Search

Background: The spatial and temporal dose rate distribution of pencil beam scanning (PBS) proton therapy is important in ultra-high dose rate (UHDR) or FLASH irradiations. Validation of the temporal structure of the dose rate is crucial for quality assurance and may be performed using detectors with high temporal resolution and large dynamic range. Purpose: To provide time-resolved in vivo dose rate measurements using a scintillator-based detector during proton PBS pre-clinical mouse experiments with dose rates ranging from conventional to UHDR. Methods: All irradiations were performed at the entrance plateau of a 250 MeV PBS proton beam. A detector system with four fiber-coupled ZnSe:O inorganic scintillators and 20 μs temporal resolution was used for dose rate measurements.The system was first characterized in terms of precision and stem signal. The detector precision was determined through repeated irradiations with the same field. The stem signal contribution was quantified by irradiating two of the detector probes alongside a bare fiber (fiber without a coupled scintillator). Next, the detector system was calibrated against an ionization chamber (IC) with all four detector probes and the IC placed in a water bath at 2 cm depth. A scan pattern covering 9.6 × 9.6 cm was used. Multiple irradiations with different requested nozzle currents provided instantaneous dose rates at the detector positions in the range of 7–1270 Gy/s. The correspondence of the detector signal (in Volts) to the instantaneous dose rate (in Gy/s) was found.The instantaneous dose rate was calculated from the beam current and the spot-to-detector distance assuming a Gaussian beam profile at distances up to 8 mm from the spot. Afterwards, the calibrated system was used in vivo, in mouse experiments, where mouse legs were irradiated with a constant dose and varying field dose rates of 0.7–87.5 Gy/s. The instantaneous dose rate was measured for each delivered spot and the delivered dose was determined as the integrated instantaneous dose rate. The spot dose profile and PBS dose rate map were calculated. The dose contamination to neighbouring mice were measured together with the upper limit of the dose to the mouse body. Results: The detectors showed high precision with ≤0.4% fluctuations in the measured dose. The stem signal exceeded 10% for spots <5 mm from the optical fiber and >18 mm from the scintillator.It contributed up to 0.2% to the total dose, which was considered negligible. All four detectors showed a non-linear relation between signal and instantaneous dose rate, which was modelled with a polynomial response function. In the mouse experiments, the measured scintillator dose showed 1.8% fluctuations, independent of the field dose rate.The in vivo measured spot dose profile had tails that deviated from a Gaussian profile with measurable dose contributions from spots up to 85 mm from the detector. Neighbour mouse irradiation contributed ∼1% of the total mouse dose. The upper limit of the mouse body dose was 6% of the mouse leg dose. Conclusions: A fiber-coupled inorganic scintillator-based detector system can provide high precision in vivo measurements of the instantaneous dose rate if correction for the non-linear dose rate dependency is applied. [ABSTRACT FROM AUTHOR]

Purpose: Key factors in FLASH treatments are the ultra‐high dose rate (UHDR) and the time structure of the beam delivery. Measurement of the time structure in pencil beam scanning (PBS) proton FLASH treatments is challenging for many types of detectors since high temporal resolution is needed. In this study, a fast scintillator detector system was developed and used to measure the individual spot durations as well as the time when the beam moves between two positions (transition duration) during PBS proton FLASH and UHDR treatments. The spot durations were compared with machine log‐file recordings. Methods: A detector system based on inorganic scintillating crystals was developed. The system consisted of four detector probes made of a sub‐millimeter ZnSe:O crystal that was coupled via an optical fiber to an optical reader with 50 kHz sampling rate. The detector system was used in two experiments, both performed with a PBS proton beam with 250 MeV beam energy and 215 nA requested nozzle beam current. The sampling rate enabled multiple measurements during each spot delivery and during the beam transition between spots. First, the detector was tested in a phantom experiment, where a total of 305 scan sequences were delivered to the four detectors. The number of spots delivered without beam interruption in a single scan sequence ranged from one to 35. The spot duration and transition duration were measured for each individual spot. Secondly, the detector system was used in vivo in preclinical experiments with FLASH irradiation of mouse legs placed in the entrance plateau of the beam. A single detector was placed 1 cm downstream of the irradiated mouse leg. The mouse dose ranged from 30.5 to 44.2 Gy and the field consisted of 35 spots. The spot durations as well as the mean dose rate (field dose divided by the measured field duration) for each mouse were determined using the detector and then compared with the corresponding log files. Results: The phantom experiment showed that the logged total duration of an uninterrupted spot sequence was consistently shorter than the measured duration with a difference of −0.252 ms (95% confidence interval: [‐0.255, −0.249 ms]). This corresponded to 0.05%–0.07% of the spot sequence duration in the mice experiments. For individual spots, the mean ± 1SD difference between logged and measured spot duration was −0.39 ± 0.05 ms for the first spot in a sequence, 0.13 ± 0.04 ms for the last spot in a sequence, and −0.0017 ± 0.09 ms for the intermediate spots in a sequence. The measured spot transition durations were 0.20 ± 0.04 ms (5.1 mm horizontal steps) and 0.50 ± 0.04 ms (5.0 mm vertical steps). For the mouse experiments, the mean dose rate calculated from the measured field duration was 84.1–92.5 Gy/s. It agreed with log files with a root mean square difference of 0.02 Gy/s. Conclusions: Fiber‐coupled scintillator detectors were designed with sufficient temporal resolution to measure the spot and transition duration during PBS proton UHDR deliveries. Their small volume makes them feasible for in vivo use in preclinical FLASH studies. The logged spot durations were in excellent agreement with measurements but showed small systematic errors in the logged duration for the first and last spot in a sequence. [ABSTRACT FROM AUTHOR]