Search

Purpose: To evaluate the effect of three different curing protocols based on different ratios of self-curing and light-curing periods on the bond strength and nanoleakage of fiber posts luted with dual-curing self-adhesive cements., Materials and Methods: A total of 48 single-root teeth were endodontically treated and obturated, and an 8-mm post space was prepared with dedicated drills. Specimens were randomly divided into two groups according to the self-adhesive cement employed: group 1 (G1) = PANAVIA SA Plus (Kuraray Noritake), and group 2 (G2) = Bifix SE (VOCO). The specimens were further divided into three subgroups (n = 8 each) according to the light-curing protocol applied: no light-curing (SG1), 20 seconds of light-curing 20 seconds after cement injection (SG2), and 20 seconds of light-curing 120 seconds after cement injection (SG3). Slices of 1-mm thickness were prepared for the pushout test and nanoleakage analyses of the coronal and apical regions after 24 hours of storage in artificial saliva. Results were statistically analyzed with three-way ANOVA and Tukey post hoc tests. Statistical significance was set for P < .05., Results: Three-way ANOVA analysis showed that the factors of cement (P = .02) and curing protocol (P < .001) had a significant influence on bond strength. Tukey post hoc test reported that light-curing 120 seconds after injection showed higher bond strength compared to both no light-curing and photoactivation after 20 seconds., Conclusion: To achieve the highest bond strength with self-adhesive cements, photoactivation with a 120-second delay after mixing is required. There is no difference between light-curing immediately and light-curing 20 seconds after mixing.

The aim of this in vitro study was evaluate the effect of application of synthetic hydroxyapatite on fiber post bond strength to radicular dentine. Forty, single-root teeth were endodontically treated and an 8 mm post space was prepared. Specimens were randomly placed in four groups (n = 10 in each) and treated using the following fiber post luting procedures: group 1, 17% EDTA + Panavia SA; group 2, 17% EDTA + Teethmate Desensitizer + Panavia SA; group 3, All-Bond Universal + Duo-Link Universal; and group 4, All-Bond Universal + Teethmate Desensitizer + Duo-Link Universal. Fiber posts were luted in the post space and light-cured for 120 s using a light-emitting diode (LED) lamp. After 7 d of storage at 37°C, the teeth were cut into 1-mm-thick slices, which were subjected to a push-out test until failure using a universal testing machine. Two specimens per group were prepared for scanning electron microscopy analysis. An energy-dispersive X-ray spectroscopy detector was used for elemental analysis of the specimen surface. The results were statistically analyzed using one-way anova. The fiber post bond strength was statistically significantly increased after the application of Teethmate Desensitizer to post space walls, either with a 10-MDP-containing self-adhesive cement or with a universal adhesive. Scanning electron microscopy and EDAX analysis showed that Teethmate Desensitizer created a calcium phosphate precipitate over post space dentinal tubules, which significantly improved the bond strength of the fiber post luted with 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing adhesive systems., (© 2016 Eur J Oral Sci.)

Purpose: To evaluate the influence of operator experience on adhesive technique and to assess the clinical performances of two different adhesive systems., Methods: 90 cervical lesions in 42 subjects, with a mean age of 52.4 years (range between 32-63) were selected. Lesions were divided into two groups according to operator experience (n = 42 restorations performed by a skilled operator, n = 48 restorations performed by five unexperienced operators) and further divided into two subgroups according to the adhesive system used: three-step etch-and-rinse (Optibond FL) or one step self-etch (G-Bond). Adhesives were applied according to manufacturers' instructions. Subjects underwent follow-up at 12, 24, and 36 months and restoration retention, enamel and dentin marginal integrity, marginal discoloration, caries occurrence, post-operative sensitivity, and preservation of tooth vitality were evaluated according to USPSH criteria. ANOVA test was performed to evaluate the influence of the adhesive system, the operator experience, and aging on restorations., Results: Operator experience (expert vs. inexperienced), aging time (12, 24, or 36 months), and the adhesive system (self-etch vs. etch-and-rinse) all affected the results statistically, as did the interaction between the adhesive system and operator experience.

