Search

Reflectance spectrometers with antomated scanning capabilities can gather compositional information directly from the surface of drill core. To showcase the usefulness of this analytical technique, 300 m of drill core from the Olympic Dam iron oxide copper-gold (IOCG) deposit, South Australia, were scanned using HyLogger. The reflectance spectra (400-2,500 nm) were analyzed to identity hematite and phengite, which are the most important alteration minerals at Olympic Dam. The results were plotted as a function of depth to produce a log that accurately identified ore-bearing and barren rocks. The position of the most intense absorption feature between 850 and 970 nm was found to correspond to iron concentration, and the intensity of the most intense absorption feature between 2,190 and 2,230 nm was found to correspond to aluminum concentration. In addition, phengite located near the ore-bearing zone was found to contain more aluminum than phengite located in the barren rocks, and this difference in phengite mineral chemistry was observable in the reflectance spectra between 2,190 and 2,230 nm. [ABSTRACT FROM AUTHOR]

The Highland Valley Copper (HVC) district in British Columbia, Canada, is host to at least four major porphyry Cu systems: Bethlehem (~209 Ma), and Valley, Lornex, and Highmont (~208 to 207 Ma). High spatial resolution (0.2–1.0 mm/pixel) hyperspectral imagery in the shortwave infrared (SWIR) were acquired on 755 rock samples and 400 m of continuous drill core. Spectral metrics are used to measure the relative abundance of 12 minerals and an additional metric is derived to estimate white mica grain size. In the Valley and Lornex deposits, coarse-grained white mica is associated with mineralization and is detectable up to 4 km away from the deposits. Kaolinite is present within 2 km of the mineralized centers but does not necessarily occur within strongly mineralized intervals. Prehnite is ubiquitous from 4 to 8 km from the deposits. In the Bethlehem deposit, tourmaline and epidote are associated with mineralization. We propose a spectral alteration score based on these proximal hyperspectral SWIR mineralogical patterns to assist explorers in targeting porphyry Cu systems when using drill core, surface rock samples and potentially remote sensing imagery. In a production environment, this metric could serve to facilitate ore-sorting. [ABSTRACT FROM AUTHOR]

• Estimation of mineral chemistry from SWIR data. • Correlation between Au content and mineral chemistry. • Vectoring to mineralization using SWIR data on regional scales. • High-resolution downhole hyperspectral imaging. Canadian Malartic is a large-tonnage, low-grade Archean gold deposit (16.3 Moz, 1.08 g/t Au) located in the Abitibi region of Québec, Canada. A large part of the mineralization is hosted in the Pontiac Group metasedimentary rocks, which consist of mudstones to greywackes at upper greenschist to amphibolite facies. In exploration and production environments, these lithologies are challenging to characterize by conventional core logging methods, while in a research setting thin section-sized samples (2 cm × 4 cm) do not capture the full extent of mineralogical variability, which can extend from centimeters to meters away from mineralized zones. Here, high-resolution hyperspectral imagery (0.2–1.0 mm/pixel) in both shortwave infrared (SWIR, 1000–2500 nm) and longwave infrared (LWIR, 8000–12000 nm) is acquired for over two thousand meters of drill core, and is used to visualize changes in mineralogy and mineral chemistry related to metamorphism and hydrothermal alteration. Unaltered metasedimentary rocks contain metamorphic white mica with AlVI contents varying between 1.90 and 1.75 apfu (2195 to 2203 nm), depending on metamorphic grade. Hydrothermal alteration is characterized by white mica which becomes progressively more phengitic with increasing alteration intensity, with AlVI contents ranging from 1.70 to 1.50 apfu (2204 to 2212 nm). Phengitic white mica extends from meters to tens of meters away from major mineralized zones, and can be used as a vector towards mineralization in an exploration setting. White mica composition is correlated to Au content, and can be used to discriminate between unmineralized (<0.3 g/t Au, 2195–2204 nm), weakly mineralized (>0.3 g/t Au, 2205–2208 nm), and highly mineralized (>1.0 g/t Au, >2208 nm) samples, which is a simple metric that can directly be applied to sort ore in a production environment. The Mg# (molar Mg/[Mg + Fe]) of biotite, on the other hand, is unaffected by metamorphic grade, and consistently is Mg# 55–60 (2251–2250 nm) in unaltered samples. In mineralized samples, biotite is Mg-rich (Mg# >65, <2249 nm), but rapidly grades into background compositions outside of the ore zones. LWIR hyperspectral data is used in drill core to estimate silicification abundance from the strength of the 9200 nm quartz reflectance peak. Peak strength was generally in good agreement with the silicification abundance estimated by core logging, and is therefore a metric that can directly be used for characterization of this parameter in exploration and production environments. Over 1500 SWIR point measurements were also acquired in a 50 km by 15 km area around the deposit, and were used to delineate metamorphic isograds on regional scales, and a large 12 km by 3 km hydrothermal alteration halo around the Canadian Malartic deposit. Similar measurements, if performed along the over 200 km long Cadillac-Larder Lake Deformation zone, could be used to rapidly delineate other potentially mineralized areas. [ABSTRACT FROM AUTHOR]