Search

(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) Methods: Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s H3PO4 application + UBQ; (G2) 30 s H3PO4 application + UBQ; (G3) 15 s H3PO4 application + ethanol pre-treatment + UBQ; (G4) 30 s H3PO4 + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at p < 0.05. (3) Result: ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength (p < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface (p < 0.01). (4) Conclusions: The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo. [ABSTRACT FROM AUTHOR]

Purpose: To evaluate the immediate and aged bond strength and interfacial nanolaekage of different adhesives and protocols on dental elements prepared with diamond burs and Er:YAG laser. Materials and Methods: Forty molar crowns were flattened and a standardized smear layer was created. Teeth were divided into two main groups according to the dentin cutting technique: 1. Er:YAG laser for 30 s at 30 Hz repetition rate, 250 mJ energy per pulse, and water spray irrigation set at level 8; and 2. diamond bur. Each group was then divided into subgroups according to the adhesive protocol: SG1: dentin etching for 15 s followed by universal adhesive application (All Bond Universal, Bisco); SG2: universal adhesive application (All Bond Universal); SG3: two-step self-etch adhesive application (Clearfil SE Bond 2, Kuraray Noritake); SG4: etching followed by 3-step etch-and-rinse adhesive application (Optibond FL, Kerr). After curing the adhesives, resin composite buildups of 4 mm were made and specimens were sectioned to obtain 1-mm-thick sticks in accordance with the μTBS test technique. Sticks were stressed to failure at baseline and after 6 months of storage in artificial saliva. Three teeth per group were prepared for nanoleakage interfacial analyses. Data were statistically analyzed with three-way ANOVA and Tukey's post-hoc test (p < 0.05).Results: A significant difference in bond strengths was found for treatment, aging, and adhesive protocol. Nanoleak age analysis showed higher marginal infiltration in Er:YAG-treated groups both at baseline and after aging. Conclusions: Surfaces prepared with diamond burs presented higher bond strengths than did those prepared with Er:YAG laser. Adhesive protocols and aging could influence the adhesive-dentin interface. Further studies are necessary to validate the results obtained. [ABSTRACT FROM AUTHOR]

Featured Application: The influence of brushing motion on root canal anatomy preservation after shaping with NiTi single file reciprocating instruments was evaluated. The brushing movement may accentuate canal transportation especially in the coronal third. Brushing motion has been proposed for endodontic single-file reciprocating systems to eliminate coronal interferences, but it may hesitate in a less conservative root canal shaping. The aim of the study was to compare the maintenance of the original root canal anatomy using the WaveOne Gold (WOG) technique with or without a brushing motion. Sixty extracted human mandibular first molars were selected. Manual canal scouting and mechanical glide path were performed. Samples were randomized into two groups (n = 30): WOG Primary was used to shape the mesio-lingual canals without (NB group) or with (B group) an intentional brushing motion. Specimens were scanned with micro-computed tomography (micro-CT) before and after instrumentation in order to match the volumes. Increases in canal volume and surface area were measured. Centroid shift and thickness of removed dentine from the inner curvature were assessed at the furcation, 1.5 mm and 3 mm apically from the furcation, and in relation to the point of maximum curvature. Data were analyzed by one-way ANOVA and post-hoc Student–Newmann–Keuls tests (p < 0.05). No brushing technique resulted in being significantly associated with a better maintenance of the canal anatomy, especially in the coronal third (p < 0.05). When using the WOG system, a no-brushing technique resulted in less invasive shaping, reducing the risk of stripping. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the bond strength of fiber posts luted with a one-step self-etching adhesive with the push-out test after phosphoric acid conditioning of the root dentin. Thirty-six single-rooted teeth were endodontically treated. Teeth were sectioned perpendicularly to the cementoenamel junction, and a 10-mm post space was prepared with a calibrated bur. Specimens were then divided into three groups according to the adhesive protocol: A, total-etch three steps; B, self-etch one step; and C, 32% phosphoric acid conditioning and self-etch one step. Fiber posts were luted with self-curing resin- based cement. Teeth were cut in 1-mm slices and pushed until failure with an Instron machine. Results were statistically analyzed with the ANOVA and Bonferroni tests (P < .05). Two additional specimens from each group were examined under the scanning electron microscope (SEM). The 32% phosphoric acid significantly intiuenced the push-out bond strength of fiber posts luted with self-etch adhesives (P < .05). SEM analysis showed a continuous hybrid iayer with resin tags and iaterai branches in groups A and C, while group B showed smear iayer dissolution with poor intiitration of the tubules. [ABSTRACT FROM AUTHOR]

