Search

When exposure of the pulp to external environment occurs, reparative dentinogenesis can be induced by direct pulp capping to maintain pulp tissue vitality and function. These clinical situations require the use of materials that induce dentin repair and, subsequently, formation of a mineralized tissue., Objective: This work aims to assess the effect of tricalcium silicate cements and mineral trioxide aggregate cements, including repairing dentin formation and inflammatory reactions over time after pulp exposure in Wistar rats., Methodology: These two biomaterials were compared with positive control groups (open cavity with pulp tissue exposure) and negative control groups (no intervention). The evaluations were performed in three stages; three, seven and twenty-one days, and consisted of an imaging (nuclear medicine) and histological evaluation (H&E staining, immunohistochemistry and Alizarin Red S)., Results: The therapeutic effect of these biomaterials was confirmed. Nuclear medicine evaluation demonstrated that the uptake of 99mTc-Hydroxymethylene diphosphonate (HMDP) showed no significant differences between the different experimental groups and the control, revealing the non-occurrence of differences in the phosphocalcium metabolism. The histological study demonstrated that in mineral trioxide aggregate therapies, the presence of moderate inflammatory infiltration was found after three days, decreasing during follow-ups. The formation of mineralized tissue was only verified at 21 days of follow-up. The tricalcium silicate therapies demonstrated the presence of a slight inflammatory infiltration on the third day, increasing throughout the follow-up. The formation of mineralized tissue was observed in the seventh follow-up day, increasing over time., Conclusions: The mineral trioxide aggregate (WhiteProRoot®MTA) and tricalcium silicate (Biodentine™) present slight and reversible inflammatory signs in the pulp tissue, with the formation of mineralized tissue. However, the exacerbated induction of mineralized tissue formation with the tricalcium silicate biomaterial may lead to the formation of pulp calcifications.

Purpose: To compare the adhesion of a self-curing (Tokuyama Universal Bond, TUB) and a light-curing (Scotchbond Universal, SBU) universal adhesive to CAD/CAM materials, enamel, and dentin. This study also assessed differences in enamel adhesion between self-etch vs selective etching modes, as well as immediate and long-term adhesion to dentin for both adhesives. Materials and Methods: Shear bond strength (SBS) testing was used to assess adhesion to enamel, dentin, Lava Ultimate (LU), Vita Enamic (VE), IPS e.max CAD (LD), IPS e.max ZirCAD (3Y-Zir), and Lava Esthetic (5Y-Zir) (n = 10). Moreover, bonding to enamel in self-etch and selective etching modes (n = 10) as well as immediate and aged resin-dentin bond strength (24 h after bonding, after 100,000 thermal cycles [TC] and long-term storage) was evaluated using the microtensile bondstrength test (n = 30). Failure mode was also determined for the bonding to dentin. Statistical analyses consisted of oneway and two-way ANOVA with appropriate post-hoc Tukey-Kramer or two-sample t-tests, as well as the chi-squared or Fisher's exact test (a = 0.05). Results: TUB and SBU universal adhesives presented similar bonding to LU, VE, 3Y-Zir, and 5Y-Zir. However, SBS for TUB was superior to SBU when bonding to lithium-disilicate glass-ceramic (IPS e.max CAD). SBU showed better adhesion to dentin and enamel when used in the self-etch mode, while TUB promoted strong bond strength to enamel in the selective etching mode. TUB after TC was the only aging condition that yielded a significant reduction in resin-dentin bond strength. Conclusion: In-vitro adhesion performance of the self-curing and light-curing universal adhesives varies depending on the dental substrate or CAD/CAM restorative material used for bonding. [ABSTRACT FROM AUTHOR]

