Search

Double-knotted peptides identified in venoms and synthetic bivalent peptide constructs targeting ion channels are emerging tools for the study of ion channel pharmacology and physiology. These highly complex and disulfide-rich peptides contain two individual cystine knots, each comprising six cysteines and three disulfide bonds. Until now, native double-knotted peptides, such as Hi1a and DkTx, have only been isolated from venom or produced recombinantly, whereas engineered double-knotted peptides have successfully been produced through enzymatic ligation using sortase A to form a seamless amide bond at the ligation site between two knotted toxins, and by alkyne/azide click chemistry, joining two peptide knots via a triazole linkage. To further pursue these double-knotted peptides as pharmacological tools or probes for therapeutically relevant ion channels, we sought to identify a robust methodology resulting in a high yield product that lends itself to rapid production and facile mutational studies. In this study, we evaluated the ligation efficiency of enzymatic (sortase A5°, butelase 1, wild-type OaAEP 1, C247A-OaAEP 1, and peptiligase) and mild chemical approaches (α-ketoacid-hydroxylamine, KAHA) for forming a native amide bond linking the toxins while maintaining the native disulfide connectivity of each pre-folded peptide. We used two Na V 1.7 inhibitors: PaurTx3, a spider-derived gating modifier peptide, and KIIIA, a small cone snail-derived pore blocker peptide, which have previously been shown to increase affinity and inhibitory potency on hNa V 1.7 when ligated together. Correctly folded peptides were successfully ligated in varying yields, without disulfide bond shuffling or reduction, with sortase A5° being the most efficient, resulting in 60% ligation conversion within 15 min. In addition, electrophysiology studies demonstrated that for these two peptides, the amino acid composition of the linker did not affect the activity of the double-knotted peptides. This study demonstrates the powerful application of enzymes in efficiently ligating complex disulfide-rich peptides, paving the way for facile production of double-knotted peptides.

Disulfide bonds typically introduce conformational constraints into peptides and proteins, conferring improved biopharmaceutical properties and greater therapeutic potential. In our opinion, disulfide-rich microdomains from proteins are potentially a rich and under-explored source of drug leads. A survey of the UniProt protein database shows that these domains are widely distributed throughout the plant and animal kingdoms, with the EGF-like domain being the most abundant of these domains. EGF-like domains exhibit large diversity in their disulfide bond topologies and calcium binding modes, which we classify in detail here. We found that many EGF-like domains are associated with disease phenotypes, and the interactions they mediate are potential therapeutic targets. Indeed, EGF-based therapeutic leads have been identified, and we further propose that these domains can be optimized to expand their therapeutic potential using chemical design strategies. This Review highlights the potential of disulfide-rich microdomains as future peptide therapeutics., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Ruthenium-catalysed azide-alkyne cycloaddition (RuAAC) provides access to 1,5-disubstituted 1,2,3-triazole motifs in peptide engineering applications. However, investigation of this motif as a disulfide mimetic in cyclic peptides has been limited, and the structural consequences remain to be studied. We report synthetic strategies to install various triazole linkages into cyclic peptides through backbone cyclisation and RuAAC cross-linking reactions. These linkages were evaluated in four serine protease inhibitors based on sunflower trypsin inhibitor-1. NMR and X-ray crystallography revealed exceptional consensus of bridging distance and backbone conformations (RMSD<0.5 Å) of the triazole linkages compared to the parent disulfide molecules. The triazole-bridged peptides also displayed superior half-lives in liver S9 stability assays compared to disulfide-bridged peptides. This work establishes a foundation for the application of 1,5-disubstituted 1,2,3-triazoles as disulfide mimetics., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

αO-conotoxin GeXIVA from Conus generalis is a potent antagonist of the α9α10 nAChR and analgesic in animal models of pain. This peptide has two disulfide bond cross-links, and the bead and ribbon isomers have similar inhibitory activity against α9α10 nAChRs. We synthesized 12 disulfide-deficient analogues of bead GeXIVA, and all remained potent inhibitors of α9α10 nAChR. The most potent disulfide-deficient analogue displayed IC 50 values of 6 and 33 nM at rat and human α9α10 nAChRs, respectively, representing less than a 2-fold increase compared with bead GeXIVA. The disulfide-deficient analogs and parent peptides also do not have a well-defined structure according to NMR spectroscopy. Molecular simulations suggest that the disulfide bonds and termini of GeXIVA do not establish stable interactions with the receptor. Overall, this study proposes that the structure of the analgesic peptide GeXIVA could be simplified through disulfide bond deletions and potentially termini truncations.

Disulfide-rich peptides are a class of molecules for which NMR spectroscopy has been the primary tool for structural characterization. Here, we explore whether the process can be achieved by using structural information encoded in chemical shifts. We examine (i) a representative set of five cyclic disulfide-rich peptides that have high-resolution NMR and X-ray structures and (ii) a larger set of 100 disulfide-rich peptides from the PDB. Accuracy of the calculated structures was dependent on the methods used for searching through conformational space and for identifying native conformations. Although Hα chemical shifts could be predicted reasonably well using SHIFTX, agreement between predicted and experimental chemical shifts was sufficient for identifying native conformations for only some peptides in the representative set. Combining chemical shift data with the secondary structure information and potential energy calculations improved the ability to identify native conformations. Additional use of sparse distance restraints or homology information to restrict the search space also improved the resolution of the calculated structures. This study demonstrates that abbreviated methods have potential for elucidation of peptide structures to high resolution and further optimization of these methods, e.g., improvement in chemical shift prediction accuracy, will likely help transition these methods into the mainstream of disulfide-rich peptide structural biology.