Introduction: A coronal seal is fundamental for a positive outcome to endodontic therapy. In this in vitro study, we evaluated the adaptation of composite resins in postendodontic restorations using optical coherence tomographic (OCT) imaging. Our null hypothesis was that there would be no difference in marginal adaptation to the pulp chamber floor between resin composites of different viscosities., Methods: Thirty intact upper molars extracted for periodontal reasons were selected, endodontically treated, and filled with gutta-percha. The excess gutta-percha was entirely removed from the pulp chamber floor, and teeth were randomly divided into 3 groups (n = 10) according to the material used for the restoration: group 1: 0.5-mm horizontal layer of flowable composite followed by nanohybrid composite, group 2: bulk layering of bulk fill flowable composite; and group 3: oblique layering of nanohybrid composite. The degree of adaptation to the cavity floor was assessed using OCT imaging, and images were analyzed with the software program ImageJ (National Institutes of Health, Bethesda, MD) to assess the marginal gap between the composite and the pulp chamber floor. Collected data were statistically analyzed using analysis of variance testing, and statistical significance was set at P < .05., Results: Flowable composites showed significantly better adaptation than traditional packable nanohybrid composites (P < .05). All significant differences were found between groups 1 and 2., Conclusions: Within the limitations of this OCT imaging-based in vitro study, it was concluded that the flowable composite (flow + nanofilled; flow bulk fill composite) adapted better to the pulp chamber floor than the packable nanohybrid composite resin. Further studies are necessary to confirm these results., (Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

The aim of this in-vitro study was to evaluate the bond strength of fiber posts cemented in a root canal filled using various root-canal obturation techniques. A total of 33 monoradicular samples, treated endodontically, were randomly assigned to three groups according to the root-canal obturation technique: group 1, continuous-wave technique; group 2, plastic-obturator-core technique; and group 3, cross-linked gutta-percha obturator-core technique. Fiber posts were luted in each sample and each was sectioned perpendicular to the post axis. The push-out test was performed using a universal machine and the maximum failure load was recorded in MPa mm(-2) . Several samples were randomly chosen for scanning electron microscopy evaluation. The mean debris and dentinal tubule-opening scores were calculated separately in the coronal and apical portions. Bond strength was significantly higher in group 1 than in groups 2 and 3. Debris scores were significantly higher in the apical portion of groups 2 and 3 than in group 1. Within the limitations of this study it can be affirmed that thermoplasticized alpha gutta-percha seemed to worsen the cleaning of post-space walls and hence reduced fiber-post bond strength., (© 2014 Eur J Oral Sci.)

Statement of Problem: The choice of restorative method is commonly based on the cavity configuration and the residual number of cavity walls. However, the residual wall thickness could be a valuable clinical parameter in the choice of restoration for endodontically treated teeth., Purpose: The fracture resistance of endodontically treated premolars was compared with different wall thicknesses restored with direct composite resin with and without cuspal coverage and with and without fiber post insertion., Material and Methods: This study included 104 intact human maxillary premolars extracted for periodontal or orthodontic reasons. Standardized mesio-occluso-distal cavities were prepared with different palatal wall thicknesses (1.5, 2, and 2.5 mm) and a buccal wall thickness of 2 mm. Teeth were restored with or without a fiber post and with or without cuspal coverage. Specimens were subjected to thermocycling (3000 cycles, 5 to 55°C) and embedded in polymerized acrylic resin. Teeth were submitted to cyclic fatigue followed by a static fatigue test with a universal testing machine; a compressive force was applied 30 degrees to the long axis of the teeth until fracture. The results were statistically analyzed by 3-way ANOVA (α=.05)., Results: Residual wall thickness (P=.004), the type of adhesive restoration (P<.001), and fiber post insertion (P<.001) significantly influenced the fracture resistance of endodontically treated premolars., Conclusions: In specimens with a cavity wall thickness >2 mm, direct intracuspal composite resin restorations supported by a fiber post achieved comparable fracture resistance. With a residual wall thickness <2 mm, only cuspal coverage with or without a fiber post provided satisfactory fracture resistance., (Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.)

The aim of this study was to evaluate the bond strength of fiber posts luted with a one-step self-etching adhesive with the push-out test after phosphoric acid conditioning of the root dentin. Thirty-six single-rooted teeth were endodontically treated. Teeth were sectioned perpendicularly to the cementoenamel junction, and a 10-mm post space was prepared with a calibrated bur. Specimens were then divided into three groups according to the adhesive protocol: A, total-etch three steps; B, self-etch one step; and C, 32% phosphoric acid conditioning and self-etch one step. Fiber posts were luted with self-curing resin-based cement. Teeth were cut in 1-mm slices and pushed until failure with an Instron machine. Results were statistically analyzed with the ANOVA and Bonferroni tests (P < .05). Two additional specimens from each group were examined under the scanning electron microscope (SEM). The 32% phosphoric acid significantly influenced the push-out bond strength of fiber posts luted with self-etch adhesives (P < .05). SEM analysis showed a continuous hybrid layer with resin tags and lateral branches in groups A and C, while group B showed smear layer dissolution with poor infiltration of the tubules.