Search

Purpose: This study aimed to investigate the electrochemical behavior of commercially pure titanium (grade II) coupled with type IV gold alloy and nickel-chromium alloy at different surface area ratios in 3 different electrolytes., Materials and Methods: Titanium was coupled with gold (Ti/Au) and nickel-chromium (Ti/Ni-Cr). For each couple, 9 surface area ratios between titanium and gold or nickel-chromium were prepared. The electrolytes used were 1% lactic acid, tryptic soy broth media, and Streptococcus mutans culture supernatant. The corrosion polarization curves were obtained, and average values of corrosion potential and corrosion current density were calculated., Results: Both Ti/Au and Ti/Ni-Cr were affected by surface area ratios and different electrolytes, showing the least corrosion rate when the ratio was 1:1 and when the lactic acid was used as an electrolyte., Conclusions: The greater the difference in surface area between titanium and restorative materials, the more corrosive behavior the materials show. The existence of bacteria such as S mutans may aggravate corrosive behavior between different metals.

Background: When a dissimilar couple is exposed to corrosive environment, it will normally exhibit a galvanic corrosion. The galvanic corrosion might be influenced by various factors, including type and concentration of electrolyte, surface area ratio between anode and cathode, type of coupling material, and coupling manner., Purpose: The purpose of this study was to investigate and compare the galvanic corrosion behavior of commercially pure titanium when coupled with type IV Au alloy, Au-Ag-Pt alloy, and Ag-Au-Pd alloy by different coupling methods., Materials and Methods: Couples were prepared by a laser welding or a mechanical adhering method. Electrochemical corrosion studies were conducted in a Ringer's solution at a scanning rate of 0.1 mV/sec in a range from -250 mV to +250 mV with respect to E(OCP). Corrosion parameters (E(OCP), I(CORR), E(CORR)) were obtained., Results: It was found that (i) there was a significant difference between LWC and AJC for three couples (p<0.05), (ii) the crevice line caused all three couples more corrosive than weld joint line, (iii) for both joint, it was found that type (IV) Au alloy exhibited discoloration to some extent., Conclusions: It is concluded that among the three couples with two different coupling methods, Ti/Ag-Au-Pd couple exhibited best corrosion resistance in a room temperature Ringer's solution.

Microbiology-related corrosion has been noted in industry for many years. It is widely recognized that microorganisms affect the corrosion of metal and alloys immersed in aqueous environments. Under similar conditions, the effect of bacteria in the oral environment on the corrosion of dental metallic materials remains unknown. The purpose of this study is to investigate the corrosion behavior of dental metallic materials in the presence of Streptococcus mutans and its growth byproducts. Samples were commercially pure titanium (CPT), Ti-6Al-4V (TAV), Ti-Ni (TN), Co-Cr-Mo alloy (CCM), 316L stainless steel (SSL), 17Cr-4Ni PH-type stainless steel (PH), and Ni-Cr alloy (NC). Using Gamry corrosion test system, surfaces were exposed to (1) sterilized Ringer's solution as a control for (2), (2) S. mutans mixed with sterilized Ringer's solution; (3) sterilized tryptic soy broth as a control for (4), and (4) byproducts of S. mutans mixed with sterilized tryptic soy broth. Corrosion parameters (EOCP, ECORR, ICORR, etc.) were corrected for all tested samples. Averaged values of these parameters were statistically analyzed by t-test to identify significant differences. It was concluded that (1) S. mutans reduced the EOCP of CPT, TAV, TN, and SSL, and the byproducts of S. mutans reduced the EOCP of TAV, TN, SSL, and PH. (2) S. mutans increased the ICORR of PH, and byproducts of S. mutans increased the ICORR of all the samples. (3) S. mutans reduced the ECORR of CPT, TAV and TN, and the byproducts of S. mutans reduced the ECORR of TN, SSL, PH, and NC. (4) S. mutans increased the IPASS of CPT, and the byproducts of S. mutans increased the IPASS of CPT, PH, and NC.

Statement of Problem: Two varieties of unalloyed titanium, Ti-6Al-4V and NiTi, commonly are used in medical and dental fields. Several other types of alloys for potential use in these fields have been developed, including Ti-4.5Al-3V-2Mo-2Fe and vanadium-free alloys (Ti-5Al-2.5Fe and Ti-5Al-3Mo-4Zr). The corrosion of these alloys under simulated physiologic conditions is not known. Purpose. This study compared the corrosion behaviors of 6 titanium materials through electrochemical polarization tests in 37 degrees C Ringer's solution., Material and Methods: The applied voltage was potentiostatically scanned from -0.6 to 1.0 V. From polarization curves, the corrosion rate (averaged over 3 samples) for each alloy was calculated and compared with that of other alloys. Analysis of variance (ANOVA) and the Student-Newman-Keuls multiple range test were performed at a 95% overall confidence level to identify statistically significance differences in corrosion rates. Surface oxide films were identified by electron diffraction, and the electrolyte medium was analyzed by atomic absorption spectrophotometry after each alloy was tested., Results: Commercially pure titanium and Ti-5Al-2.5Fe were the most resistant to corrosion; Ti-5Al-3Mo-4Zr, Ti-6Al-4V, and NiTi were the least resistant to corrosion. NiTi exhibited pitting corrosion along with transpassivation., Conclusion: Electron diffraction patterns indicated that all titanium alloys were covered mainly with rutile-type oxide (TiO(2)) after corrosion tests. The oxides that formed on Ti-5Al-2.5Fe were identified as a mixture of TiO(2) and Ti(9)O(17), and those that formed on NiTi were identified as a mixture of TiO(2) and Ni(2)Ti(4)O.