Search

Quantum dots (QDs) have captured the attention of the scientific community due to their unique optical and electronic properties, leading to extensive research for different applications. They have also been employed as sensors for ionic species owing to their sensing properties. Detecting anionic species in an aqueous medium is a challenge because the polar nature of water weakens the interactions between sensors and ions. The anions bicarbonate (HCO3−), carbonate (CO32−), sulfate (SO42−), and bisulfate (HSO4−) play a crucial role in various physiological, environmental, and industrial processes, influencing the regulation of biological fluids, ocean acidification, and corrosion processes. Therefore, it is necessary to develop approaches capable of detecting these anions with high sensitivity. This study utilized CdTe QDs stabilized with cysteamine (CdTe-CYA) as a fluorescent sensor for these anions. The QDs exhibited favorable optical properties and high photostability. The results revealed a gradual increase in the QDs' emission intensity with successive anion additions, indicating the sensitivity of CdTe-CYA to the anions. The sensor also exhibited selectivity toward the target ions, with good limits of detection (LODs) and quantification (LOQs). Thus, CdTe-CYA QDs show potential as fluorescent sensors for monitoring the target anions in water sources. [ABSTRACT FROM AUTHOR]

A novel vanadium–cellulose composite thin film-based on angular interrogation surface plasmon resonance (SPR) sensor for ppb-level detection of Ni(II) ion was developed. Experimental results show that the sensor has a linear response to the Ni(II) ion concentrations in the range of 2–50 ppb with a determination coefficient (R2) of 0.9910. This SPR sensor can attain a maximum sensitivity (0.068° ppb−1), binding affinity constant (1.819 × 106 M−1), detection accuracy (0.3034 degree−1), and signal-to-noise-ratio (0.0276) for Ni(II) ion detection. The optical properties of thin-film targeting Ni(II) ions in different concentrations were obtained by fitting the SPR reflectance curves using the WinSpall program. All in all, the proposed Au/MPA/V–CNCs–CTA thin-film-based surface plasmon resonance sensor exhibits better sensing performance than the previous film-based sensor and demonstrates a wide and promising technology candidate for environmental monitoring applications in the future. [ABSTRACT FROM AUTHOR]

A novel design of a surface plasmon resonance (SPR) sensor based on the heterostructure of 2D nanomaterials, viz. blue phosphorus (BlueP) and molybdenum disulfide (MoS2), coupled with an adhesive layer of zinc oxide (ZnO) is presented here to enable significant plasmonic performance enhancement. The five-layer SPR system based on the Kretschmann configuration consists of ZnO sandwiched between a BK7 glass prism and gold (Au) layer, a BlueP-MoS2 heterostructure, and a sensing medium. The numerical analysis of the proposed sensor is carried out using the transfer matrix method and the sensor performance parameters; sensitivity, full width at half maximum (FWHM), and quality factor (QF) are studied at an operating wavelength of 633 nm for refractive index change in the range 1.33–1.335 RIU. The thicknesses of the Au, ZnO, and BlueP-MoS2 heterostructure layers are optimized and the sensitivity (260°/RIU) and QF (48.14 RIU−1) of the proposed sensor with 48 nm Au, 6 nm ZnO, and a monolayer of BlueP-MoS2 (0.75 nm) are enhanced by 51.16% and 19.3% over the conventional SPR sensor. The rational design of the proposed SPR sensor delivering significantly large sensitivity is suited for experimental realization to deploy ZnO as an effective adhesive layer with the BlueP-MoS2 heterostructure for improved sensing performance. [ABSTRACT FROM AUTHOR]

Heavy metal ions, one of the major pollutants in the environment, exhibit non-degradable and bio-chain accumulation characteristics, seriously damage the environment, and threaten human health. Traditional heavy metal ion detection methods often require complex and expensive instruments, professional operation, tedious sample preparation, high requirements for laboratory conditions, and operator professionalism, and they cannot be widely used in the field for real-time and rapid detection. Therefore, developing portable, highly sensitive, selective, and economical sensors is necessary for the detection of toxic metal ions in the field. This paper presents portable sensing based on optical and electrochemical methods for the in situ detection of trace heavy metal ions. Progress in research on portable sensor devices based on fluorescence, colorimetric, portable surface Raman enhancement, plasmon resonance, and various electrical parameter analysis principles is highlighted, and the characteristics of the detection limits, linear detection ranges, and stability of the various sensing methods are analyzed. Accordingly, this review provides a reference for the design of portable heavy metal ion sensing. [ABSTRACT FROM AUTHOR]

