Search

Tablets, compression coated with certain polysaccharides and intended for colon delivery, retain the integrity of the coat for an initial period of about 6 h (lag period) beyond which (post-lag period) the coat is degraded by colonic enzymes to induce drug release. This work was undertaken to investigate the factors which influence the integrity of the coat during the lag period. Core tablets containing two model drugs were compression coated with various amounts of carboxymethyl locust bean gum (CMLBG). In-vitro release of drugs, erosion of coat, and steady shear viscosity of CMLBG solutions having different concentrations and solution pH were determined. The viscosity of CMLBG that depended primarily on CMLBG concentration and partly on solution pH was responsible for erosion and integrity of the coat in the lag period. Evaluation of polymer viscosity could describe the integrity of coat of a polysaccharide coated tablet in the lag period.

Herein, an aqueous solution of etherified locust bean polysaccharide (ELBP) containing lamivudine was reticulated in presence of trivalent aluminium (Al 3+ ) ions to nanoscale level (43.82–197.70 nm) by surfactant assisted homogenization-reticulation technique. The variation in aluminium chloride (AlCl 3 ) strength (1.5–3.5% (w/v)) and drug:ELBP weight ratio (0.11–0.43) affected the properties of the nanoreticulations. Regardless of the variables, a maximum of ∼44% drug entrapment efficiency was noted. In simulated intestinal fluid (phosphate buffer solution, pH 7.4), the drug release rate was inversely proportional to the strength of AlCl 3 ; but followed a proportional relationship with the drug:ELBP ratio. The mechanism of drug release shifted from Fickian diffusion to anomalous transport as the salt strength was increased above 2.5% (w/v). At intermediate drug:ELBP ratio, the drug release rate was regulated by polymer chain relaxation as opposed to simple diffusion mechanism. Fourier transform infrared spectroscopy did not show any evidence of chemical interaction between the drug and ELBP. Thermal analysis and X-ray diffraction studies suggested amorphous dispersion of drug in the nanoreticulations. Thus, the nanoreticulations were expected to absorb via intestine and phagocytosed by the virus-infected hepatic macrophages and hence could be useful for controlled delivery of lamivudine avoiding dose-dependent toxicity of the drug.

Development and evaluation of xanthan gum-facilitated ethyl cellulose microsponges for controlled percutaneous delivery of diclofenac sodium In this study, xanthan gum-facilitated ethyl cellulose microsponges were prepared by the double emulsification technique and subsequently dispersed in a carbopol gel base for controlled delivery of diclofenac sodium to the skin. Scanning electron microscopy revealed the porous, spherical nature of the microsponges. Increase in the drug/polymer ratio (0.4:1, 0.6:1, 0.8:1, m/m) increased their yield (79.1-88.5 %), drug entrapment efficiency (50.0-64.1 %), and mean particle diameter (181-255 μm). Compared to the microsponges with high drug/polymer ratio (0.8:1, m/m), the flux of entrapped drug through excised rat skin decreased by 19.9 % and 17.0 %, respectively, for the microsponges prepared at low and intermediate drug/polymer ratios. When an equivalent amount of pure drug (not entrapped into microsponges) was dispersed into the gel base and the flux was compared, the microsponges (drug/polymer ratio 0.8:1, m/m) were found to reduce the flux by 33.3 %. Whether the drug was dispersed either in un-entrapped or entrapped form into the gel base, the drug permeation through rat skin followed Higuchi's diffusion kinetic model. The microsponges prepared at the lowest drug/polymer ratio exhibited a comparatively slower drug permeation profile and were hence considered most suitable for controlled drug delivery application. FTIR spectroscopy and DSC analyses indicated the chemically stable, amorphous nature of the drug in these microsponges. The gel containing these optimized microsponges was comparable to that of a commercial gel formulation and did not show serious dermal reactions. Hence, the microsponge system obtained at the lowest drug/polymer ratio could be useful for controlled release of diclofenac sodium to the skin.