Sortase A (SrtA) is an enzyme obtained from Staphylococcus aureus that catalyzes site-specific transpeptidation of surface proteins to the bacterial cell membrane. SrtA recognizes an LPXTG amino acid motif and cleaves between the Thr and Gly to form a thioester-linked acyl-enzyme intermediate. The intermediate is resolved in the presence of a nucleophilic N-terminal polyglycine resulting in ligation of the acyl donor to the polyglycine acceptor. Here we describe the application of SrtA as a tool for the cyclization of disulfide-rich peptides. Reactions are typically tailored to each disulfide-rich peptide with optimal conditions producing yields of 40-50% cyclized peptide.

Bioactive peptides have potential as drug leads, but turning them into drugs is a challenge because of their typically poor metabolic stability. Molecular grafting is one approach to stabilizing and constraining peptides and involves melding a bioactive peptide sequence onto a suitable molecular scaffold. This method has the benefit of improving the stability of the bioactive peptide lead and potentially expanding its functionality. Here we step through the molecular grafting process and describe its successes and limitations. So far, molecular grafting has been successfully used to improve the stability of peptide drug leads, to enhance conformational rigidity, to facilitate delivery to intracellular targets, and in some cases to increase efficacy in oral administration. Although applications of molecular grafting have focused mainly on therapeutic applications, including those for pain, metabolic disease, and cancer, its potential uses are much broader, and we hope this Perspective will inspire wider applications of this molecular design tool in biotechnology.

Cyclic α-conotoxin Vc1.1 (cVc1.1) is an orally active peptide with analgesic activity in rat models of neuropathic pain. It has two disulfide bonds, which can have three different connectivities, one of which is the native and active form. In this study we used computational modeling and nuclear magnetic resonance to design a disulfide-deleted mutant of cVc1.1, [C2H,C8F]cVc1.1, which has a larger hydrophobic core than cVc1.1 and, potentially, additional surface salt bridge interactions. The new variant, hcVc1.1, has similar structure and serum stability to cVc1.1 and is highly stable at a wide range of pH and temperatures. Remarkably, hcVc1.1 also has similar selectivity to cVc1.1, as it inhibited recombinant human α9α10 nicotinic acetylcholine receptor-mediated currents with an IC50 of 13 μM and rat N-type (Cav2.2) and recombinant human Cav2.3 calcium channels via GABAB receptor activation, with an IC50 of ~900 pM. Compared to cVc1.1, the potency of hcVc1.1 is reduced three-fold at both analgesic targets, whereas previous attempts to replace Vc1.1 disulfide bonds by non-reducible dicarba linkages resulted in at least 30-fold decreased activity. Because it has only one disulfide bond, hcVc1.1 is not subject to disulfide bond shuffling and does not form multiple isomers during peptide synthesis.

Peptides are emerging as a new class of therapeutics due to their high potency and specificity for a range of targets, including the inhibition of protein-protein interactions. Disulfide-rich cyclic peptides, in particular, have attracted much attention in drug design due to their ultra-stable structure. Moreover, some of them have been shown to internalize into cells, which makes them potential scaffolds to deliver pharmaceutically bioactive sequences to intracellular targets. Here we examined the effects of structural modifications on the cell-penetrating properties of two disulfide-rich cyclic cell-penetrating peptides, Momordica cochinchinensis trypsin inhibitor II (MCoTI-II) and sunflower trypsin inhibitor-1 (SFTI-1). We found that the cellular uptake of MCoTI-II can be improved by increasing the overall positive charge of the native sequence. On the other hand, mutations to SFTI-1 did not significantly influence its cellular uptake, suggesting a non-specific endocytosis-dependent mechanism of cellular uptake. This study provides an understanding of the structural features affecting the internalization of MCoTI-II and SFTI-1, and hence provides a guide for the development of these disulfide-rich cyclic scaffolds into potential drug leads., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

Cyclic disulfide-rich peptides have exceptional stability and are promising frameworks for drug design. We were interested in obtaining X-ray structures of these peptides to assist in drug design applications, but disulfide-rich peptides can be notoriously difficult to crystallize. To overcome this limitation, we chemically synthesized the L- and D-forms of three prototypic cyclic disulfide-rich peptides: SFTI-1 (14-mer with one disulfide bond), cVc1.1 (22-mer with two disulfide bonds), and kB1 (29-mer with three disulfide bonds) for racemic crystallization studies. Facile crystal formation occurred from a racemic mixture of each peptide, giving structures solved at resolutions from 1.25 Å to 1.9 Å. Additionally, we obtained the quasi-racemic structures of two mutants of kB1, [G6A]kB1, and [V25A]kB1, which were solved at a resolution of 1.25 Å and 2.3 Å, respectively. The racemic crystallography approach appears to have broad utility in the structural biology of cyclic peptides., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Chlorotoxin is a small scorpion peptide that inhibits glioma cell migration. We investigated the importance of a major component of chlorotoxin's chemical structure - four disulfide bonds - to its tertiary structure and biological function., Results: Five disulfide bond analogs of chlorotoxin were synthesized, with l-α-aminobutyric acid residues replacing each or all of the disulfide bonds. Chemical oxidation and circular dichroism experiments revealed that Cys III-VII and Cys V-VIII were essential for native structure formation. Cys I-IV and Cys II-VI were important for stability of enzymatic proteolysis but not for the inhibition of human umbilical vein endothelial cell migration., Conclusion: The disulfide bonds of chlorotoxin are important for its structure and stability and have a minor role in its activity against cell migration.

