Search

We propose a theoretical model for the influence of confinement on biomolecular binding at the single-molecule scale at equilibrium, based on the change of the number of microstates (localization and orientation) upon reaction. Three cases are discussed: DNA sequences shorter and longer than the single strain DNA Kuhn length and spherical proteins, confined into a spherical container (liposome, droplet, etc.). The influence of confinement is found to be highly dependent on the molecular structure and significant for large molecules (relative to container size)., (© 2021 Wiley-VCH GmbH.)

Light can be used to spatially resolve electrochemical measurements on a semiconductor electrode. This phenomenon has been explored to detect DNA hybridization with light-addressable potentiometric sensors and, more recently, with light-addressable amperometric sensors based on organic-monolayer-protected Si(100). Here, a contribution to the field is presented by comparing sensing performances when bovine serum albumin (BSA) and hexaethylene glycol (OEG 6 ) are employed as antifouling layers that resist nonspecific adsorption to the DNA-modified interface on Si(100) devices. What is observed is that both sensors based on BSA or OEG 6 initially allow electrochemical distinction among complementary, noncomplementary, and mismatched DNA targets. However, only surfaces based on OEG 6 can sustain electroactivity over time. Our results suggest that this relates to accelerated SiO x formation occasioned by BSA proteins adsorbing on monolayer-protected Si(100) surfaces. Therefore, DNA biosensors were analytically explored on low-doped Si(100) electrodes modified on the molecular level with OEG 6 as an antifouling layer. First, light-activated electrochemical responses were recorded over a range of complementary DNA target concentrations. A linear semilog relation was obtained from 1.0 × 10 -11 to 1.0 × 10 -6 mol L -1 with a correlation coefficient of 0.942. Then, measurements with three independent surfaces indicated a relative standard deviation of 4.5%. Finally, selectivity tests were successfully performed in complex samples consisting of a cocktail mixture of four different DNA sequences. Together, these results indicate that reliable and stable light-activated amperometric DNA sensors can be achieved on Si(100) by employing OEG 6 as an antifouling layer.

Electrochemical DNA biosensors composed of a redox marker modified nucleic acid probe tethered to a solid electrode is a common experimental construct for detecting DNA and RNA targets, proteins, inorganic ions, and even small molecules. This class of biosensors generally relies on the binding-induced conformational changes in the distance of the redox marker relative to the electrode surface such that the charge transfer is altered. The conventional design is to attach the redox species to the distal end of a surface-bound nucleic acid strand. Here we show the impact of the position of the redox marker, whether on the distal or proximal end of the DNA monolayer, on the DNA interface electrochemistry. Somewhat unexpectedly, greater currents were obtained when the redox molecules were located on the distal end of the surface-bound DNA monolayer, notionally furthest away from the electrode, compared with currents when the redox species were located on the proximal end, close to the electrode. Our results suggest that a limitation in ion accessibility is the reason why smaller currents were obtained for the redox markers located at the bottom of the DNA monolayer. This understanding shows that to allow the quantification of the amount of redox labeled target DNA strand that hybridizes to probe DNA immobilized on the electrode surface, the redox species must be on the distal end of the surface-bound duplex.

Bacterial resistance to conventional antibiotics necessitates the identification of novel leads for infection control. Interference with extracellular phenomena, such as quorum sensing, extracellular DNA integrity and redox active metabolite release, represents a new frontier to control human pathogens such as Pseudomonas aeruginosa and hence reduce mortality. Here we reveal that the extracellular redox active virulence factor pyocyanin produced by P. aeruginosa binds directly to the deoxyribose-phosphate backbone of DNA and intercalates with DNA nitrogenous base pair regions. Binding results in local perturbations of the DNA double helix structure and enhanced electron transfer along the nucleic acid polymer. Pyocyanin binding to DNA also increases DNA solution viscosity. In contrast, antioxidants interacting with DNA and pyocyanin decrease DNA solution viscosity. Biofilms deficient in pyocyanin production and biofilms lacking extracellular DNA show similar architecture indicating the interaction is important in P. aeruginosa biofilm formation.