Background: Calcium silicate-based sealer has favorable properties for root canal filling, including hydroxyapatite formation during the setting process. However, this process can cause difficulty during post space preparation when the sealer is set. Additionally, the remaining sealer could interfere with the bond strength of fiber post to root canal dentin. The different adhesive strategies and fiber post cementation time may affect the bond strength of the fiber post. Thus, the objective of this study was to evaluate the effect of etching modes of Scotchbond™ Universal Plus adhesive and post cementation time on the push-out bond strength of a fiber post cemented in root canals obturated with calcium silicate-based sealer. Methods: Fifty-four teeth were randomly allocated to 6 groups (n = 9) based on etching modes: self-etch (SE) or etch-and-rinse (ER); post space preparation and cementation time: immediate (Im) or 7-day delayed (De): Im-Im, Im-De, and De-De. The root canals were obturated with calcium silicate-based sealer and the post space preparation was performed. The fiber post was cemented using RelyX™ Universal resin cement according to each group's design. For the push-out bond strength test, 1-mm slices of the coronal, middle, and apical regions were tested using a universal testing machine. The failure mode analysis was determined using a stereomicroscope. The data was analyzed with three-way analysis of variance. Results: No negative effects of etching modes, post space preparation or cementation time on push-out bond strength were detected (p > 0.05). Additionally, the root canal region also did not significantly affect the bond strength (p > 0.05). Conclusion: No significant differences were observed between the etching modes, post space preparation and cementation time and among root canal regions. Clinical relevance: The different etching modes of adhesive and post cementation time did not affect the bond strength of fiber post in calcium silicate filled-root canal. [ABSTRACT FROM AUTHOR]

Copyright of Acta Odontologica Latinoamericana: AOL is the property of Acta Odontologica Latinoamericana and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: This study aimed to evaluate dentin wear and biological performance of desensitizing materials. Methods: Seventy bovine root dentin blocks were sectioned. Half of the surface of each specimen was untreated (control) and the other half was immersed in EDTA and treated with the following desensitizing materials: placebo varnish (PLA), fluoride varnish (FLU), sodium fluoride (NaF) varnish + sodium trimetaphosphate (TMP), universal adhesive (SBU), S-PRG varnish (SPRG), biosilicate (BIOS), and amelotin solution (AMTN). After application, the specimens were submitted to an erosive-abrasive challenge and the wear analyzed by optical profilometer. Serial dilutions of extracts obtained from the culture medium containing discs impregnated with those desensitizers were applied on fibroblasts and odontoblasts-like cells cultures. Cytotoxicity and production of total protein (TP) by colorimetric assays were determined after 24 h. Data were statistically analyzed using Kruskal-Wallis, Dunn's, One-way ANOVA and Tukey tests (p ≤ 0.05). Results: No dentin wear was observed only for SBU. The lowest dentin wear was observed for AMTN and TMP. Cell viability was significantly reduced after treatment with undiluted extracts of PLA, FLU, TMP and SBU in fibroblasts and TMP and SBU in odontoblast-like cells. SPRG, BIOS and AMTN were cytocompatible at all dilutions tested. Considering TP results, no statistical difference was observed among the groups and high levels for TP were observed after TMP and FLU treatments. Conclusions: Universal adhesive system may protect dentin with opened tubules from wear after challenge. Extracts of adhesive and fluoride varnishes presented cytotoxic mainly on fibroblasts. The enamel protein may be a future alternative to treat dentin with opened tubules because it may cause low wear under erosive-abrasive challenge with low cytotoxic effects. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the bonding performance of self-adhesive flowable resin composites (SARs) to bovine teeth. Three SARs, one experimental, and two commercially available products, were used. The study parameters were shear bond strength (SBS), microleakage, and scanning electron microscopy (SEM) evaluation of bonding interfaces. The SBS of the materials was 14.1–15.1 MPa to enamel, 22.2–23.2 MPa to etched enamel, and 7.4–10.7 MPa to dentin. Specimens with pre-etching showed lower microleakage scores than those without pre-etching. SEM images of the interfaces of the materials showed excellent adaptation regardless of the substrate or etching mode. The study results indicate that enamel pre-etching can improve the bonding performance of SARs. [ABSTRACT FROM AUTHOR]