Disulfide-rich cyclic peptides have exciting potential as leads or frameworks in drug discovery; however, their use is faced with some synthetic challenges, mainly associated with construction of the circular backbone and formation of the correct disulfides. Here we describe a simple and efficient Fmoc solid-phase peptide synthesis (SPPS)-based method for synthesizing disulfide-rich cyclic peptides. This approach involves SPPS on 2-chlorotrityl resin, cyclization of the partially protected peptide in solution, cleavage of the side-chain protecting groups, and oxidization of cysteines to yield the desired product. We illustrate this method with the synthesis of peptides from three different classes of cyclic cystine knot motif-containing cyclotides: Möbius (M), trypsin inhibitor (T), and bracelet (B). We show that the method is broadly applicable to peptide engineering, illustrated by the synthesis of two mutants and three grafted analogues of kalata B1. The method reduces the use of highly caustic and toxic reagents and is better suited for high-throughput synthesis than previously reported methods for producing disulfide-rich cyclic peptides, thus offering great potential to facilitate pharmaceutical optimization of these scaffolds.

Recently disulfide-rich head-to-tail cyclic peptides have attracted the interest of medicinal chemists owing to their exceptional thermal, chemical and enzymatic stability brought about by their constrained structures. Here we review current trends in the field of peptide-based pharmaceuticals and describe naturally occurring cyclic disulfide-rich peptide scaffolds, discussing their pharmaceutically attractive properties and benefits. We describe how we can utilise these stable frameworks to graft and/or engineer pharmaceutically interesting epitopes to increase their selectivity and bioactivity, opening up new possibilities for addressing 'difficult' pharmaceutical targets., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

Cyclotides and conotoxins are two classes of disulfide-rich peptides that occur in plants and animals respectively and are the major focus of study in our laboratory. In the last three years there has been significant progress in studies of these two classes of compounds and in this article we provide an overview of the findings from our laboratory in this period. Highlights include the discovery of cyclotides in the Fabaceae and Solanaceae plant families, members of which are widely used in human nutrition, and the discovery of new classes of cyclotide precursors. These discoveries confirm the widespread distribution of cyclotides in the plant kingdom and the diversity of precursor proteins involved in their biosynthesis. Other studies have delineated the mode of action of naturally occurring cyclotides and have demonstrated the versatility of synthetic cyclotides as stable protein engineering frameworks, with applications in drug design. Conotoxins continue to be a rich source of inspiration for drug design programs, and we summarize here a range of recent studies from our laboratory focusing on the development of novel synthetic strategies and the delineation of structure-activity relationships. A major highlight was the development of an orally active cyclized conotoxin derivative that is highly efficacious in a rat model of neuropathic pain. Overall the studies described herein provide much encouragement for continuing efforts to develop peptides as drugs.

Conotoxins are bioactive peptides from the venoms of marine snails and have been divided into several superfamilies based on homologies in their precursor sequences. The M-superfamily conotoxins can be further divided into five branches based on the number of residues in the third loop of the peptide sequence. Recently two M-1 branch conotoxins (tx3a and mr3e) with a C1-C5, C2-C4, C3-C6 disulfide connectivity and one M-2 branch conotoxin (mr3a) with a C1-C6, C2-C4, C3-C5 disulfide connectivity were described. Here we report the disulfide connectivity, chemical synthesis and the three-dimensional NMR structure of the novel 14-residue conotoxin BtIIIA, extracted from the venom of Conus betulinus. It has the same disulfide connectivity as mr3a, which puts it in the M-2 branch conotoxins but has a distinctly different structure from other M-2 branch conotoxins. 105 NOE distance restraints and seven dihedral angle restraints were used for the structure calculations. The three-dimensional structure was determined with CYANA based on torsion angle dynamics and refinement in a water solvent box was carried out with CNS. Fifty structures were calculated and the 20 lowest energy structures superimposed with a RMSD of 0.49±0.16 Å. Even though it has the M-2 branch disulfide connectivity, BtIIIA was found to have a 'flying bird' backbone motif depiction that is found in the M-1 branch conotoxin mr3e. This study shows that conotoxins with the same cysteine framework can have different disulfide connectivities and different peptide folds., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In this chapter we describe two SPPS approaches for producing cyclic disulfide-rich peptides in our laboratory, including cyclotides from plants, cyclic conotoxins from cone snail venoms, chlorotoxin from scorpion venom, and the sunflower trypsin inhibitor peptide, SFTI-1.

Cyclic peptides typically have much higher stability and improved biopharmaceutical properties over their linear counterparts. Our work focuses on the discovery of naturally occurring disulfide-rich cyclic peptides and their applications in drug design. These peptides provide a design basis for re-engineering natural acyclic peptides to improve their biopharmaceutical properties by chemically linking their termini. Here we describe examples of the discovery of the cyclotide family of peptides, their chemical re-engineering to introduce desired pharmaceutical activities, studies of their biopharmaceutical properties and applications of cyclization technologies to naturally occurring toxins, including conotoxins and scorpion toxins. In the case of the conotoxin Vc1.1, we produced an orally active peptide with potential for the treatment of neuropathic pain by cyclising the native peptide. In the case of the scorpion toxin chlorotoxin, a cyclised derivative had improved biopharmaceutical properties as a tumour imaging agent over the naturally occurring linear chlorotoxin. Ongoing chemical and structural studies of these classes of disulfide-rich peptides promise to increase their value for use in dissecting biological processes in plants and mammals while also providing leads to new classes of biopharmaceuticals.

