Search

A small dimension Laval nozzle connected to a compact high enthalpy source equipped with cavity ringdown spectroscopy (CRDS) is used to produce vibrationally hot and rotationally cold high-resolution infrared spectra of polyatomic molecules in the 1.67 µm region. The Laval nozzle was machined in isostatic graphite, which is capable of withstanding high stagnation temperatures. It is characterized by a throat diameter of 2 mm and an exit diameter of 24 mm. It was designed to operate with argon heated up to 2000 K and to produce a quasi-unidirectional flow to reduce the Doppler effect responsible for line broadening. The hypersonic flow was characterized using computational fluid dynamics simulations, Pitot measurements, and CRDS. A Mach number evolving from 10 at the nozzle exit up to 18.3 before the occurrence of a first oblique shock wave was measured. Two different gases, carbon monoxide (CO) and methane (CH4), were used as test molecules. Vibrational (Tvib) and rotational (Trot) temperatures were extracted from the recorded infrared spectrum, leading to Tvib = 1346 ± 52 K and Trot = 12 ± 1 K for CO. A rotational temperature of 30 ± 3 K was measured for CH4, while two vibrational temperatures were necessary to reproduce the observed intensities. The population distribution between vibrational polyads was correctly described with T vib I = 894 ± 47 K , while the population distribution within a given polyad (namely, the dyad or the pentad) was modeled correctly by T vib II = 54 ± 4 K , testifying to a more rapid vibrational relaxation between the vibrational energy levels constituting a polyad. [ABSTRACT FROM AUTHOR]

Creating a supersonic jet in the laboratory is both a challenging and an expensive task. The supersonic flow is sensitive to the shape of the wall bounding it because a shock could be developed at the sharp edges. Moreover, the growth of boundary layer, within and outside the nozzle, makes the design of a convergent-divergent nozzle a sophisticated work. The present work proposes an optimization algorithm that is believed to be efficient in constructing a nozzle contour to deliver a shock-free radially uniform flow at the exit plane. The steepest descent optimization technique is employed to obtain the shape with minimum radial velocity at the outlet, along with restriction on the inlet angle, i.e., the angle of divergence immediately downstream the throat. Three different ways of implementing the constraints are discussed and compared with the experimental results after fabricating the nozzle. The optimized nozzle shows a potential core of 7 throat diameters height at the nozzle exit and an axial extent of 28 throat diameters downstream the exit plane. Further, the nozzle appears to operate efficiently even after increasing the nominal total temperature by 25% or decreasing it by 50%. [ABSTRACT FROM AUTHOR]