Background: Dentin hypersensitivity, often occurring after dental treatments or from erosive lesions, is a prevalent patient complaint. This study introduces a paste combining 8% L-arginine, calcium carbonate, and potassium nitrate to evaluate its impact on dentinal tubules occlusion, dentin permeability, and tooth sensitivity. Methods: Dentin surfaces from 24 third molars (thickness: 2 mm) were divided into two groups of 12. One received the experimental paste, while the other received a placebo without desensitizer. Permeability and sealing ability were assessed through scanning electron microscopy (SEM) and dentin permeability measurement. The pastes' effects on hypersensitivity were then examined in a triple-blind, randomized parallel-armed clinical trial with 16 eligible patients. Sensitivity to cold, touch, and spontaneous stimuli was recorded using the VAS scale at various intervals post-treatment. Statistical analysis was conducted using Shapiro-Wilk, Mann-Whitney U, Friedman, and Wilcoxon tests (α = 0.05). Results: The permeability test demonstrated a significant reduction in dentin permeability in the experimental group (P = 0.002) compared to the control (P = 0.178). SEM images revealed most dentinal tubules in the intervention samples to be occluded. Clinically, both groups showed a significant decrease in the three types of evaluated sensitivity throughout the study. However, no significant difference in sensitivities between the two groups was observed, with the exception of cold sensitivity at three months post-treatment (P = 0.054). Conclusion: The innovative desensitizing paste featuring 8% L-arginine, calcium carbonate, and potassium nitrate effectively occluded dentinal tubules and reduced dentin permeability. It mitigated immediate and prolonged dentin hypersensitivity to various stimuli, supporting its potential role in managing dentin hypersensitivity. Trial registration: http://irct.ir: IRCT20220829055822N1, September 9th, 2022. [ABSTRACT FROM AUTHOR]

Copyright of Brazilian Dental Science is the property of Brazilian Dental Science Journal-ICT-UNESP and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: This study aimed to evaluate the efficacy and safety of dentin hypersensitivity (DH) treatment using a newly developed device based on a powder jet deposition (PJD) technique that creates a hydroxyapatite (HAP) layer on the dentin surface, thereby alleviating the hypersensitivity. The effect of the PJD treatment was compared with that of conventional treatment using Teethmate Desensitizer (TMD; calcium-phosphate containing material with TTCP (Ca4(PO4)2O) and DCPA (CaHPO4)), which has been used clinically in Japan with well-confirmed effectiveness. Materials and methods: A randomized controlled trial was conducted including 35 patients who had symptoms of DH in two or more quadrants. Two test teeth were selected per patient (70 teeth in total) and randomly assigned to PJD or TMD treatment. The efficacy was evaluated using the improvement rate for air and scratch pain according to the scores obtained via visual analog scale 12 weeks after treatment. The safety assessment was performed focusing on gingival index (GI) and spontaneous pain. The t-test was used to analyze the non-inferiority of PJD treatment compared to TMD treatment. Results: The improvement rate of air pain was 69.0% for PJD and 69.7% for TMD. The improvement rate of scratch pain was 80.8% for PJD and 81.7% for TMD. Non-inferiority with a margin of 10% was not observed for both air and scratch pain. No change was observed in GI from baseline and the improvement rate of spontaneous pain for PJD was higher than that for TMD. Conclusion: Non-inferiority of PJD to TMD treatment was not observed in this study; however, it was not statistically demonstrated, and the results were thus interpreted as inconclusive. PJD did improve the DH symptoms, as did TMD. PJD's therapeutic effect was most likely attributable to the deposition of a HAP layer on the tooth surface, which would alleviate hypersensitivity for at least 12 weeks without causing severe adverse events. Trial registration: UMIN-CTR. ID: UMIN000025022. date: 02/12/2016. [ABSTRACT FROM AUTHOR]