The purpose of the study was to develop a multiunit sustained release dosage form of diltiazem hydrochloride using a natural polymer, sodium carboxymethyl xanthan gum and polyethyleneimine (PEI) from a completely aqueous environment. PEI treated diltiazem resin complex loaded beads were characterized by morphology, drug entrapment efficiency, in vitro and in vivo release behaviour. 40% and 80% drug was released in 2 hour in pH 1.2 and in 5 to 6 h in pH 6.8 respectively depending on the formulation variables. The prolonged release was attributed to decreased swelling of the beads due to PEI treatment. Maintaining the shape throughout the dissolution process, PEI treated diltiazem resin complex beads released the drug following non-Fickian transport phenomena. In vivo pharmacokinetic evaluation in rabbits shows slow and prolonged drug release when compared with diltiazem solution. The designed beads are suitable for prolonged release of a water soluble drug under a complete aqueous environment using natural gum.

In this study, carboxymethyl derivative of locust bean gum was prepared, characterized, and its gelling ability with different concentrations (1-5% w/v) of aluminum chloride (AlCl(3)) was utilized for the development of glipizide-loaded beads in a completely aqueous environment. The beads were spherical when observed under a scanning electron microscope. Increase in gelling ion concentration decreased the drug entrapment efficiency from 97.68% to 95.14%. The beads swelled more slowly in pH 1.2 KCl-HCl buffer and exhibited a slower drug release pattern than that observed in pH 7.4 phosphate buffer. Irrespective of the dissolution media, the drug release became slower at higher AlCl(3) concentration. The drug release in alkaline medium was found to be controlled by a combination of diffusion as well as polymer relaxation phenomena. Comparing the release profiles, it was observed that the beads treated with 5% AlCl(3) provided slower drug release up to 10 h in alkaline medium without any sign of disintegration and, thus, this formulation was selected for further studies. Fourier transform infrared (FTIR) spectroscopy indicated the stable nature of the drug in the beads. Differential scanning calorimetry and X-ray diffraction analysis showed that most of the drug remained in amorphous state in the beads. Stability study indicated no statistical significant difference in drug entrapment efficiency of the beads. In vivo activity of the beads was tested and a prolonged hypoglycemic effect was achieved. Hence, carboxymethyl locust bean beads could be a potential carrier for controlled oral delivery of glipizide.

Diltiazem hydrochloride (DTZ) matrix tablets were prepared using polyacrylamide-grafted sodium alginate (PAam-g-SA) co-polymers having different percentages of grafting and their partially hydrolyzed products with a view to achieve sustained release of the highly water-soluble drug. PAam-g-SA co-polymers having different percentages of grafting were synthesized by free radical polymerization using acrylamide (Aam) as monomer and ammonium persulphate (APS) as initiator, and the resulting co-polymers were subjected to alkaline hydrolysis to produce their corresponding partially hydrolyzed co-polymers. Matrix tablets of DTZ were prepared by wet granulation using either PAam-g-SA co-polymers or partially hydrolyzed PAam-g-SA co-polymers. The effect of percentage grafting, drug load and calcium gluconate (CG), used as excipient, was studied in simulated gastrointestinal fluid. While the tablets prepared using the co-polymer having higher percentages of grafting provided faster drug release (100% in 5.5 h), the tablets prepared with the corresponding hydrolyzed co-polymer released the drug slowly (71% in 12 h). This behaviour in release appeared to be controlled by the relative magnitude of the viscosity and the swelling capacity of the copolymers. Moreover, increase in drug load tended to decrease the drug release from all types of tablets and increase in the amount of CG increased the drug release. FT-IR and DSC studies revealed the absence of any interaction between the drug and the co-polymers. The matrix tablet made of partially hydrolyzed graft co-polymer having the highest percentage of grafting provided the most sustained release of the drug.

