Search

Objective: The aim of the study was to evaluate the influence of Er:YAG laser irradiation on the debonding of metal and ceramic brackets and enamel damage ex vivo., Background Data: The principle of safe bracket debonding is to degrade the adhesive resin strength connecting the tooth and bracket. Removal of adhesive resin from tooth surfaces without iatrogenic damage (enamel loss) is generally the main problem of the otherwise very successful method of aesthetic straightening of teeth., Methods: Forty ceramic and metal brackets (Clarity™ Advanced and Victory Series™; 3M Unitek, Monrovia, CA) were standardly bonded to buccal polished enamel surfaces of 30 caries-free human third molars. Two types of adhesive resins (Transbond™ XT Light Cure Adhesive; 3M Unitek, and Variolink II Professional Set; Ivoclar Vivadent AG) were used. Before debonding, the brackets in the laser group were irradiated with the Er:YAG laser (FJFI CVUT) 280 mJ, 250 μs long, repetition rate 6 Hz, spot focus 1 mm, and 140 sec. The control group was debonded without the laser irradiation. During the bracket irradiation, temperature changes inside the tooth were monitored using a thermal image infrared camera. The enamel surface was investigated by SEM., Results: It has been observed that bracket removal was easier after the Er:YAG laser irradiation, and temperature rise was limited (from 2.0°C to 3.2°C) also for metal brackets. As against the nonirradiated samples, SEM investigation has confirmed no damage to enamel., Conclusions: Irradiation with Er:YAG laser radiation before debonding of ceramic brackets significantly decreases the bonding failure and amount of remaining adhesive.

Objective: The aim of this study was to prepare a simple and reliable method for ceramic bracket debonding, ensuring minimal changes in the enamel structure and an acceptable temperature rise in the pulp., Background Data: Ceramic bracket debonding is based on the principle of degrading the strength of adhesive resin between the tooth and ceramic bracket. The search for a safe and efficient method of adhesive resin removal following debonding has resulted in the introduction of a wide range of instruments and procedures, among which proper use of laser irradiation can be promising., Methods: The debonding of two types of ceramic brackets utilized a diode-pumped Thulium:Ytterbium-Aluminium-Perovskite (Tm:YAP) microchip laser generating irradiation at a wavelength of 1998 nm (spot size 3 mm; focused by lens), with two power settings (1-2 W). Loss of enamel and residual resin on teeth, as well as rise in temperature inside the tooth were subsequently investigated in detail., Results: A 1W power of irradiation during a 60-sec period resulted in a temperature rise from 3 to 4°C in the approximate root location. This power is also suitable for debracketing from the point of view of damage to enamel lying below the bracket. Only a slight damage to the enamel was registered by SEM compared to conventional bracket removal., Conclusions: Use of a Tm:YAP laser (wavelength 1998 nm, power 1 W, irradiance 14 W/cm(2), interacting time 60 sec) which is at the same time compact and small enough to be used in the dental practice, together with moderate cooling, could be an efficient tool for debracketing.