Cyclic disulfide-rich peptides ranging in size from ∼14 to 29 amino acids have been found in a wide variety of organisms and have exciting biological and medicinal applications due to their stability and structure. Many of these peptides can be chemically synthesized, but their small size and limited number of chromophore-containing amino acids make them difficult to quantify by methods routinely used for large proteins. A comparison of the precision and accuracy of gravimetric, UV- and NMR-based methods in current use for the quantification of small peptides is presented for a representative set of cyclic disulfide-rich peptides. The study shows that gravimetric and UV absorbance methods should be used with caution for small peptides and all methods should be carefully validated. For the routine quantification of small disulfide-rich peptides, we recommend comparison of the analytical reverse-phase high-performance liquid chromatography trace or UV absorbance at 214 nm with that of a standard peptide solution quantified by amino acid analysis. An accurate quantification method that is simple and cost effective will assist in comparison of inhibition and activity data between different laboratories and peptides and correct calculation of synthesis yields., (Copyright © 2012 Wiley Periodicals, Inc.)

Fragments from the extracellular matrix proteins laminin and osteopontin and a sequence from VEGF have potent proangiogenic activity despite their small size (< 10 residues). However, these linear peptides have limited potential as drug candidates for therapeutic angiogenesis because of their poor stability. In the present study, we show that the therapeutic potential of these peptides can be significantly improved by "grafting" them into cyclic peptide scaffolds. Momordica cochinchinensis trypsin inhibitor-II (MCoTI-II) and sunflower trypsin inhibitor-1 (SFTI-1), naturally occurring, plant-derived cyclic peptides of 34 and 14 residues, respectively, were used as scaffolds in this study. Using this approach, we have designed a peptide that, in contrast to the small peptide fragments, is stable in human serum and at nanomolar concentration induces angiogenesis in vivo. This is the first report of using these scaffolds to improve the activity and stability of angiogenic peptide sequences and is a promising approach for promoting angiogenesis for therapeutic uses.

The articles in this forum issue describe various aspects of the folding of disulfide-rich proteins. They include review articles using proteins such as bovine pancreatic trypsin inhibitor as models to highlight the range of folding pathways seen in disulfide-rich proteins, along with a detailed analysis of the methods used to study them. Following two comprehensive reviews on the methods and applications of protein folding, three original articles in this issue focus on two specific classes of disulfide-rich proteins that have applications in drug design and development, namely cyclotides and conotoxins. Cyclotides are head-to-tail cyclic and disulfide-rich proteins from plants and function as a defense against insect attack. Conotoxins are the disulfide-rich components of the venom of marine cone snails that is used to capture prey. These research articles report on factors that modulate protein folding pathways in these molecules and determine the outcomes of protein folding, that is, yield and heterogeneity of products. Finally, the issue concludes with a comprehensive review on a different type of disulfide bond, namely those that have a functional rather than structural role in proteins, with a particular focus on allosteric disulfide bonds that modify protein function.

α-Conotoxins are peptides isolated from the venom ducts of cone snails that target nicotinic acetylcholine receptors (nAChRs). They are valuable pharmacological tools and have potential applications for treating a range of conditions in humans, including pain. However, like all peptides, conotoxins are susceptible to degradation, and to enhance their therapeutic potential it is important to elucidate the factors contributing to instability and to develop approaches for improving stability. AuIB is a unique member of the α-conotoxin family because the nonnative "ribbon" disulfide isomer exhibits enhanced activity at the nAChR in rat parasympathetic neurons compared with the native "globular" isomer. Here we show that the ribbon isomer of AuIB is also more resistant to disulfide scrambling, despite having a nonnative connectivity and flexible structure. This resistance to disulfide scrambling does not correlate with overall stability in serum because the ribbon isomer is degraded in human serum more rapidly than the globular isomer. Cyclization via the joining of the N- and C-termini with peptide linkers of four to seven amino acids prevented degradation of the ribbon isomer in serum and stabilized the globular isomers to disulfide scrambling. The linker length used for cyclization strongly affected the relative proportions of the disulfide isomers produced by oxidative folding. Overall, the results of this study provide important insights into factors influencing the stability and oxidative folding of α-conotoxin AuIB and might be valuable in the design of more stable antagonists of nAChRs.

Cyclotides are ultrastable plant proteins characterized by the presence of a cyclic amide backbone and three disulfide bonds that form a cystine knot. Because of their extreme stability, there has been significant interest in developing these molecules as a drug design scaffold. For this potential to be realized, efficient methods for the synthesis and oxidative folding of cyclotides need to be developed, yet we currently have only a basic understanding of the folding mechanism and the factors influencing this process. In this study, we determine the major factors influencing oxidative folding of the different subfamilies of cyclotides. The folding of all the cyclotides examined was heavily influenced by the concentration of redox reagents, with the folding rate and final yield of the native isomer greatly enhanced by high concentrations of oxidized glutathione. Addition of hydrophobic solvents to the buffer also enhanced the folding rates and appeared to alter the folding pathway. Significant deamidation and isoaspartate formation were seen when oxidation conditions were conducive to slow folding. The identification of factors that influence the folding and degradation pathways of cyclotides will facilitate the development of folding screens and optimized conditions for producing cyclotides and grafted analogs as stable peptide-based therapeutics.

alpha-Conotoxins are multiple disulfide bond containing peptides that are isolated from venomous marine cone snails. They display remarkable selectivity for different subtypes of nicotinic acetylcholine receptors (nAChRs). While alpha-conotoxins display poor resistance to in vivo degradation by proteases, which limits their use as drug leads, N-to-C cyclization via an oligopeptide spacer unit has been previously shown to improve stability. However, the effect of N-to-C cyclization on the formation of the disulfide bond framework is not fully understood. Four N-to-C cyclic analogs of alpha-conotoxin ImI; cImI-A, cImI-betaA, cImI-AG, and cImI-AGG were synthesized to evaluate the effect of oligopeptide spacer length on disulfide bond selectivity and stability to proteolysis. Different ratios of disulfide bond isomers were obtained for each analog using a nonselective random disulfide bond forming strategy, which was dependent on the length of the spacer. To identify each isomer obtained using the random strategy, and to gain access to disulfide bond isomers otherwise unattainable using the random strategy, both the native (globular) and ribbon isomers were synthesized in good yield and purity using a selective orthogonal cysteine protecting group strategy. As such, a random oxidation strategy showed a clear preference for the ribbon isomer in cImI-A. The cyclic globular isomers showed a high resistance to enzymatic degradation compared to the ribbon isomers, with the cImI-A and cImI-AG globular isomers demonstrating the highest stability. These results suggest that cyclization can improve the biochemical stability of conotoxins with potential applications in the development of drugs., ((c) 2010 Wiley Periodicals, Inc.)

