Search

A linear humidity sensor based on bi-layered sensing area using exfoliated chromium carbide (Cr 3 C 2 ) and polyacrylamide (PAM) thin films has been fabricated through all printed methods. Transition metal carbides have unique properties that can be applied in various gas sensing applications. In this work, different combinations of Cr 3 C 2 with two polymers have been used to fabricate high performance linear humidity sensors. Cr 3 C 2 was processed using wet grinding exfoliation to achieve flakes and small particles of the material. Based on the working principle and sensing results of the single layered sensors, a novel bi-layered structure was proposed and fabricated with stable linear response and good sensitivity. The sensors are capable of measuring percentage relative humidity accurately in range of 0% RH to 90% RH with an absolute change of 660 Ω/%RH and fast response and recovery times of 1 s and 1.9 s respectively. The sensors can also work with simple frequency based read-out circuit with a highly linear and stable response. The fabricated sensors are cheap, easy to fabricate, and are ideal to be used in high end environmental and health monitoring applications. [ABSTRACT FROM AUTHOR]

A highly sensitive body motion sensor has been fabricated based on a composite active layer of zinc stannate (ZnSnO) nano-cubes and poly(vinylidene fluoride) (PVDF) polymer. The thin film-based active layer was deposited on polyethylene terephthalate flexible substrate through D-bar coating technique. Electrical and morphological characterizations of the films and sensors were carried out to discover the physical characteristics and the output response of the devices. The synergistic effect between piezoelectric ZnSnO nanocubes and β phase PVDF provides the composite with a desirable electrical conductivity, remarkable bend sensitivity, and excellent stability, ideal for the fabrication of a motion sensor. The recorded resistance of the sensor towards the bending angles of −150° to 0° to 150° changed from 20 MΩ to 55 MΩ to 100 MΩ, respectively, showing the composite to be a very good candidate for motion sensing applications. [ABSTRACT FROM AUTHOR]

A high performance humidity sensor for environmental and health monitoring was fabricated with a polymer–polymer composite sensing layer. PEDOT:PSS/PVA composite was synthesized by physically mixing PEDOT:PSS aqueous solution with PVA aqueous solution and was then sonicated and stirred at elevated temperatures. Sensors were fabricated by depositing the sensing layer on an IDT printed on a piezoelectric substrate. The sensors’ electrical characterizations were performed to find out the response toward varying humidity levels. The results showed that the composite's response toward humidity change is very stable and can effectively measure low humidity levels with fast response time. The AC capacitance and impedance of the sensor were measured between 0%RH and 80%RH. The maximum change in impedance was from 137 kΩ to 110 kΩ and for capacitance from 96 pF to 124 pF. The sensors were deployed in a real time humidity measurement and the readings were converted into corresponding %RH. The results indicated that the sensors show promising response with ±1% reading error. The response and recovery times of the sensor were measured to be 0.625 s and 0.53 s respectively showing excellent performance of the sensor toward increasing and decreasing humidity levels. [ABSTRACT FROM AUTHOR]

Single transducer with humidity sensing materials has limitations in both range and sensitivity, which cannot be used to detect the full range of humidity with consistent sensitivity. To enlarge range and improve sensitivity in the all range relative humidity (RH), we propose a highly sensitive and full range detectable humidity sensor based on multiple inter-digital transducer (IDT) electrodes connected in series with poly(3,4-ethylenedioxythiophene) doped poly (styrene sulfonate) anions (PEDOT: PSS), C15H15N3O2 (Methyl Red), and graphene oxide (GO) thin films as the active sensing materials. The humidity sensor with single active material has a limit in the detecting ranges, where the GO, PEDOT: PSS, and Methyl Red materials have sensing responses of 0 to 78% RH, 30 to 75% RH, and 25 to 100% RH, respectively. However, a humidity sensor using combined three active materials can respond to much wider range of RH with high sensitivity, where the IDTs and the active regions were prepared using ink-jet printing and spin coating, respectively. This proposed sensor can detect a full range of 0% RH to 100% RH. The response and recovery times are 1 sec and 3.5 sec, respectively. Our single sensing device using multiple IDTs connected different active materials in series can overcome the limitations of single transducer based sensor for the high performance sensor applications. [ABSTRACT FROM AUTHOR]

• Integrated micro temperature and humidity sensors. • Real time temperature compensation for humidity sensors output. • Liquid mechanical exfoliation of MoS2 to achieve 2D flakes and particles suspended in PEO polymer matrix. • Detailed investigation of working principle and sensing mechanism. • Micron level size compatible with integration in MEMS based commercial devices. Percentage relative humidity is dependent on environmental temperature but the fact is ignored in most of research on humidity sensors. Secondly, the physical size of sensors should be small enough to enable integration on a commercial microchip. In this work, an integrated micro temperature plus humidity sensor system is presented that compensates for the effect of surrounding temperature on the output resistance of humidity sensor. The sensors were fabricated using Electrohydrodynamic drop-on-demand (EHD-DOD) printing for the electrodes, and Electrospray deposition (ESD) for active layer fabrication of humidity sensors. Electrode line widths were 10 μm while the combined area of both sensors was ∼2 mm2. Meander type silver patterns were used as resistive temperature sensors and interdigitated transducer (IDT) electrodes were used for humidity sensors. The active layer of humidity sensors was fabricated using a novel composite of Polyethylene Oxide (PEO) and 2D Molybdenum disulfide (MoS 2) flakes to achieve a highly sensitive (85 kΩ/%RH) and almost linear response for a wide detection range (0–80% RH) of relative humidity. A mathematical model relating the outputs of both sensors was developed to compensate for the effects of temperature. The system presents optimal solution for commercialization ready temperature compensated integrated micro temperature and humidity sensors fabricated through all printing techniques. [ABSTRACT FROM AUTHOR]