Search

C1–C5 aldehydes are toxic substances formed by chemical transformation of organic compounds into the atmosphere. Actual methods used to analyze aldehydes in environmental samples are usually slow and complex, whereas there is a need for rapid and frequent monitoring. Here, a simple, fast method for the spectrophotometric determination of the total content of aldehydes in waters has been developed. The method is based on the spectrophotometric determination at 478 nm of hydrazones in an alkaline medium, generating the hydrazon-α-oxiazinic tautomeric forms, which are formed by condensation of aldehydes and 3,5-dinitrobenzhydrazide (3,5-DHBA). We optimized the conditions of the condensation reaction, e.g., 0.05–1.0 mol L−1 H2SO4, heating at 95 °C for 10 min, and the procedure of the spectrophotometric determination of the total aldehyde content at pH higher than 11 and λmax of 478 nm. Those conditions allow the determination of the total aldehyde content in the presence of various interferences, e.g., most ketones including acetone, 2000-fold of anions: HCO3−, CH3COO−, SO42−, Cl−, F− and cations: Li+, Na+, K+, Mg2+, Ca2+, Sr2+. The calibration curve was linear in the range of 0.087–13.5 mg L−1 for aldehydes, with R2 of 0.99; the limit of detection was 27 μg L−1 (0.9 μmol L−1) and the limit of determination was 87 μg L−1 (3.2 μmol L−1) in terms of formaldehyde. The suggested procedure was successfully applied for the determination of the total aldehyde content in rainwaters and model mixtures with recovery of 97.8–102.7%. The accuracy of the procedure was confirmed by an analysis with a reference method.

The present study is dedicated to development of improved method for determination of trace amounts of fluorides in natural waters which is based on the interaction of fluorides with ion associate (IA) of Al(III), salicylic aldehyde acylhydrazones (benzhydrazone (SABH) and 4-picolinhydrazone (SAPH)) and polymethine dye Astra Phloxine FF (AP). Comparison of analytical forms [Al(SABH)2]⋅AP and [Al(SAPH)2]⋅AP showed that the analytical system Al(III)-SAPH-AP is more effective, namely, a higher level of preconcentration of the analytical form is ensured by and extraction equilibrium is achieved faster. Based on the study, we propose a new, fast, simple, reliable, sensitive, and accurate method of the indirect UV–Vis-spectrophotometric determination of fluorides grounded on the interaction of fluorides with IA of Al(III), SAPH and AP with the utilization of vortex-assisted liquid-liquid microextraction (VALLME). The method is based on the discoloration of the microextract of IA of Al(III), SAPH and AP (Al-SAPH-AP) in presence of fluoride ions due to the formation of fluoride complexes of aluminum with higher stability. The effect of various factors has been studied. The optimal conditions of the UV–Vis-spectrophotometric determination of fluorides were defined as: pH 7.0–10.0, 1.0⋅10−6 mol⋅L−1 Al(III); 4.0⋅10−5 mol⋅L−1 SAPH; 1.0⋅10−6 mol⋅L−1 AP; λ = 560 nm. VALLME have been carried out in 250 μL of CCl4 at 20:1 vol ratios of aqueous and organic phases, with vortexing at 3000 rpm for 15 s followed by centrifugation at 2000 rpm for 2 min. The determination of fluorides is feasible in the presence of various interferences. The calibration curve shows the linear dependence in the range of 0.3–114 μg⋅L−1 of the fluorides concentration (R2 = 0.993) with the limit of detection of 0.086 μg⋅L−1 and the limit of determination of 0.284 μg⋅L−1. The accuracy of the proposed protocol of fluorides determination was verified towards a reference method on the samples of natural rivers waters (RSD 2.6–3.1%, recovery 98.3–101.4%).

The procedure for determining Hg, Cd, Pb, Zn, Cu elements in fresh water based on the preconcentration of these metals as complexes using poly-3-pyridyl-5-thioxo-4-allyl-4,5-dihydro-1H-1,2,3-triazole-1-carbodithionic acid with further measurement of atomic adsorption are proposed. The detection limits for metals are 5, 8, 20, 5 and 20 ng/dm3 respectively.

The article investigated the impact of sodium salts of acylhydrazones of pyroracemic acid as modifiers of the matrix on the electrothermal atomic-absorption determination of aluminum. The technique has been developed for determination of aluminum in fresh waters with the detection limit 0.005 m/dm3.