The fold of small disulfide-rich proteins largely relies on two or more disulfide bridges that are main components of the hydrophobic core. Because of the small size of these proteins and their high cystine content, the cysteine connectivity has been difficult to ascertain in some cases, leading to uncertainties and debates in the literature. Here, we use molecular dynamics simulations and MM-PBSA free energy calculations to compare similar folds with different disulfide pairings in two disulfide-rich miniprotein families, namely the knottins and the short-chain scorpion toxins, for which the connectivity has been discussed. We first show that the MM-PBSA approach is able to discriminate the correct knotted topology of knottins from the laddered one. Interestingly, a comparison of the free energy components for kalata B1 and MCoTI-II suggests that cyclotides and squash inhibitors, although sharing the same scaffold, are stabilized through different interactions. Application to short-chain scorpion toxins suggests that the conventional cysteine pairing found in many homologous toxins is significantly more stable than the unconventional pairing reported for maurotoxin and for spinoxin. This would mean that native maurotoxin and spinoxin are not at the lowest free energy minimum and might result from kinetically rather than thermodynamically driven oxidative folding processes. For both knottins and toxins, the correct or conventional disulfide connectivities provide lower flexibilities and smaller deviations from the initial conformations. Overall, our work suggests that molecular dynamics simulations and the MM-PBSA approach to estimate free energies are useful tools to analyze and compare disulfide bridge connectivities in miniproteins.

Background: Alpha-conotoxins have exciting therapeutic potential based on their high selectivity and affinity for nicotinic acetylcholine receptors. The spacing between the cysteine residues in alpha-conotoxins is variable, leading to the classification of sub-families. BuIA is the only alpha-conotoxin containing a 4/4 cysteine spacing and thus it is of significant interest to examine the structure of this conotoxin., Results: In the current study we show the native globular disulfide connectivity of BuIA displays multiple conformations in solution whereas the non-native ribbon isomer has a single well-defined conformation. Despite having multiple conformations in solution the globular form of BuIA displays activity at the nicotinic acetylcholine receptor, contrasting with the lack of activity of the structurally well-defined ribbon isomer., Conclusion: These findings are opposite to the general trends observed for alpha-conotoxins where the native isomers have well-defined structures and the ribbon isomers are generally disordered. This study thus highlights the influence of the disulfide connectivity of BuIA on the dynamics of the three-dimensional structure.

The aim of this work was to elucidate the oxidative folding mechanism of the macrocyclic cystine knot protein MCoTI-II. We aimed to investigate how the six-cysteine residues distributed on the circular backbone of the reduced unfolded peptide recognize their correct partner and join up to form a complex cystine-knotted topology. To answer this question, we studied the oxidative folding of the naturally occurring peptide using a range of spectroscopic methods. For both oxidative folding and reductive unfolding, the same disulfide intermediate species was prevalent and was characterized to be a native-like two-disulfide intermediate in which the Cys1-Cys18 disulfide bond was absent. Overall, the folding pathway of this head-to-tail cyclized protein was found to be similar to that of linear cystine knot proteins from the squash family of trypsin inhibitors. However, the pathway differs in an important way from that of the cyclotide kalata B1, in that the equivalent two-disulfide intermediate in that case is not a direct precursor of the native protein. The size of the embedded ring within the cystine knot motif appears to play a crucial role in the folding pathway. Larger rings contribute to the independence of disulfides and favor an on-pathway native-like intermediate that has a smaller energy barrier to cross to form the native fold. The fact that macrocyclic proteins are readily able to fold to a complex knotted structure in vitro in the absence of chaperones makes them suitable as protein engineering scaffolds that have remarkable stability.

SFTI-1 is a novel 14 amino acid peptide comprised of a circular backbone constrained by three proline residues, a hydrogen-bond network, and a single disulfide bond. It is the smallest and most potent known Bowman-Birk trypsin inhibitor and the only one with a cyclic peptidic backbone. The solution structure of [ABA(3,11)]SFTI-1, a disulfide-deficient analogue of SFTI-1, has been determined by (1)H NMR spectroscopy. The lowest energy structures of native SFTI-1 and [ABA(3,11)]SFTI-1 are similar and superimpose with a root-mean-square deviation over the backbone and heavy atoms of 0.26 +/- 0.09 and 1.10 +/- 0.22 A, respectively. The disulfide bridge in SFTI-1 was found to be a minor determinant for the overall structure, but its removal resulted in a slightly weakened hydrogen-bonding network. To further investigate the role of the disulfide bridge, NMR chemical shifts for the backbone H(alpha) protons of two disulfide-deficient linear analogues of SFTI-1, [ABA(3,11)]SFTI-1[6,5] and [ABA(3,11)]SFTI-1[1,14] were measured. These correspond to analogues of the cleavage product of SFTI-1 and a putative biosynthetic precursor, respectively. In contrast with the cyclic peptide, it was found that the disulfide bridge is essential for maintaining the structure of these open-chain analogues. Overall, the hydrogen-bond network appears to be a crucial determinant of the structure of SFTI-1 analogues.