Background: Current study aimed to evaluate the effect of different decontamination procedures on micro-shear bond strength (μSBS) of sound (SoD) and caries-affected dentin (CAD) of two universal adhesives after blood-saliva contamination. Methods: One hundred and eighty bovine anterior teeth were prepared and allocated into the respective groups according to tested dentin substrates [SoD, CAD], universal adhesives [Clearfil Bond Universal Quick (UBQ), All-Bond-Universal (ABU)], adhesive contamination stage [none, contamination before and after adhesives light-curing], and according to decontamination procedures [no decontamination, water rinsing, adhesive rebond, Ethylenediaminetetraacetic acid (ETDA) and chlorhexidine (CHX) application]. Universal adhesives were applied according to manufacturer instructions in self-etch (SE) bonding mode. Four composite microrods were built for each tooth. Specimens were kept in distilled water for 24 hours at 37°C before testing μSBS. Four-way ANOVA and Tukey HSD tests were used for data analysis. Results: A statistically significant difference between contamination stages of both universal adhesives at different decontamination procedures for SoD and CAD. Highest μSBS was recorded for UBQ control group at SoD, while the least was recorded for light-cured ABU upon water rinsing decontamination procedure of CAD. Conclusions: Proper cavity isolation is mandatory to avoid possible contamination which can dramatically affect μSBS. CHX is a potent cavity decontaminant that can restore different dentin substrates bond strength. EDTA presents a promising substitute. UBQ adhesive showed better bonding performance than ABU to both dentin substrates. Application of regular cavity decontamination approaches is highly advised in daily practice to avoid possible detrimental effect of accidental cavity contamination. [ABSTRACT FROM AUTHOR]

Copyright of Revista de Ciencias Médicas de Pinar del Río is the property of Editorial Ciencias Medicas and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista de Ciencias Médicas de Pinar del Río is the property of Editorial Ciencias Medicas and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Acta Odontologica Latinoamericana: AOL is the property of Acta Odontologica Latinoamericana and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Bioactive glasses have been recommended for the occlusion of dentinal tubules in treating cervical dentin hypersensitivity. This study evaluates an in vivo model of dentin exposure, and tests the efficacy of bioglass treatments. Thirty male Wistar rats received gingival recession surgery on the upper left first molar. The treatments were applied over the surface of the exposed dentin every 4 days for 28 days. The groups were as follows: Naive; Gingival recession; Cavity varnish; Biosilicate®; Strontium bioglass; and Potassium bioglass. Changes in the dentin-pulp complex, and the presence of substance P, were evaluated through hematoxylin-eosin and immunohistochemical staining. The groups had similar results. Teeth with exposed dentinal tubules in rats showed a typical pattern in the dentin-pulp complex and immunotracing for substance P. The materials did not cause pulp damage. The effects of gingival recession and open dentinal tubules on pulp tissue require further clarification. [ABSTRACT FROM AUTHOR]

