Search

The construction of mobile crane booms requires the usage of ultra‐high strength steels. Micro‐alloying elements promote grain refinement during hot rolling and result in increased toughness. The relevant strength is given through a martensitic microstructure, which is accomplished by elements retarding the γ to α transformation. Direct quenching (DQ) from the rolling heat and quenching after a preceding re‐austenitization (RQ) are two different production routes. They differ regarding their productivity, their achievable strength levels, and their resulting microstructures. In order to explore the influence of the production route in combination with prominent micro‐alloying elements, which come to application during hot‐rolling, six steels with varying content of V and Nb are investigated concerning their different properties after DQ and RQ as well as their behavior after tempering. It is found, that Nb strongly improves the strength after thermomechanical processing in the as‐rolled condition. Furthermore, Nb compensates the loss of strength during tempering. This effect is not thoroughly discussed in literature so far. Although Nb leads to grain refining during re‐austenitization, the effects on the strength of RQ steels are minimal. The effect after tempering is also weaker than after direct quenching. It is also shown, that V offers a high strength potential after tempering, however weakens the impact toughness significantly. [ABSTRACT FROM AUTHOR]