The structure of a novel plant defensin isolated from the flowers of Petunia hybrida has been determined by (1)H NMR spectroscopy. P. hybrida defensin 1 (PhD1) is a basic, cysteine-rich, antifungal protein of 47 residues and is the first example of a new subclass of plant defensins with five disulfide bonds whose structure has been determined. PhD1 has the fold of the cysteine-stabilized alphabeta motif, consisting of an alpha-helix and a triple-stranded antiparallel beta-sheet, except that it contains a fifth disulfide bond from the first loop to the alpha-helix. The additional disulfide bond is accommodated in PhD1 without any alteration of its tertiary structure with respect to other plant defensins. Comparison of its structure with those of classic, four-disulfide defensins has allowed us to identify a previously unrecognized hydrogen bond network that is integral to structure stabilization in the family.

alpha-Conotoxin AuIB and a disulfide bond variant of AuIB have been synthesized to determine the role of disulfide bond connectivity on structure and activity. Both of these peptides contain the 15 amino acid sequence GCCSYPPCFATNPDC, with the globular (native) isomer having the disulfide connectivity Cys(2-8 and 3-15) and the ribbon isomer having the disulfide connectivity Cys(2-15 and 3-8). The solution structures of the peptides were determined by NMR spectroscopy, and their ability to block the nicotinic acetylcholine receptors on dissociated neurons of the rat parasympathetic ganglia was examined. The ribbon disulfide isomer, although having a less well defined structure, is surprisingly found to have approximately 10 times greater potency than the native peptide. To our knowledge this is the first demonstration of a non-native disulfide bond isomer of a conotoxin exhibiting greater biological activity than the native isomer.

The primary sequence and three-dimensional structure of a novel peptide toxin isolated from the Australian funnel-web spider Hadronyche infensa sp. is reported. ACTX-Hi:OB4219 contains 38 amino acids, including eight-cysteine residues that form four disulfide bonds. The connectivities of these disulfide bonds were previously unknown but have been unambiguously determined in this study. Three of these disulfide bonds are arranged in an inhibitor cystine-knot (ICK) motif, which is observed in a range of other disulfide-rich peptide toxins. The motif incorporates an embedded ring in the structure formed by two of the disulfides and their connecting backbone segments penetrated by a third disulfide bond. Using NMR spectroscopy, we determined that despite the isolation of a single native homologous product by RP-HPLC, ACTX-Hi:OB4219 possesses two equally populated conformers in solution. These two conformers were determined to arise from cis/trans isomerization of the bond preceding Pro30. Full assignment of the NMR spectra for both conformers allowed for the calculation of their structures, revealing the presence of a triple-stranded antiparallel beta sheet consistent with the inhibitor cystine-knot (ICK) motif.

Ruthenium‐catalysed azide–alkyne cycloaddition (RuAAC) provides access to 1,5‐disubstituted 1,2,3‐triazole motifs in peptide engineering applications. However, investigation of this motif as a disulfide mimetic in cyclic peptides has been limited, and the structural consequences remain to be studied. We report synthetic strategies to install various triazole linkages into cyclic peptides through backbone cyclisation and RuAAC cross‐linking reactions. These linkages were evaluated in four serine protease inhibitors based on sunflower trypsin inhibitor‐1. NMR and X‐ray crystallography revealed exceptional consensus of bridging distance and backbone conformations (RMSD<0.5 Å) of the triazole linkages compared to the parent disulfide molecules. The triazole‐bridged peptides also displayed superior half‐lives in liver S9 stability assays compared to disulfide‐bridged peptides. This work establishes a foundation for the application of 1,5‐disubstituted 1,2,3‐triazoles as disulfide mimetics. [ABSTRACT FROM AUTHOR]

Conotoxins are disulfide-rich peptides found in the venoms of marine snails of the genus Conus. They have attracted great attention from the pharmaceutical industry because of their potential uses as drug leads, but like most peptides, conotoxins are susceptible to proteolysis and typically are not orally bioavailable. Here we discuss approaches that have been used to stabilise conotoxins to improve their potential pharmaceutical use. Specifically, we focus on the use of backbone cyclisation to improve their stability in biological fluids. The Microreview provides an introduction to the various classes of conotoxins, including their frameworks (cysteine patterns) and a background on the receptors that they interact with, as well as an analysis of the binding interactions between conotoxins and their receptors. [ABSTRACT FROM AUTHOR]

Tumour formation is dependent on nutrient and oxygen supply from adjacent blood vessels. Angiogenesis inhibitors can play a vital role in controlling blood vessel formation and consequently tumour progression by inhibiting endothelial cell proliferation, sprouting and migration. The primary aim of the present study was to design cyclic thrombospondin- 1 (TSP-1) mimetics using disulfide-rich frameworks for anti-angiogenesis therapies and to determine whether these peptides have better potency than the linear parent peptide. A short anti-angiogenic heptapeptide fragment from TSP- 1 (GVITRIR) was incorporated into two cyclic disulfide-rich frameworks, namely MCoTI-II (Momordica cochinchinensis trypsin inhibitor-II) and SFTI-1 (sunflower trypsin inhibitor-1). The cyclic peptides were chemically synthesized and folded in oxidation buffers, before being tested in a series of in vitro evaluations. Incorporation of the bioactive heptapeptide fragment into the cyclic frameworks resulted in peptides that inhibited microvascular endothelial cell migration, and had no toxicity against normal primary human endothelial cells or cancer cells. Importantly, all of the designed cyclic TSP-1 mimetics were far more stable than the linear heptapeptide in human serum. The present study has demonstrated a novel approach to stabilize the active region of TSP-1. The anti-angiogenic activity of the native TSP-1 active fragment was maintained in the new TSP-1 mimetics and the results provide a new chemical approach for the design of TSP-1 mimetics. [ABSTRACT FROM AUTHOR]

