Search

This paper reports interesting differences between physical and mechanical properties of various membranes prepared from high and low molecular weight poly (vinyl alcohol) (PVA) and xanthan gum (XG) blends irradiated under low dose electron beam. The membranes were designed for sustained delivery of diltiazem hydrochloride through skin. Electron beam irradiation produced crosslinks and turned PVA into crystalline phase from its amorphous organization in the unirradiated state. PVA crystals were fibrillar at low XG content (1 wt.%) when the molecular weight was high while similar orientation at higher XG content (5 wt.%) when the molecular weight was low. Low molecular weight PVA-XG membranes showed equivalent physical properties under dry condition but wet-mechanical properties were superior for high molecular weight PVA-XG hybrids. Both of them showed slow and sustained diltiazem release but the later induced slightly slower release despite low drug encapsulation efficiency due to its better wet mechanical strength., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

ABSTRACT Hybrid membranes based on poly(vinyl alcohol) (PVA) of widely different molecular weights and ex situ nanosilica were synthesized and characterized as transdermal delivery device for Diltiazem hydrochloride. Investigations showed that change in PVA molecular weight strongly influenced physico-mechanicals of the hybrids especially at low nanosilica content than at higher levels. As for example at 1 wt %, low molecular weight PVA induced finer dispersion of silica nanoparticles resulting into higher dry state crystallinity and mechanical strength but slightly lower biocompatibility as compared to high molecular weight PVA. Those variations in physico-mechanicals finally affected Diltiazem retention and its elution from those membranes under physiological conditions. Low molecular weight PVA produced highest drug retention as well as slowest yet steady release than both high molecular weight PVA and neat PVA membranes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2076-2086, 2013 [ABSTRACT FROM AUTHOR]

Abstract: Membranes with high strength and elasticity are of great demand in patch therapy. Similar membranes have been developed by combining carboxy-functionalized multiwalled carbon nanotube (c-MWCNT) with different poly(vinyl alcohol) (PVA) as potential diltiazem delivery device through aqueous mixing. High molecular weight PVA (PVAH) produced stronger interaction with c-MWCNT than low molecular weight PVA (PVAL) preferably at low concentration. Positive changes in favor of PVAH in infrared and solid state 13C nuclear magnetic resonance spectroscopy, wide angle X-ray scattering, thermal stability, morphology and dry and wet mechanical properties clearly demonstrate that. Fibrillar c-MWCNT array at 1wt.% in PVAH (PVAH/1) has drastically improved PVA crystalline cell dimension, tensile strength (201%) and elongation (196%) than neat PVAH whereas the similar improvement is much less (100% and 185%) in PVAL (PVAL/1) due to globular morphology. Instead, c-MWCNT performed better at 0.5wt.% in PVAL (PVAL/0.5). The kinetic data reflects better encapsulation and slower release by PVAH (5.87%) than PVAL (10.17%) due to greater interfacial interaction. [Copyright &y& Elsevier]

Interesting correlation between physicomechanical and in vitro release behavior of diltiazem hydrochloride has been obtained in physically treated poly(vinyl alcohol) (PVA) membranes of widely different molecular weights. Physical treatment could not raise crystallinity in dry state, but some of them show significant postswelled crystallinity and achieves elastomeric character. They also retain lot of equilibrium water, ideally suited for drug-impregnated transdermal patches. In effect, low molecular weight PVA and dimethyl sulfoxide-modified high molecular weight PVA membranes have shown acceptable release of diltiazem hydrochloride when compared with thermally treated high molecular weight PVA membrane. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012 [ABSTRACT FROM AUTHOR]