In this study, periodate oxidation of sodium alginate was controlled such that the oxidized alginate could form isolatable beads with Ca(+2) ions. The beads of oxidized alginate having a degree of oxidation 1 mol%, entrapped 89% flurbiprofen and released almost all of its content within 1.5 h in pH 7.2 phosphate buffer solution. The beads were covalently crosslinked with adipic dihydrazide (ADH) in addition to ionic crosslinks and were characterized. Scanning electron microscopy revealed that the beads were spherical having smooth surfaces. The drug entrapment efficiency decreased (90-86%) with increasing concentration of ADH (2-6% w/v) in the gelation medium. However, the beads prolonged the drug release in alkaline dissolution medium up to 8 h depending upon the concentration of ADH. The beads prepared with 2% ADH swelled more rapidly and led to faster drug release in either pH 1.2 HCl solution or pH 7.2 phosphate buffer solution. The swelling tendencies were reduced and the drug release became slower with higher concentrations in either fluid. The drug diffusion from the beads followed super case II transport mechanism. FTIR spectroscopy indicated stable nature of flurbiprofen in the beads and therefore had potential as sustained oral delivery system for the drug.

Bovine serum albumin (BSA)-loaded carboxymethyl xanthan (CMX) microparticles were prepared following gelation of sodium carboxymethyl xanthan (SCMX) gum with different concentrations (1-5%) of aluminium chloride (AlCl3). The microparticles prepared using 1% AlCl3 were subsequently coated with 0.5% aqueous solution of either SCMX gum or sodium alginate. Both uncoated and coated microparticles were characterized for entrapment efficiency, surface morphology, particle size, in vitro release and protein stability. The uncoated microparticles became non-spherical and the mean diameter was found to increase with increasing AlCl3 concentration. Higher concentration of AlCl3 decreased BSA entrapment efficiency of the uncoated microparticles from 86-61%. Furthermore, BSA entrapment in coated microparticles was found lower (78-79%) than uncoated microparticles prepared using 1% AlCl3. Although, the uncoated microparticles released almost half of its content in NaCl-HCl buffer solution (pH 1.2) in 2 h, the alginate and xanthan coated microparticles did not liberate a substantial amount of entrapped protein within the same period and prolonged the release in PBS solution (pH 7.4) up to 10 and 12 h, respectively. The microparticles released the protein via diffusion and swelling of the polymer matrix. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that BSA integrity was well retained in the CMX microparticles.

Novel pH-sensitive hydrogel beads were prepared using a hydrolyzed poly(acrylamide-g-xanthan) (PAAm-g-XG) copolymer from a complete aqueous environment and evaluated for targeting ketoprofen to the intestine. The PAAm-g-XG copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The copolymer was characterized by FTIR spectroscopy, (1)H NMR spectroscopy, elemental analysis and thermogravimetric analysis. Pulsatile swelling study indicated that the copolymer exhibits considerable pH-sensitive behavior unlike pristine xanthan gum. Ketoprofen-loaded pH-sensitive beads were prepared by ionotropic gelation with Al(3 + ) ions. Release of drug from all the copolymeric beads was much lesser than that from pristine xanthan beads. Moreover, a maximum of 20% ketoprofen was released from the copolymeric beads in pH 1.2-5.5 during a period of 3 h, while a major portion of the drug was released in pH 6.8-7.4 gradually over a longer period. Pharmacodynamic activity and stomach histopathology of albino rats indicated that the beads were able to retard the drug release in stomach, and gastric side effects such as ulceration, hemorrhage and erosion of gastric mucosa were diminished when the drug was entrapped into PAAm-g-XG-based pH-sensitive beads.

The major aims of the present study were (1) to select a multiple-unit formulation that matched the in vitro dissolution profile of single-unit sustained-release commercial capsules, (2) to compare the sustaining/controlling efficacy of the selected multiple-unit formulation with that of the single-unit commercial conventional tablet and sustained-release capsules, and (3) to determine whether an in vitro-in vivo correlation exists for single- and multiple-unit formulations. Ibuprofen (20%-60% wt/wt)-loaded multiple-unit polystyrene microparticles were prepared by an emulsion-solvent evaporation method from an aqueous system. The in vitro release profiles obtained in phosphate buffer of pH 6.8 for drug-loaded polystyrene microparticles and for commercial sustained-release capsules (Fenlong-SR, 400 mg) were compared. Since the microparticles with 30% ibuprofen load showed a release profile comparable to that of the Fenlong-SR release profile, the microparticles with this drug load were considered to be the optimized/selected formulation and, therefore, were subjected to stability study and in vivo study in human volunteers. A single-dose oral bioavailability study revealed significant differences in C(max), T(max), t(1/2a), t(1/2e), K(a), K(e), and AUC between the conventional tablet and optimized or Fenlong-SR capsule dosage forms. However, all the parameters, with the exception of K(a) along with relative bioavailability (F) and retard quotient (R(Delta)), obtained from the optimized ibuprofen-loaded microparticles were lower than that obtained from the commercial Fenlong-SR formulation. Furthermore, linear relationship obtained between the percentages dissolved and absorbed suggests a means to predict in vivo absorption by measuring in vitro dissolution.