Cyclotides are bioactive peptides from plants that are characterized by their head-to-tail cyclic backbone and knotted arrangement of their three conserved disulfide bonds. Their natural function is thought to be as host defense agents and a single plant can express dozens to hundreds of cyclotides. This article provides a brief overview of the history of the discovery of cyclotides and their applications in drug design and agriculture, the former based on their stability as a peptide scaffold and the latter based on their activity against crop pests. More than 300 papers have been published on cyclotides and they represent a promising field of biotechnological research. [ABSTRACT FROM AUTHOR]

Cell penetrating peptides have been regarded as promising vectors to deliver hydrophilic molecules inside cells. Although they are great tools for research and have high potential as drug delivery systems, their application as drugs is impaired by their low stability in serum. Cyclotides, cyclic disulfide-rich peptides from plants, are ultra-stable molecules that have inspired applications in drug design as they can be used as scaffolds to stabilize linear bioactive sequences. Recently, they have also been shown to possess cell-penetrating properties. The combination of their remarkable stability and cell-penetrating properties opens new avenues for the application of peptides to bind to and inhibit intracellular proteins. Nevertheless, for a broader application of these molecules as vectors is of utmost importance to improve their cellular internalization efficiency. In this study we successfully modified MCoTI-II, one of the most widely studied cyclotide scaffolds in drug design, and improved its internalization properties. The internalization of the newly designed MCoTI-II is as efficient as the gold standard cell-penetrating peptide (CP [ABSTRACT FROM AUTHOR]

Cyclic disulfide-rich peptides have exceptional stability and are promising frameworks for drug design. We were interested in obtaining X-ray structures of these peptides to assist in drug design applications, but disulfide-rich peptides can be notoriously difficult to crystallize. To overcome this limitation, we chemically synthesized the L- and D-forms of three prototypic cyclic disulfide-rich peptides: SFTI-1 (14-mer with one disulfide bond), cVc1.1 (22-mer with two disulfide bonds), and kB1 (29-mer with three disulfide bonds) for racemic crystallization studies. Facile crystal formation occurred from a racemic mixture of each peptide, giving structures solved at resolutions from 1.25 Å to 1.9 Å. Additionally, we obtained the quasi-racemic structures of two mutants of kB1, [G6A]kB1, and [V25A]kB1, which were solved at a resolution of 1.25 Å and 2.3 Å, respectively. The racemic crystallography approach appears to have broad utility in the structural biology of cyclic peptides. [ABSTRACT FROM AUTHOR]

Cyclotides are plant mini-proteins whose natural function is thought to be to protect plants from pest or pathogens, particularly insect pests. They are approximately 30 amino acids in size and are characterized by a cyclic peptide backbone and a cystine knot arrangement of three conserved disulfide bonds. This article provides an overview of the reported pesticidal or toxic activities of cyclotides, discusses a possible common mechanism of action involving disruption of biological membranes in pest species, and describes methods that can be used to produce cyclotides for potential applications as novel pesticidal agents. [ABSTRACT FROM AUTHOR]

The article discusses the role of cysteine, which is one of the proteinogenic amino acids, in the formation of disulfide crosslinks which help to stabilize the folded structure of proteins. It states that the substitution of cysteine with selenocysteine in the unfolded protein can autocatalyse the desired crosslinks formation. It says that the overall folding process for cysteine-containing proteins involves conformational and oxidative folding. It adds that selenium can be replaced into cysteine without perturbation of the structures of disulfide-rich peptides.

Innentitelbild: Application and Structural Analysis of Triazole-Bridged Disulfide Mimetics in Cyclic Peptides (Angew. Keywords: disulfide mimetics; inhibitors; peptides; peptidomimetics; triazole bridges EN disulfide mimetics inhibitors peptides peptidomimetics triazole bridges 11258 11258 1 07/03/20 20200706 NES 200706 B 1,5-Disubstituierte 1,2,3-Triazole b können als Mimetika von Disulfidbindungen genutzt werden. Disulfide mimetics, inhibitors, peptides, peptidomimetics, triazole bridges. [Extracted from the article]

Review: 31 refs. [ABSTRACT FROM AUTHOR]

Among the various molecules that plants produce for defense against pests and pathogens, cyclotides stand out as exceptionally stable and structurally unique. These ribosomally synthesized peptides are around 30 amino acids in size, and are stabilized by a head-to-tail cyclic peptide backbone and three disulfide bonds that form a cystine knot. They occur in certain plants of the Rubiaceae, Violaceae, Cucurbitaceae, Fabaceae, and Solanaceae families, with an individual plant producing up to hundreds of different cyclotides. Aside from being exploitable as crop protection agents based on their natural pesticidal activities, cyclotides are amenable to repurposing by chemists for use as drug leads or as tools in chemical biology. Their macrocyclic peptide backbone and knotted arrangement of three disulfide bonds engenders cyclotides with resistance to proteolytic degradation, high temperatures, and chemical chaotropes. Furthermore, their small size makes them accessible to synthesis using solid-phase peptide chemistry and so non-natural cyclotides can be designed and synthesized for a variety of applications. Our focus here is on cyclotides as tools in chemical biology, and there are four main areas of application that have appeared in the literature so far: (i) cyclotides as probes of membrane binding; (ii) cyclotides as probes of biosynthetic pathways for peptide cyclization; (iii) cyclotides as probes of protease specificity and function; and (iv) cyclotides as probes of receptor binding and specificity, with the potential for them to be developed as drug leads. The main methods used in these studies include solid-phase peptide chemistry for synthesis and NMR spectroscopy for structural characterization, as well as a wide range of biochemical and biophysical techniques for probing intermolecular interactions. In addition, cyclotides have been examined in diverse biological assays, ranging from enzyme inhibition to cell penetration, intracellular targeting and cytotoxicity. The main finding to have emerged from studies over the past decade is that cyclotides are exceptionally stable under a variety of conditions (in assay buffers, biological fluids, membranes, and recombinant expression systems). Furthermore, they are structurally very well-defined and amenable to sequence substitutions that can introduce new desired biological activities, generally without compromising their exceptional stability. Both features contribute to their use as peptide-based frameworks in drug design. Finally, they occupy a size niche between traditional small-molecule drugs (<500 Da in molecular weight) and protein-based biologics (>5000 Da) and thus can probe receptors, membranes, and protein-protein interactions in different ways to what is possible with either small molecules or biologics. Overall, cyclotides are an exciting class of peptides that have great potential as ultrastable chemical biology probes in a variety of applications. They have the advantage of specificity (typical of proteins) combined with the synthetic accessibility of small molecules. [ABSTRACT FROM AUTHOR]

