Search

Four novel architectures of wideband five-port single-ended-to-balanced power dividers with broadband common-mode suppression are proposed in this paper. The bandpass filtering capability with/without close-to-passband transmission zeros are also incorporated in some of them to obtain multifunctional single-ended-to-differential-mode filtering/power division operation. Two ideal 180° phase inverters are used to replace the conventional half-wavelength transmission line-based inverters in the basic power divider structure so that wideband common-mode rejection and a smaller circuit size are achieved. Quarter-wavelength transmission lines and coupled-line sections are exploited to simultaneously realize the bandpass filtering and wideband power division functionalities. Each five-port power divider exhibits broadband 3-dB single-ended-to-balanced power division, high in-band input–output power-matching levels, high in-band power isolation levels between the two balanced outputs and wideband common-mode rejection. The theoretical analysis, parametric study, and design procedure for the conceived single-ended-to-differential-mode power dividers are provided. Furthermore, for experimental and demonstration purposes, four microstrip prototypes designed at 1 GHz are manufactured and characterized. [ABSTRACT FROM AUTHOR]

Three novel wideband balanced-to-unbalanced filtering power dividers based on coupled lines are proposed in this paper. Multifunctional power dividers can replace various cascaded single devices to decrease integration mismatching loss and circuit size. The wideband response can be easily realized by the coupled lines structures. To further improve the differential-mode passband selectivity, open/shorted coupled lines and half-wavelength open stubs are applied to introduce two transmission zeros near the passband, respectively. In addition, a resistor in the middle of two single-ended ports can be used to realize isolation between out ports. To verify the proposed concepts, three prototypes of wideband balanced-to-unbalanced filtering power dividers operating at 2 GHz are designed and fabricated with the 4-dB differential-mode bandwidths of 80.5%, 71.5%, and 80%. All the structures show good performances for differential-mode out-of-band suppression, common-mode suppression, and isolation. [ABSTRACT FROM PUBLISHER]

Two novel wideband balanced networks with wideband common mode suppression and arbitrary power-dividing ratio are proposed in this paper. The differential/common mode equivalent circuits of the balanced networks can be easily reduced based on the matrix transformation. Microstrip-slotline 180° phase inverters loaded with four isolation resistors are used to realize high isolation for the power division output ports. Two planar wideband equal and unequal power division balanced networks with bandwidths of 33% of (1:1, equal) and 39% (1:2.22, unequal) for the differential mode and over 120% common mode suppression (0.96–3.6 GHz, |Scc21, 31| < –10 dB) are designed and fabricated. [ABSTRACT FROM AUTHOR]

Two new wideband in-phase and out-of-phase balanced power dividing/combining networks are proposed in this paper. Based on matrix transformation, the differential-mode and common-mode equivalent circuits of the two wideband in-phase and out-of-phase networks can be easily deduced. A patterned ground-plane technique is used to realize the strong coupling of the shorted coupled lines for the differential mode. Two planar wideband in-phase and out-of-phase balanced networks with bandwidths of 55.3% and 64.4% (\vert S{ dd21,31}\vert<4\ {\ {dB}}) for the differential mode with wideband common-mode suppression are designed and fabricated. The theoretical and measured results agree well with each other and show good in-band performances. [ABSTRACT FROM PUBLISHER]