Ibuprofen-loaded polystyrene microparticles were prepared by the emulsion-solvent evaporation process from an aqueous system. The effects of different parameters on the drug content and on the release of the drug from the microparticles were investigated. The drug content, in all the formulations, was less than the theoretical drug loading. The lower drug content was due to drug partitioning to the external aqueous phase during formulation. Statistical analysis revealed that the variation in the concentrations of the emulsion stabilizer and the organic disperse phase volume did not significantly alter the release of the drug. Although an increase in drug loading increased drug release from the microparticles, a biphasic linear relationship was observed between the time required for 50% drug release and the drug loading. The effect of size of the microparticles on drug release was more important for the low drug-loaded microparticles than that for the high drug-loaded microparticles. Such release behaviour from the microparticles was explained on the basis of the morphological structure of the microparticles.

On many occasions, homopolysaccharide hydrogel networks alone are not suitable for controlled drug delivery. In this study, interpenetrating networks (IPNs) of sodium alginate (ALG) and etherified locust bean gum (ELBG) were developed through ionotropic gelation with Al(3+) ions, tested for glipizide release, and were compared with homopolymer hydrogel networks. The degree of reticulation in IPNs was explained by the neutralization equivalent, tensile strength measurement, and drying kinetics of drug-free hydrogels. IPNs afforded a maximum of 94.40 ± 0.35% drug entrapment efficiency and exhibited slower drug release profiles up to 8 h. Al(3+)-ALG network almost completed the release of embedded drug in 3.5 h; however, the homopolymer Al(3+)-ELBG network discharged their content at a slow, uniform rate up to 8 h like the IPNs. All the networks appeared spherical under scanning electron microscope. In all cases, a faster drug release rate was assumed in phosphate buffer (pH 7.4) than in KCl/HCl buffer (pH 1.2) solution. The pH-responsive swelling of the beads was responsible for the variable drug release rate in different media. NonFickian diffusion mechanism was operative for the transport of drug from the IPNs. Moreover, IPNs gained appreciation for their better mechanical strength (63.79 ± 1.59 MPa) than Al(3+)-ELBG network. Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, and X-ray diffraction analyses indicated a compatible environment for drug encapsualtion and release from the IPNs. The drug release curves of Al(3+)-ELBG and IPNs were found similar to a reference product. Hence, Al(3+)-ELBG and IPNs could be useful in controlling diabetes over longer periods.

Local antimicrobial delivery is a potential area of research conceptualized to provide alternative and better methods of treatment for cases, as osteomyelitis where avascular zones prevent the delivery of drugs from conventional routes of administration. Drug-loaded polymers and calcium phosphates as hydroxyapatites have been tried earlier. Bioactive glasses are bone-filling materials used for space management in orthopedic and dental surgery. A new bioactive glass (SSS2) was synthesized and fabricated into porous scaffold with a view to provide prolonged local delivery of gatifloxacin and fluconazole as suitable for the treatment of osteomyelitis. The new SSS2 was characterized by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. In addition, the bioactivity of the SSS2 glass and resulting scaffold was examined by in vitro acellular method and ascertained by FTIR and XRD. The pore size distribution was analysed by mercury intrusion porosimetry and the release of drugs from scaffolds were studied in vitro. The glass and the resulting scaffolds were bioactive indicating that they can bond with bone in vivo. The scaffolds were porous with pores predominantly in the range of 10-60 µm, released the drugs effectively for 6 weeks and deemed suitable for local delivery of drugs to treat osteomyelitis.