In recent years, there has been an increased demand for highly sensitive and selective biosensors for neurotransmitters, owing to advancements in science and technology. Real-time sensing is crucial for effective prevention of neurological and cardiovascular diseases. In this review, we summarise the latest progress in aptamer-based biosensor technology, which offers the aforementioned advantages. Our focus is on various biomaterials utilised to ensure the optimal performance and high selectivity of aptamer-based biosensors. Overall, this review aims to further aptamer-based biosensor technology. [ABSTRACT FROM AUTHOR]

Surface plasmonic sensors have received considerable attention, found extensive applications, and outperformed conventional optical sensors. In this work, biopolymer chitosan (CS) was used to prepare the bilayer structure (CS/Au) of a plasmonic refractive index sensor for dopamine (DA) detection. The sensing characteristics of the developed plasmonic sensor were evaluated. Increasing DA concentrations significantly shifted the SPR dips. The sensor exhibited stability and a refractive index sensitivity of 8.850°/RIU in the linear range 0.1 nM to 1 µM with a detection limit of 0.007 nM and affinity constant of 1.383 × 108 M−1. The refractive index and thickness of the CS/Au structure were measured simultaneously by fitting the obtained experimental findings to theoretical data based on Fresnel equations. The fitting yielded the refractive index values n (1.5350 ± 0.0001) and k (0.0150 ± 0.0001) for the CS layer contacting 0.1 nM of DA, and the thickness, d was (15.00 ± 0.01) nm. Then, both n and d values increased by increasing DA concentrations. In addition, the changes in the FTIR spectrum and the variations in sensor surface roughness and structure obtained by AFM analysis confirmed DA adsorption on the sensing layer. Based on these observations, CS/Au bilayer has enhanced the performance of this plasmonic sensor, which showed promising importance as a simple, low-cost, and reliable platform for DA sensing. [ABSTRACT FROM AUTHOR]

The surface plasmon resonance (SPR) is a phenomenon based on the combination of quantum mechanics and electromagnetism, which leads to the creation of charge oscillations on a metal–dielectric interface. The SPR phenomenon creates a signal which measures refractive index change at the metal–dielectric interface. SPR-based sensors are being developed for real-time and label-free detection of water pollutants, toxins, disease biomarkers, etc., which are highly sensitive and selective. Smartphones provide hardware and software capability which can be incorporated into SPR sensors, enabling the possibility of economical and accurate on-site portable sensing. The camera, screen, and LED flashlight of the smartphone can be employed as components of the sensor. The current article explores the recent advances in smartphone-based SPR sensors by studying their principle, components, application, and signal processing. Furthermore, the general theoretical and practical aspects of SPR sensors are discussed. [ABSTRACT FROM AUTHOR]

SPR-based technology has emerged as one of the most versatile optical tools for analyzing the binding mechanism of molecular interaction due to its inherent advantages in sensing applications, such as real-time, label-free, and high sensitivity characteristics. SPR is widely used in various fields, including healthcare, environmental management, and food-borne illness analysis. Meanwhile, kidney disease has grown to be one of the world's most serious public health problems in recent decades, resulting in physical degeneration and even death. As a result, several studies have published their findings regarding developing of reliable sensor technology based on the SPR phenomenon. However, an integrated and comprehensive discussion regarding the application of SPR-based sensors for detecting of kidney disease has not yet been found. Therefore, this review will discuss the recent advancements in the development of SPR-based sensors for monitoring kidney-related diseases. Numerous SPR configurations will be discussed, including Kretschmann, Otto, optical fiber-based SPR, and LSPR, which are all used to detect analytes associated with kidney disease, including urea, creatinine, glucose, uric acid, and dopamine. This review aims to show the broad application of SPR sensors which encouraged the development of SPR sensors for kidney problems monitoring. [ABSTRACT FROM AUTHOR]

