Search

Measurement of total ionizing dose in a radiation field is efficiently carried out by ionisation chambers. The paper details the design of a mixed-signal ASIC for the front-end electronics of ionisation chambers. A single chip solution for ultra-low current measurement is designed by combining the current processing analog section realized using low leakage thick gate transistors and the data handling digital section implemented using fast thin gate transistors. The design succeeds in limiting the cross coupling between the two circuit domains using deep n-wells and guard rings. The ASIC fabricated in 130 nm technology attains a wide dynamic range of −7 fA to $- 20\,\,\mu \text{A}$ with maximum error in measurement less than ±4 %. The ASIC occupies an area of 3.52 mm2 and has a total power consumption of 17.4 mW. The femtoampere range input leakage current of the ASIC contributed primarily by the ESD diodes was found to be varying exponentially with temperature. Dose rate measurements from $5 ~\mu $ Sv/h to 7.4 Sv/h is demonstrated by interfacing the ASIC to an ionisation chamber. [ABSTRACT FROM AUTHOR]

Structural health monitoring using noninvasive methods is one of the major challenges that aerospace manufacturers face in this decade. Our work in this field focuses on the development and the system integration of millimetric piezoelectric sensors/ actuators to generate and measure specific guided waves. The aim of the application is to detect mechanical flaws on complex composite and alloy structures to quantify efficiently the global structures' reliability. The study begins by a physical and analytical analysis of a piezoelectric patch. To preserve the structure's integrity, the transducers are directly pasted onto the surface which leads to a critical issue concerning the interfacing layer. In order to improve the reliability and mitigate the influence of the interfacing layer, the global equations of piezoelectricity are coupled with a load transfer model. Thus we can determine precisely the shear strain developed on the surface of the structure. To exploit the generated signal, a high precision analog charge amplifier coupled to a double T notch filter were designed and scaled. Finally, a novel joined time-frequency analysis based on a wavelet decomposition algorithm is used to extract relevant structures signatures. Finally, this paper provides examples of application on aircraft structure specimens and the feasibility of the system is thus demonstrated. [ABSTRACT FROM AUTHOR]