Interpenetrating network (IPN) hydrogel membranes of sodium alginate (SA) and poly(vinyl alcohol) (PVA) were prepared by solvent casting method for transdermal delivery of an anti-hypertensive drug, prazosin hydrochloride. The prepared membranes were thin, flexible and smooth. The X-ray diffraction studies indicated the amorphous dispersion of drug in the membranes. Differential scanning calorimetric analysis confirmed the IPN formation and suggests that the membrane stiffness increases with increased concentration of glutaraldehyde (GA) in the membranes. All the membranes were permeable to water vapors depending upon the extent of cross-linking. The in vitro drug release study was performed through excised rat abdominal skin; drug release depends on the concentrations of GA in membranes. The IPN membranes extended drug release up to 24 h, while SA and PVA membranes discharged the drug quickly. The primary skin irritation and skin histopathology study indicated that the prepared IPN membranes were less irritant and safe for skin application.

Xanthan gum (XG), a trisaccharide branched polymer and poly vinyl alcohol (PVA), was used to develop pH-sensitive interpenetrating network (IPN) microspheres by emulsion cross-linking method in the presence of glutaraldehyde as a cross-linker to deliver model anti-inflammatory drug, diclofenac sodium (DS) to the intestine. Various formulations were prepared by changing the ratio of XG:PVA, extent of cross-linking in order to optimize the formulation variables on drug encapsulation efficiency, and release rate. Formation of interpenetrating network and the chemical stability of DS after penetration of microspheres was confirmed by Fourier Transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis were done on the drug loaded microspheres which confirmed molecular dispersion of DS in the IPN. Microspheres formed were spherical with smooth surfaces, as evidenced by scanning electron microscopy (SEM), and mean particle size, as measured by laser light scattering technique ranged between 310.25-477.10 microm. Drug encapsulation of up to 82.94% was achieved as measured by UV method. Both equilibrium and dynamic swelling studies and in vitro release studies were performed in pH 1.2 and 6.8. Release data indicated a Fickian trend of drug release which depends on the extent of cross-linking and the ratio of XG:PVA present in the microsphere. When subjected to in vivo pharmacokinetic evaluation in rabbits, microparticles show slow and prolonged drug release when compared with DS solution. Based on the results of in vitro and in vivo studies it was concluded that these IPN microspheres provided oral controlled release of water-soluble DS.

Novel interpenetrating network hydrogel beads of sodium carboxymethylcellulose and egg albumin loaded with a lipid lowering drug, simvastatin, were prepared by ionotropic gelation and covalent cross-linking method. The IPN beads were characterized by differential scanning colorimetric analysis, X-ray diffractometry to understand the crystalline nature of the drug after entrapment into IPN matrix. Fourier transform infrared spectroscopy was used to find the chemical stability of drug in the polymer matrix and scanning electron microscopy was performed to study the surface morphology. The ionically cross-linked beads were capable of releasing drug up to 7 h, whereas the drug release was extended up to 12 h in case of dual cross-linked beads. The beads which were prepared with higher concentration of glutaraldehyde released the drug more slowly. The release data were fitted to an empirical equation to determine the transport mechanism, which indicated the non-Fickian trend for drug transport.

Alginate matrix tablet of diltiazem hydrochloride (DTZ), a water-soluble drug, was prepared using sodium alginate (SAL) and calcium gluconate (CG) by the conventional wet granulation method for sustained release of the drug. The effect of formulation variables like SAL/CG ratio, drug load, microenvironmental pH modulator, and processing variable like compression force on the extent of drug release was examined. The tablets prepared with 1:2 w/w ratio of SAL/CG produced the most sustained release of the drug extending up to 13.5 h. Above and below this ratio, the drug release was faster. The drug load and the hardness of the tablets produced minimal variation in drug release. The addition of alkaline or acidic microenvironmental modulators did not extend the release; instead, these excipients produced somewhat faster release of diltiazem. This study revealed that proper selection of SAL/CG ratio is important to produce alginate matrix tablet by wet granulation method for sustained release of DTZ.