Objectives: This study tested the ability of bioactive pastes containing niobophosphate and 45S5 glasses to reduce dentin permeability and to obliterate dentinal tubules, as a mean of reducing human dentin hypersensitivity. Materials and methods: Experimental pastes with concentrations of 10, 20, and 30 wt% of two bioactive glasses (45S5 or niobophosphate [NbG]) were formulated. A paste without bioactive glass (placebo) and a commercial paste (Nano P, FGM) were used as controls. Forty dentin disc specimens were obtained from caries-free extracted third human molars and divided in 8 groups (n = 5). Percentage of permeability (%Lp) was assessed in a dental permeability machine considering hydraulic conductance, immediately after pastes application and at day 7, day 14, and day 21. The precipitates formed on the surface of the dentin discs (and dentinal tubules) were analyzed by SEM/EDS and micro-Raman spectra. Data of dentin permeability (%) 2-way repeated-measures (ANOVA) and Holm-Sidak post-tests (α = 0.05). Dentinal tubule obliteration was visually (and elemental) evaluated and descriptively reported. Results: The experimental bioactive glass pastes containing NbG and 45S5, regardless of the concentration, reduced dentin permeability in comparison with pastes without bioactive glasses (P < 0.05). The formulated placebo and commercial paste did not reduce permeability over time (P < 0.05). SEM/EDS and micro-Raman analyses showed that both type of bioactive pastes (NbG or 45S5-based) presented mineral precipitates obliterating the dentinal tubules at day 21. NbG seems to offer a better initial effect than 45S5, while at 21 days there is no difference between both glasses. Conclusion: Experimental bioactive pastes containing NbG and 45S5 (at concentrations of 10%, 20%, or 30%) have potential to reduce dentin permeability (over time) in comparison with pastes without bioactive glasses; and this occurs on behalf of obliteration of dentinal tubules by microparticle and precipitate formation. Clinical relevance: Bioactive pastes containing NbG and 45S5 may benefit patients presenting dentin hypersensitivity, because these pastes can start acting fast after application and maintain their action up to 21 days. [ABSTRACT FROM AUTHOR]

This study aimed to comparatively evaluate the shear bond strength (SBS) of a universal adhesive to contaminated/non-contaminated dentin when applied with three different protocols. One-hundred-eighty dentin samples were divided randomly into 12 groups (n=15). The groups were created by combining four dentin contamination conditions (non-contaminated or contaminated with blood, hemostatic, or blood+hemostatic) with three application protocols for Single Bond Universal (no-preconditioning or preconditioning with the 35% phosphoric or 1% gallic acid). Following thermal cycling, the SBS test was performed. Data were analyzed using twoway- ANOVA and Tukey's HSD (p<0.05). Dentin surfaces subjected to phosphoric acid, gallic acid, or hemostatic were examined using scanning electron microscope (SEM) analysis. SBS results were influenced by both the dentin contamination (p<0.001) and application protocol (p<0.001). A significant interaction was found between the two factors (p=0.005). The highest bonding performance to contaminated dentin--at all contamination conditions--was achieved with the gallic acid preconditioning. [ABSTRACT FROM AUTHOR]

Purpose: To assess the efficacy of Er,Cr:YSGG lasers in reducing dentine hypersensitivity (DH). Methods: Electronic literature were searched through various databases (MEDLINE, SCOPUS, ProQuest, LILACS and EBSCO) up to March 2022 for articles addressing the following focused question: "In patients with dentine hypersensitivity, does an Er,Cr:YSGG laser provide a better outcome in terms of pain reduction than other dentine desensitizer agents?". The literature was searched using combinations of the following medical subject heading (MeSH) terms and [ABSTRACT FROM AUTHOR]

Background: To compare the mean mineral density (MMD) and examine the remineralization of carious dentin after cavity disinfection with chlorhexidine gluconate (CHX) and restoration with high viscosity glass ionomer cement (H-GIC) in vitro. Methods: Selective caries removal to leathery dentin was performed in 40 extracted primary molars. The samples were scanned using micro-computed tomography (micro-CT) to determine the MMD baseline and randomly divided into 4 groups (n = 10): Equia™ group, applied dentin conditioner and restored with H-GIC (Equia Forte™), CHX-Equia™ group, disinfected the cavity with 2% CHX before applying dentin conditioner and restored with H-GIC (Equia Forte™), Ketac™ group, restored with H-GIC (Ketac Universal™) and CHX-Ketac™ group, disinfected the cavity with 2% CHX before restored with H-GIC (Ketac Universal™). The samples underwent micro-CT scanning post-restoration and post-pH-cycling to determine their respective MMDs. One sample from each group was randomly selected to analyze by scanning electron microscopy (SEM). Results: The MMD gain in the 4 groups post-restoration was significantly different between the Equia™ and CHX-Ketac™ groups (oneway ANOVA with Post hoc (Tukey) test, P = 0.045). There was a significant difference in MMD gain post-restoration between the Equia™ and CHX-Equia™ groups (Independent t-test, P = 0.046). However, the Ketac™ and CHX-Ketac™ group's MMD were similar. The SEM images revealed that the CHX-Ketac™ group had the smallest dentinal tubule orifices and the thickest intertubular dentin among the groups. However, the CHX-Equia™ group had thicker intertubular dentin than the Equia™ group. Conclusion: Applying 2% CHX on demineralized dentin enhances the remineralization of the dentin beneath the restoration. [ABSTRACT FROM AUTHOR]