Two different interfaces prepared via UV-hydrosilylation of undecylenic acid and 1,8-nonadiyne on silicon(111) have been explored to develop a robust electrochemical DNA sensor. Electrodes modified with undecylenic acid were found to stably immobilise DNA but could not resist the growth of insulating oxides, whereas 1,8-nonadiyne modified electrodes satisfy both requirements.

Electrochemical DNA biosensors exploit the affinity of single-stranded DNA for complementary strands of DNA and are used in the detection of specific sequences of DNA with a view towards developing portable analytical devices. Great progress has been made in this field but there are still numerous challenges to overcome. This review for researchers new to the field describes the components of electrochemical DNA biosensors and the important issues in their design. Methods of transducing DNA binding events are discussed along with future directions for DNA biosensors.

Hydrosilylation of alkenes with epoxide-terminated tri(ethylene oxide) moieties on Si-H surfaces yields homogeneous monolayers for the efficient coupling of biomolecules. The wetting properties of the epoxide-functionalized surface allow for the spotting of solutions of biomolecules, making the surface amenable to microarraying. Immobilization of thiolated DNA was achieved in a single step to fabricate biorecognition interfaces showing the hybridization of complementary DNA at low concentrations and negligible binding of noncomplementary DNA.

The charge-transfer properties of DNA duplexes are exploited to produce a fast, simple, sensitive, and selective DNA biosensor by exposing the DNA recognition interface to a sample containing target DNA and the redox-active intercalator, anthraquinonemonosulfonic acid (AQMS). Electrochemistry from electron transfer through the DNA to AQMS intercalated into DNA duplexes can be differentiated from electrochemistry due to direct access of the AQMS to the electrode surface due to the difference in the environment of the AQMS giving a shift in the potential at which the molecule is reduced. The ability to distinguish between the two electrochemical signals enables DNA hybridization to be monitored in real time. This in situ detection scheme has good selectivity, being able to differentiate between a complementary target DNA sequence and one containing either C-A or G-A single-base mismatches. The concentration detection limit of the biosensor is 0.5 nM (1 pmol) with an assay time of 1 h. The fact that the end user is only required to simultaneously add the sample containing the target DNA and AQMS gives a DNA biosensor that is highly compatible with PCR on chip technologies.

The effect of the surface chemistry of DNA recognition interfaces on DNA hybridization at a gold surface was investigated using both electrochemistry and the quartz crystal microbalance (QCM) technique. Different DNA recognition interfaces were prepared using a two-component self-assembled monolayer consisting of thiolated 20-mer probe single-stranded DNA (ss-DNA) containing either a 3'-mercaptopropyl or a 3'-mercaptohexyl linker group and an alcohol-terminated diluent layer with 2-, 6-, or 11-carbon length. The influence of the interfacial design on the hybridization efficiency, the affinity constant (Ka) describing hybridization, and the kinetics of hybridization was assessed. It was found that the further the DNA was above the surface defined by the diluent layer the higher the hybridization efficiency and Ka. The kinetics of DNA hybridization was assessed using both a QCM and an electrochemical approach to ascertain the influence of the interface on both the initial binding of target DNA to the surface and the formation of a complete duplex. These measurements showed that the length of the diluent layer has a large impact on the time taken to form a perfect duplex but no impact on the initial recognition of the target DNA by the immobilized probe DNA.

The interaction of drugs with DNA is among the most important aspects of biological studies in drug discovery and pharmaceutical development processes. In recent years there has been a growing interest in the electrochemical investigation of interaction between anticancer drugs and DNA. Observing the pre and post electrochemical signals of DNA or drug interaction provides good evidence for the interaction mechanism to be elucidated. Also this interaction could be used for the quantification of these drugs and for the determination of new drugs targeting DNA. Electrochemical approach can provide new insight into rational drug design and would lead to further understanding of the interaction mechanism between anticancer drugs and DNA.

Electroactive nucleoside triphosphates ("electrotides") have been incorporated into primers by DNA polymerase and detected on oligonucleotide surface-assembled monolayers. Four electrotides bearing three different electroactive moieties-ferrocene, vinylferrocene, and anthraquinone-are detected in four alternative formats.

A label free electrochemical method of detecting DNA hybridisation is presented based on the change in flexibility between a single strand of DNA and a duplex causing an ion-gating effect where hybridisation opens up the electrode to access of ions.