Abnormality of dopamine (DA), a vital neurotransmitter in the brain's neuronal pathways, causes several neurological diseases. Rapid and sensitive sensors for DA detection are required for early diagnosis of such disorders. Herein, a carbon quantum dot (CQD)-based refractive index surface plasmon resonance (SPR) sensor was designed. The sensor performance was evaluated for various concentrations of DA. Increasing DA levels yielded blue-shifted SPR dips. The experimental findings revealed an excellent sensitivity response of 0.138°/pM in a linear range from 0.001 to 100 pM and a high binding affinity of 6.234 TM−1. The effects of varied concentrations of DA on the optical characteristics of CQD thin film were further proved theoretically. Increased DA levels decreased the thickness and real part of the refractive index of CQD film, according to fitting results. Furthermore, the observed reduction in surface roughness using AFM demonstrated that DA was bound to the sensor layer. This, in turn, explained the blue shift in SPR reflectance curves. This optical sensor offers great potential as a trustworthy solution for direct measurement due to its simple construction, high sensitivity, and other sensing features. [ABSTRACT FROM AUTHOR]

Water contamination by mercury ions (Hg2+) causes irreversible and serious effect on the ambient environment, ecological systems, and human health, necessitating further improvement of Hg2+ monitoring at low concentrations. Here, we proposed a novel surface plasmon resonance (SPR) sensor for Hg2+ detection with desirable advantages of high sensitivity, simple operation, label-free, and low cost, in which the chitosan/poly (vinyl alcohol)/SnO2 composite film was modified on sensing surface as the active layer for sensitivity enhancement. Benefiting from the relatively high refractive index of SnO2 nanoparticles, the evanescent field generated at the metal-solution interface can be significantly enhanced, which results in a 5 times improvement of sensitivity. Through appropriate optimization in the aspects of componential constitutions, the sensor exhibits excellent sensitivity of 25.713 nm/μg/L and ultra-low calculated detection limit of 6.61 ng/L(32.95 pM). Such detection limit is strikingly lower than the limitation (10 nM) in drinking water set by the US Environmental Protection Agency. In addition, the as-prepared sensor presents relatively high selectivity for Hg2+, attributing to plenty of binding sites for specific adsorption produced by functionalized chitosan/poly (vinyl alcohol) composites, which have been furtherly verified by characterization of FTIR and XPS spectra. The proposed sensor also exhibits great repeatability and good time stability for 15 days. This work provides a promising strategy for developing high-performance SPR sensor for Hg2+ detection and a prospective application in environmental monitoring. [ABSTRACT FROM AUTHOR]

The aim is to investigate how the sensing features of a surface plasmon resonance sensor based on the Kretschmann configuration are affected when the optical substrate is an anisotropic medium. The investigation considers the use of two different uniaxial anisotropic crystals, one made of barium titanate and another made of lithium niobate, as the optical substrate. It also considered that the sensor operates in the angular interrogation mode at the gold–water interface. The Fresnel equations and the finite element method were employed to determine the sensing features. The present study revealed that both formulations provide almost identical results for the resonance angle (difference less than 1%). On the other hand, the two formulations provide results with significant differences for additional features like the sensitivity and the full width at half maximum. [ABSTRACT FROM AUTHOR]

The spoof surface plasmon polaritons (SSPPs) structure can be used as a sensor in THz region for the biosensing. The accuracy of resonance and amplitude for sensor is very important for biosensing. The momentum matching of SSPPs determines the resonance position and the gap distance determines the amplitude. For the biomolecular sensing, the sample is positioned between the prism base and the SSPPs structure. The momentum matching condition at the current study does not consider the effect of sample refractive index and the resonance position has a significant error. Here the correction is made to the momentum matching condition which considers the effect of the sample refractive index. A comparative study of surface plasmon resonance (SPR) sensing performance based on frequency and angle variations shows that the sensing sensitivity for frequency region is superior to that of angle region; in the meanwhile, as an application of biosensors, we have detected different types of brain lesions in the frequency range. Furthermore, the reflection amplitude is related to gap size between the prism and SSPPs. The relationship of gap size and reflection amplitude is studied. By using the relationship between gap size and reflection amplitude, the amplitudes at different frequencies or incident angles for different refractivities have the same reflection dips compared to the other published results. The simulation is performed and the results proved the theory. [ABSTRACT FROM AUTHOR]