Dentin hypersensitivity (DH) is characterized by pain caused by an external stimulus on exposed dentin. Different therapeutic approaches have been proposed to mitigate this problem; however, none of them provide permanent pain relief. In this study, we synthesized and characterized experimental bioactive glasses containing 3.07 mol% SrO or 3.36 mol% K2O (both equivalent to 5 wt% in the glass), and evaluated their effect on dentin permeability to verify their potential to treat DH. The experimental materials were characterized by field‐emission scanning electron microscopy, Fourier transform infrared spectroscopy, micro‐Raman spectroscopy, and X‐ray diffraction to confirm the respective structures and chemical compositions. The reduction in the hydraulic conductance of dentin was evaluated at the three stages: minimum permeability; maximum permeability (24% ethylenediaminetetraacetic acid [EDTA] treatment); and final dentin permeability after treatment with the bioactive glasses. They all promoted a reduction in dentin permeability, with a significant difference for each sample and posttreatment group. Also, a significant reduction in dentin permeability was observed even after a simulated toothbrushing test, demonstrating effective action of these materials against DH. Besides, incorporating 3.07 mol% SrO was a positive factor. Therefore, strontium's desensitizing and re‐mineralizing properties can be further exploited in bioactive glasses to promote a synergistic effect to treat DH. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the effect of electric current application on the resin composite-tooth bond strength and hybrid layer of three adhesive systems light-cured by two light-curing units (LCUs). Materials and methods: Human molar teeth were distributed into 12 groups (n=6). Three adhesive systems were used: two-step etch-and-rinse (SB2; Adper Single Bond 2, 3M ESPE); two-step self-etch (CSE; Clearfil SE Bond, Kuraray); and one-step self-etch (SBU; Single Bond Universal, 3M ESPE) applied with (50μA) and without (control; conventional application) electric current, and light-cured with different LCUs. Resin composite blocks (Filtek Z350XT, 3M ESPE) were produced and cut into sticks (~1mm2) for microtensile bond strength (μTBS). Fracture patterns were analyzed on stereomicroscope and classified as cohesive-dentin, cohesive-resin, adhesive, or mixed. Specimens were prepared for scanning electron microscope observation. The hybrid layer analysis was carried out using a confocal laser scanning microscopy (n=2). Data were submitted to three-way ANOVA followed by Tukey's post hoc test (α=0.05). Results: The electric current increased the μTBS for all adhesive systems light-cured with single-emission peak and multiple-emission peak LCUs. Both LCUs presented similar μTBS values. CSE applied under electric current showed the highest μTBS mean values. The adhesive failure pattern was more frequently observed in all groups. The electric current formed long resin tags for all adhesive systems. Conclusions: The adhesive systems applied under electric current increased the bond strength using single-emission peak and multiple-emission peak LCUs. Clinical relevance: Electric current at 50μA applied throughout the dentin is a safe mode and results in better impregnation of the adhesive systems. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the influence of phosphoric acid etching, metal primer or silane coupling agent application on dentin bonding performance of a 2-step self-etch adhesive system. Human dentin surfaces were prepared and divided into four groups depending on the pre-treatment method: no pretreatment (Clearfil SE Bond 2, CONTROL); 40% phosphoric acid (K-Etchant GEL, K); metal primer (Alloy Primer, AP); or silane coupling agent (Porcelain Bond Activator, PB). The specimens were sectioned into beams, separated into 2 subgroups (n=20): no thermocyling or thermocycled (TC), and subjected to a µTBS test and an acid-base challenge for SEM observation. Statistically lower results were observed between K and AP groups, PB and CONTROL, and PB with/without TC (p<0.05). SEM images at the dentin-adhesive interface revealed that all groups produced an acid-base resistant zone (ABRZ), with a funnel-shaped erosion under the ABRZ for the K group. [ABSTRACT FROM AUTHOR]