Slow release testosterone-loaded nanocapsules in alginate, biodegradable hydropolymer, were prepared by in situ nanoemulsion-polymer crosslinking approach. Different formulations varying in the drug loading solvent phase were prepared. Four different drug-loading solvents were assayed and the food grade hexane provided nanocapsules testosterone load of 30%. Testosterone loading was confirmed by FT-IR, DSC and quantitated by HPLC. Prepared nanocapsules appeared spherical with a dense drug core in transmission electron microscopy studies. Hydrodynamic diameter of nanocapsules was 34.5 +/- 1.7 nm, with a Gaussian distribution and the zeta potential -5.0 meV. Sustained diffusive drug release was observed in vitro, following zero order kinetics releasing the drug payload over a period of 48 hours. Embedding testosterone in alginate provided sustained release. Different drug loading solvents have distinct influence on drug loading and nanocapsules size distribution. The nanocapsulation technique developed can be a good choice for the development of different sustained steroid hormonal drug carriers.

Novel pH-sensitive carboxymethylcellulose-(polyacrylamide-grafted-sodium alginate) interpenetrating network (IPN) hydrogel beads loaded with ketoprofen were prepared using ionotropic gelation and covalent crosslinking method. Polyacrylamide-grafted-sodium alginate (PAAm-g-SA) copolymer was synthesized by free radical polymerization using ammonium persulfate (APS) as free radical initiator under the nitrogen atmosphere followed by hydrolysis using sodium hydroxide. The grafting, alkaline hydrolysis and crosslinking reactions were confirmed by Fourier transform infrared spectroscopy (FTIR). Beads were characterized by differential scanning calorimetric (DSC) analysis, thermogravimetric analysis (TGA), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The mechanical properties of the prepared IPNs were investigated. The erosion was observed with the beads containing only ionic crosslinks whereas it was negligible with the beads containing both ionic and covalent crosslinks. The swelling of the beads and drug release was significantly increased when pH of the medium was changed from acidic to alkaline (P

The objective of this study is to select a multiple-unit sustained-release formulation and to compare it with both commercial immediate and single unit sustained-release capsules and also to determine whether an in vitro-in vivo correlation exists for single- and multiple- unit formulations. Indomethacin (20-60% w/w)-loaded, multiple-unit polystyrene microparticles were prepared by emulsion-solvent evaporation method from an aqueous system. The in vitro release profiles obtained in phosphate buffer of pH 6.8 for drug-loaded polystyrene microparticles and for commercial sustained-release capsules (Indocap-SR, 75 mg) were compared. As the microparticles with 50% indomethacin load showed a release profile comparable to that of the Indocap-SR release profile, the microparticles with this drug load was considered as optimized/selected formulation and, therefore, was subjected to stability study and in vivo study in human volunteers. In spite of significantly higher C(max), Ka, and Ke, and lower T(max), t1/2a, t1/2e and AUC(0 --infinity)) values observed with commercial Microcid immediate-release capsules, there was no sign of difference among the listed parameters between optimized microparticles and Indocap-SR capsules. Indeed, the values of retard quotient (Rdelta) calculated from half-value duration analysis did not show any statistical difference, indicating the occurrence of an almost same degree of retardation of drug release from the optimized microparticles and the Indocap-SR capsules. Furthermore, linear relationship obtained between the percentages dissolved and absorbed suggests a means to predict in vivo absorption by measuring in vitro dissolution. The results suggest that the optimized polystyrene microparticles could provide an alternative controlled-release drug delivery system for indomethacin.

Osteomyelitis, an inflammatory process accompanied by bone destruction, is caused by infective microorganisms. The high success rates of antimicrobial therapy by conventional routes of administration in controlling most infectious diseases have not yet been achieved with osteomyelitis for several reasons. Local and sustained availability of drugs have proven to be more effective in achieving prophylactic and therapeutic outcomes. This review introduces osteomyelitis--its prevalence and pathogenesis, the present options for drug delivery and their limitations, and the wide range of carrier materials and effective drug choices, with major focus on the pharmaceutical concepts involved in drug delivery system design and development. With increasing numbers of orthopedic surgeries and the advent of combination devices that provide support and deliver drugs, local drug delivery for osteomyelitis is a topic of importance for both social and commercial interests.

