Search

The electric field dependence on the dielectric properties of the porous ceramics was studied theoretically. The dielectric constant of the porous ceramics under certain direct current (dc) bias field and the real strength electric field in the porous ceramics were given quantitatively. As the pore can share the electric field, the tunability of the porous ceramics will be decreased when the porosity increases. The dielectric constant evolution of Ba0.6Sr0.4TiO3-based porous ceramics with the dc bias electric field can be successfully explained by our theoretical results. Taking Ba0.6Sr0.4TiO3-based porous ceramic samples, for example, there is good correspondence between the theoretical and the experimental results. [ABSTRACT FROM AUTHOR]

(Pb0.325Sr0.675)TiO3 (PST) ceramics were prepared by a traditional solid-state reaction technique. The dielectric and enhanced pyroelectric properties of PST ceramics were investigated under a DC bias field. The dielectric permittivity and dielectric loss of PST ceramics at Curie temperature were 2.97 × 10-4 and 0.006 without DC bias field, respectively. With a DC electric field of 0-500 V/mm, the maximum pyroelectric coefficient and the largest figure of merit (Fd) of PST ceramics were obtained, about 60 × 10-8 C cm-2 K-1 and 26 × 10-5 Pa-1/2, respectively. PST ceramics with such superior electric field enhanced pyroelectric properties have the potential for uncooled focal plane array detectors application. [ABSTRACT FROM AUTHOR]

Abstract: Porous Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ferroelectric ceramics with different pore size were prepared by solid-state sintering in air. The microstructural effect on the properties has been systematically investigated by SEM, ferroelectric hysteresis, strain–electric field curves and breakdown strength measurements. The results demonstrate that the microgeometry has a subtle effect on the ferroelectric and dielectric properties. However, the results also demonstrate that the electric field induced strain and the dielectric breakdown strength decreases with the increase of pore size. [Copyright &y& Elsevier]