Objectives: To produce a novel injectable treated dentin matrix hydrogel (TDMH) to be used as a novel pulp-capping agent for dentin regeneration compared with Biodentine and MTA. Materials and methods: Thirty intact fully erupted premolars scheduled to be extracted for orthodontic reasons were included. Pulps were mechanically exposed in the middle of the cavity floor. TDMH was composed of TDM powder (500-μm particle size) and sodium alginate as an injectable scaffold. The capped teeth were divided into three equal groups (n = 10): TDMH, Biodentine, and MTA respectively. Clinical examination and assessment of periapical response were performed. The teeth were extracted after 2-weeks and 2-month intervals, stained with hematoxylin-eosin, and categorized by using a histologic scoring system. Statistical analysis was performed using chi-square and Kruskal-Wallis test (p = 0.05). Results: All teeth were vital during observation periods. Histological analysis after 2 months showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between groups. However, the formed dentin was significantly thicker with the TDMH group with layers of well-arranged odontoblasts that were found to form a homogenous tubular structure with numerous dentinal tubule lines showing a positive trend to dentin regeneration. Conclusions: TDMH could achieve dentin regeneration and conservation of pulp vitality and might serve as a feasible natural substitute for silicate-based cements in restoring in vivo dentin defect in direct pulp-capping procedure. Trial registration: PACTR201901866476410 [ABSTRACT FROM AUTHOR]

Copyright of Acta Odontologica Latinoamericana: AOL is the property of Acta Odontologica Latinoamericana and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An important factor for successful composite restorations is the development of sealed enamel and dentin margins. The efficacy of self-adhering flowable composite in improving marginal adaptation or reducing microleakage is not fully understood. Also the performance of self-adhering flowable composite at different clinical situations was not proofed. The purpose of this review was to evaluate existing evidence to verify the ability of self-adhering composite to provide durable sealed composite restorations and to summarize available evidences as permanent restorative material based on the results of original scientific full-length papers from peer-reviewed journals listed in PubMed from January 2005 to January 2020. The current literature describes promising results of using a self-adhering composite as alternative of conventional resin composite. However, none of the published results describe an application technique or materials of choice that achieved a homogeneous and tight marginal seal. Also available data from clinical researches did not provide solid recommendations to use it as an option for specific clinical situations. Self-adhering composite restorations can be used as alternative to flowable composite. Also, the results of these studies will help guide new studies that can provide insights regarding important factors and effects related to the performance of these new materials. [ABSTRACT FROM AUTHOR]

This study aimed to determine the role of the 10-methacryloyloxydecyl dihydrogen phosphate (MDP) in dentin bond durability of universal adhesive in etch-&-rinse mode through bond strength tests after different degradation conditions. This study used the MDP-containing universal adhesive, Clearfil Universal Bond Quick (CU), and an experimental adhesive (NM) made with the same ingredients as CU, excluding MDP. Shear bond strength (SBS) to dentin were obtained in etch-&-rinse mode with or without MDP. CU in self-etch mode was used as a comparison. The groups were divided into three types: 1) subjected to thermal cycling; 2) subjected to long-term water storage; and 3) stored in water for 24 h, as a baseline. The discrepancies in the mean SBS of the CU and NM groups become prominent with prolonged degradation periods. This study indicates that the MDP in universal adhesive might play a key role in enhancing dentin bond quality even when etch-&-rinse mode is used. [ABSTRACT FROM AUTHOR]