Detection of lead(II) (Pb2+) ions in water is important for the protection of human health and environment. The growing demand for onsite detection still faces challenges for sensitive and easy-to-use methods. In this work, a novel surface plasmon resonance (SPR) biosensor based on GR-5 DNAzyme and gold nanoparticles (AuNPs) was developed. Thiolated DNAzyme was immobilized on the gold surface of the sensor chip followed by anchoring the substrate-functionalized AuNPs through the DNAzyme-substrate hybridization. The coupling between the localized surface plasmon (LSP) of AuNPs and the surface plasmon polaritons (SPP) on the gold sensor surface was used to improve the sensitivity. The substrate cleavage in the presence of Pb2+ ions was catalyzed by DNAzyme, leading to the removal of AuNPs and the diminished LSP-SPP coupling. The optimal detection limit was 80 pM for the sensor fabricated with 1 μM DNAzyme, corresponding to two or three orders of magnitude lower than the toxicity levels of Pb2+ in drinking water defined by WHO and USEPA. By tuning the surface coverage of DNAzyme, the sensitivity and dynamic range could be controlled. This sensor also featured high selectivity to Pb2+ ions and simple detection procedure. Successful detection of Pb2+ ions in groundwater indicates that this method has the prospect in the onsite detection of Pb2+ ions in water. Given the variety of AuNPs and metal-specific DNAzymes, this detection strategy would lead to the development of more sensitive and versatile heavy metal sensors. [ABSTRACT FROM AUTHOR]

Applying fiber-optics on surface plasmon resonance (SPR) sensors is aimed at practical usability over conventional SPR sensors. Recently, field localization techniques using nanostructures or nanoparticles have been investigated on optical fibers for further sensitivity enhancement and significant target selectivity. In this review article, we explored varied recent research approaches of fiber-optics based localized surface plasmon resonance (LSPR) sensors. The article contains interesting experimental results using fiber-optic LSPR sensors for three different application categories: (1) chemical reactions measurements, (2) physical properties measurements, and (3) biological events monitoring. In addition, novel techniques which can create synergy combined with fiber-optic LSPR sensors were introduced. The review article suggests fiber-optic LSPR sensors have lots of potential for measurements of varied targets with high sensitivity. Moreover, the previous results show that the sensitivity enhancements which can be applied with creative varied plasmonic nanomaterials make it possible to detect minute changes including quick chemical reactions and tiny molecular activities. [ABSTRACT FROM AUTHOR]

This Special Issue compiles a set of innovative developments on the use of graphene-based materials in the fabrication of sensors. In particular, these contributions report original studies on a wide variety of sensors, such as gas sensors for NO2 or NH3 detection, antibody biosensors or mass sensors. All these devices have one point in common: they have been built using graphene-based materials like graphene, graphene oxide, reduced graphene oxide, inkject printing graphene, graphene-based composite sponges, graphene screen-printed electrodes or graphene quantum dots. [ABSTRACT FROM AUTHOR]

In this paper, a reconfigurable sensing platform based on an asymmetrical metal-insulator-metal stacked structure integrating an indium tin oxide (ITO) ultrathin film is proposed and investigated numerically. The epsilon-near-zero (ENZ) mode and antisymmetric mode can be resonantly excited, generating near-perfect absorption of over 99.7% at 1144 and 1404 nm, respectively. The absorptivity for the ENZ mode can be modulated from 90.2% to 98.0% by varying the ENZ wavelength of ITO by applying different voltages. To obtain a highly sensitive biosensor, we show that the proposed structure has a full-width at half-maximum (FWHM) of 8.65 nm and a figure-of-merit (FOM) of 24.7 with a sensitivity of 213.3 nm/RI (refractive index) for the glucose solution. Our proposed device has potential for developing tunable biosensors for real-time health monitoring. [ABSTRACT FROM AUTHOR]