Purpose: Epidemiological data showed that 16%-30% of 7- to 21-year-old patients have experienced dental trauma. Direct restorations can achieve good esthetic and functional results with significant conservation of dental tissues. This approach is far more in agreement with modern, less-invasive restorative concepts, especially in young patients. The aim of the study was to describe functional and esthetic parameters of a direct restorative treatment with a 5-year follow-up. Case Report: The 11-year-old male patient was referred to the Endodontic Department of the University of Turin Dental School for a traumatic episode involving the maxillary right central incisor. Clinical and radiographic examination showed the presence of complicated crown-root fracture and incomplete root development with periapical radiolucency and inadequate endodontic treatment with overfilling. Orthograde retreatment was executed, obtaining an apical seal with a 3-mmlayer of white MTA (ProRoot MTA, Tulsa Dental). Afterwards, the excess material and the expected fibrous tissues were removed with apical microsurgery, performed with microscopic vision (OPMI Pro Ergo, Carl Zeiss). Since the flap was raised, the coronal fracture margin was exposed and marginal relocation was carried out using flowable composite. After two weeks, a direct restoration was placed using a wax-up to plan and manage the treatment. A silicon index was created to serve as a guide for the direct composites. Additive restorations were then performed following a standardized clinical procedure: rubber-dam isolation, etch-and-rinse adhesive application, and fabrication of direct additive restorations using Clearfil-Majesty ES2 (Kuraray) with an incremental layering technique with the help of silicon guides. Dentin and enamel shades were then layered to complete the direct restorations. Finally, teeth were finished and polished with diamond bur and soft flex disks. Results: The 5-year follow-up showed complete healing of the periapical lesion and correct preservation of function and esthetic parameters. Conclusion: Nanofilled composite resins and the use of new adhesives positively influence the longevity of the direct composite restorations, which have become a reliable approach with the maximum conservation of sound tooth structure in the era of the modern minimally invasive dentistry. [ABSTRACT FROM AUTHOR]

The aim of this in vitro study was evaluate the effect of application of synthetic hydroxyapatite on fiber post bond strength to radicular dentine. Forty, single-root teeth were endodontically treated and an 8 mm post space was prepared. Specimens were randomly placed in four groups ( n = 10 in each) and treated using the following fiber post luting procedures: group 1, 17% EDTA + Panavia SA; group 2, 17% EDTA + Teethmate Desensitizer + Panavia SA; group 3, All-Bond Universal + Duo-Link Universal; and group 4, All-Bond Universal + Teethmate Desensitizer + Duo-Link Universal. Fiber posts were luted in the post space and light-cured for 120 s using a light-emitting diode ( LED) lamp. After 7 d of storage at 37°C, the teeth were cut into 1-mm-thick slices, which were subjected to a push-out test until failure using a universal testing machine. Two specimens per group were prepared for scanning electron microscopy analysis. An energy-dispersive X-ray spectroscopy detector was used for elemental analysis of the specimen surface. The results were statistically analyzed using one-way anova. The fiber post bond strength was statistically significantly increased after the application of Teethmate Desensitizer to post space walls, either with a 10- MDP-containing self-adhesive cement or with a universal adhesive. Scanning electron microscopy and EDAX analysis showed that Teethmate Desensitizer created a calcium phosphate precipitate over post space dentinal tubules, which significantly improved the bond strength of the fiber post luted with 10-methacryloyloxydecyl dihydrogen phosphate (10- MDP)-containing adhesive systems. [ABSTRACT FROM AUTHOR]