Conotoxin GeXIVA inhibits the α9α10 nicotinic acetylcholine receptor (nAChR) and is analgesic in animal models of pain. α-Conotoxins have four cysteines that can have three possible disulfide connectivities: globular (CysI-CysIII and CysII-CysIV), ribbon (CysI-CysIV and CysII-CysIII), or bead (CysI-CysII and CysIII-CysIV). Native α-conotoxins preferably adopt the globular connectivity, and previous studies of α-conotoxins have focused on the globular isomers as the ribbon and bead isomers typically have lower potency at nAChRs than the globular form. A recent report showed that the bead and ribbon isomers of GeXIVA are more potent than the globular isomer, with low nanomolar half-maximal inhibitory concentrations (IC50). Despite this high potency, the therapeutic potential of GeXIVA is limited, because like most peptides, it is susceptible to proteolytic degradation and is challenging to synthesize in high yield. Here we used backbone cyclization as a strategy to improve the folding yield as well as increase the serum stability of ribbon GeXIVA while preserving activity at the α9α10 nAChR. Specifically, cyclization of ribbon GeXIVA with a two-residue linker maintained the biological activity at the human α9α10 nAChR and improved stability in human serum. Short linkers led to selective formation of the ribbon disulfide isomer without requiring orthogonal protection. Overall, this study highlights the value of backbone cyclization in directing folding, improving yields, and stabilizing conotoxins with therapeutic potential. [ABSTRACT FROM AUTHOR]

Disulfide-rich macrocyclic peptides are emerging as versatile scaffolds for the development of stable biochemical tools. This potential is due to the combination of their structural stability and range of bioactivities. Here, we explored the activity of these peptides on fibril growth of the hexapeptide Ac-VQIVYK-NH2 (AcPHF6), which is a tau-derived peptide that has been widely used to understand the pathological mechanism of numerous tauopathies, including Alzheimer's disease. Of the cyclic peptides tested, SFTI-1 and kB1 showed an inherent ability to inhibit AcPHF6 fibril formation. Using an end-capping strategy and combining it with a molecular grafting approach, we demonstrated that SFTI-1 could be used as a starting point to design more potent fibril inhibitors. We further identified chemical and structural features of SFTI-1 and its analogues that underpin their inhibitory activity. The ability to inhibit fibril growth using the strategy employed herein supports the 'steric zipper' model of AcPHF6 fibril formation and shows that naturally-occurring cyclic peptides have potential as drug leads or molecular probes for understanding fibril formation. [ABSTRACT FROM AUTHOR]

Summary Cyclotides combine the stability of disulfide-rich peptides with the intracellular accessibility of cell-penetrating peptides, giving them outstanding potential as drug scaffolds with an ability to inhibit intracellular protein-protein interactions. To realize and optimize the application of cyclotides as a drug framework and delivery system, we studied the ability of the prototypic cyclotide, kalata B1, to enter mammalian cells. We show that kalata B1 can enter cells via both endocytosis and direct membrane translocation. Both pathways are initiated by targeting phosphatidylethanolamine phospholipids at the cell surface and inducing membrane curvature. This unusual approach to initiate internalization might be harnessed to deliver drugs into cells and, in particular, cancer cells, which present a higher proportion of surface-exposed phosphatidylethanolamine phospholipids. Our findings highlight the potential of these peptides as drug leads for the modulation of traditionally “undruggable” targets, such as intracellular protein-protein interactions. [ABSTRACT FROM AUTHOR]

Peptides are emerging as a new class of therapeutics due to their high potency and specificity for a range of targets, including the inhibition of protein–protein interactions. Disulfide-rich cyclic peptides, in particular, have attracted much attention in drug design due to their ultra-stable structure. Moreover, some of them have been shown to internalize into cells, which makes them potential scaffolds to deliver pharmaceutically bioactive sequences to intracellular targets. Here we examined the effects of structural modifications on the cell-penetrating properties of two disulfide-rich cyclic cell-penetrating peptides, Momordica cochinchinensis trypsin inhibitor II (MCoTI-II) and sunflower trypsin inhibitor-1 (SFTI-1). We found that the cellular uptake of MCoTI-II can be improved by increasing the overall positive charge of the native sequence. On the other hand, mutations to SFTI-1 did not significantly influence its cellular uptake, suggesting a non-specific endocytosis-dependent mechanism of cellular uptake. This study provides an understanding of the structural features affecting the internalization of MCoTI-II and SFTI-1, and hence provides a guide for the development of these disulfide-rich cyclic scaffolds into potential drug leads. [ABSTRACT FROM AUTHOR]