraction (XRD). The melting temperature (Tm), degradation temperature (Td) and crystallinity (Xc) of extracted PHB were found to be 171 °C, 288 °C and 35%, respectively. FACS (Fluorescence-activated cell sorting) confirmed cytocompatibility of PHB at 400 µg ml−1 in mouse fibroblast line. Moreover, biodegradability and elevated cytocompatibility of the PHB produced through SSF make them highly potential biomaterials to be used as a drug delivery carrier in future. [ABSTRACT FROM AUTHOR]

Abstract: The obstacles in translating liposome formulations into marketable products could be attributed to their physical instabilities upon long-term storage as aqueous dispersions. Lyophilization is the most commonly used technique to improve physical stability of liposomes. The development of stable, lyophilized liposomes is focused primarily on the cholesterol-containing liposomes or pure phosphatidylcholine-based liposomes, with minimal studies on cholesterol-free, pegylated (CF-PEG) liposomes which have emerged as an important class of liposome drug carriers. Hence, it is our interest to investigate the effect of lyophilization on CF-PEG liposomes, and specifically, on drug loading via the passive equilibration method. Three different sugar cryoprotectants were used at two different sugar-to-lipid molar ratios (S/L). Our results demonstrated that CF-PEG liposomes lyophilized with sucrose at S/L=5:1 yielded the best cryoprotective effect, as characterized by size, polydispersity indices, and microscopic examination upon liposome reconstitution. The lyophilized liposomes had low water content of 2.59±0.18%. Of note, lyophilized CF-PEG liposomes exhibited two-fold increase in drug content when carboplatin was loaded via the passive equilibration method, and the in vitro drug release profile of these liposomes were not different from that of the non-lyophilized counterparts. Taken together, we envisioned that a stable, lyophilized empty CF-PEG liposome system could be coupled to hydrophilic drug loading via the passive equilibration method to produce a liposomal drug kit product. [Copyright &y& Elsevier]

Calcium-pectinate (Ca-pectinate) beads have shown immense potential as colon-specific drug carrier. However, Ca-pectinate itself is unable to prevent its swelling/degradation in the upper gastro-intestinal (GI) conditions. Hence, polyethyleneimine (PEI) was added in the cross-linking solution to strengthen the Ca-pectinate network. Resveratrol was used as a model drug due to its promising therapeutic activity towards several colonic diseases. Beads were prepared by varying cross-linking solution pH and other formulation variables. The effects of these formulation variables were investigated on the bead's characteristics. Furthermore, surface morphology, drug--polymer interaction, stability, and in  vivo pharmacokinetic study of the optimized formulation were performed. The optimized PEI-modified beads prevented drug release in the upper GI conditions, while released the drug in simulated colonic fluid. Furthermore, in  vivo pharmacokinetics studies in rats demonstrated delayed appearance of drug in blood after oral administration. The optimized Ca-pectinate beads demonstrated both in  vitro and in  vivo colon-specific drug release. [ABSTRACT FROM AUTHOR]