Search

The oxidation rates of diesel soot from the combustion chamber of a running diesel engine were calculated based on the particle size distributions at different crank angles. The primary particle diameter and nanostructure of soot were obtained by means of high-resolution transmission electron microscopy (HRTEM). The soot characteristics were also investigated by oxidative thermogravimetry and Raman scattering spectrometry. The results showed the soot nanostructures were dependent on engine operation conditions and combustion phases. The oxidation rates were found to differ by nearly fourfold from that calculated by the Nagle/Strickland-Constable (NSC) model for the soots studied here. The varied oxidation rates were interpreted in terms of differences in nanostructure between the soots. The experimental results were used to modify the NSC model and the fringe length of in-cylinder diesel soot was chosen to describe the influence of graphitisation on the oxidation of soot. The modified NSC model lessened the deviation between measurements and predictions. [ABSTRACT FROM AUTHOR]

Abstract: The diesel soot was extracted from the chamber of a running diesel engine using a total cylinder sampling system. A structural description and size distribution of the soot spherules were performed by means of high-resolution transmission electron microscopy (HRTEM). HRTEM image analysis was carried out to achieve semi-quantitative information about the soot organization. Different nanostructures were found in dependence upon the engine test conditions. A better organization of the graphitic layers occurred for the in-cylinder soot as the expansion stroke developed. The oxygen concentrations at sampling angles and the cylinder pressure were measured. The oxidation rates of the in-cylinder soot during the late combustion phase were calculated according to the differences of spherules size distributions between two consecutive sampling angles. The soot reactivity in dependence on the nanostructure was shown after deducting the effect of oxygen concentration and temperature. The increase of resistance toward oxidation was associated to the increase of the structural order for the in-cylinder soot. The results are a useful database for testing the structure–property relationship between the nanostructure and the reactivity of the in-cylinder diesel soot. [ABSTRACT FROM AUTHOR]

The present study investigated the effects of adding 20 vol.% biodiesel to petroleum diesel (to produce a mixture termed B20) on the physical properties and reactivity of the resulting exhaust soot particles. Tests were performed at different engine loads of a constant speed, and the soot particles from the combustion of B20 and petroleum diesel fuel (DF) were collected from the engine exhaust stream. Transmission electron microscopy and Raman spectroscopy were employed for the analysis of soot morphology and nanostructure. The thermogravimetric analysis was used to determine the oxidative reactivity of the soot. For both the DF and B20 soot, increased engine loads result in soot aggregates with more compact morphology and primary soot particles with larger size and more organized structure. Compared to the DF soot, the B20 aggregates have a slightly more compact morphology and smaller primary particle size. No appreciable differences are observed in nanostructure between the DF and B20 soot. The thermogravimetric analysis demonstrates that the B20 soot is associated with lower peak temperature, burnout temperature and apparent activation energy, suggesting that it is more reactive than the DF soot. [ABSTRACT FROM AUTHOR]