The objective of this study was to develop a multiunit sustained release dosage form of diltiazem using a natural polymer from a completely aqueous environment. Diltiazem was complexed with resin and the resinate-loaded carboxymethyl xanthan (RCMX) beads were prepared by interacting sodium carboxymethyl xanthan (SCMX), a derivatized xanthan gum, with Al(+3) ions. The beads were evaluated for drug entrapment efficiency (DEE) and release characteristics in enzyme free simulated gastric fluid (SGF, HCl solution, pH 1.2) and simulated intestinal fluid (SIF, USP phosphate buffer solution, pH 6.8). Increase in gelation time from 5 to 20 min and AlCl(3) concentration from 1 to 3% decreased the DEE respectively from 95 to 79% and 88.5 to 84.6%. However, increase in gum concentration from 1.5 to 2.5% increased the DEE from 86.5 to 90.7%. The variation in DEE was related to displacement of drug from the resinate by the gel forming Al(+3) ions. While 75-82% drug was released in 2 h in SGF from various beads, 75 to 98% drug was released in 5 hour in SIF indicating the dependence of drug release on pH of dissolution media. Although the beads maintained their initial integrity throughout the dissolution process in both media, as evident from scanning electron microscopic studies, the faster release in SGF was accounted for higher swelling of the beads in SGF than in SIF. When release data (up to 60%) was fitted in power law expression, the drug release was found to be controlled by diffusion with simultaneous relaxation phenomena.

Xanthan gum (XG) was derivatized to sodium carboxymethyl xanthan gum (SCMXG) and then cross-linked with aluminium ions (Al(+3)) to prepare BSA-loaded microparticles (MPs) from a completely aqueous environment. The derivatized gum was characterized by various physical methods. Discrete and spherical BSA-loaded MPs were obtained from SCMXG solution, the pH of which was adjusted to 6 and 7 and the BSA entrapment efficiency was found to reach as high as 82%. The protein release in acidic dissolution medium was faster than that in alkaline dissolution medium and was accounted for the higher swelling ratio of the MPs in acidic environment. Moreover, the pH of the gum solution used to prepare the MPs also influenced the swelling and consequently protein release considerably.

Furosemide-loaded calcium alginate (ALG), calcium alginate-polyethyleneimine (ALG-PEI) and alginate-coated ALG-PEI (ALG-PEI-ALG) beads were prepared by ionotropic/polyelectrolyte complexation method to achieve controlled release of the drug. Effects of several formulation factors on the characteristics of the beads were investigated. Although variation in formulation factors did not influence the drug-loading efficiency (DLE) of ALG beads, rapid release of the drug in simulated intestinal fluid (SIF) could not be prevented. PEI treatment of ALG beads, however, prolonged the drug release considerably. Ionic interaction, as appeared from FTIR studies, between alginate and PEI led to the formation of polyelectrolyte complex membrane, the thickness of which was dependent on the conditions of PEI treatment as demonstrated by scanning electron microscopy (SEM). The membrane acted as a physical barrier to drug release from ALG-PEI beads. Alginate coating of ALG-PEI beads further prolonged the release of the drug by increasing membrane thickness and reducing swelling of the beads possibly by blocking the surface pores. Differential scanning calorimetry (DSC) study indicated that drug was not degraded by PEI treatment. The release data from ALG-PEI beads showed a good fit in power law expression, whereas the release data from ALG-PEI-ALG beads were found to fit in modified power law expression, and the mechanism of drug release changed from super case II transport to nearly Fickian transport, depending on the degree of gelation and formation of polyelectrolyte complex membrane.

The objective of this investigation is to develop a multi-unit sustained release dosage form of a water soluble drug from a completely aqueous environment avoiding the use of any organic solvent. The drug was complexed with resin and calcium alginate or polyethyleneimine-treated calcium alginate beads loaded with the resinate were prepared by a ionic/polyelectrolyte complexation method. The effect of different formulation variables on the characteristics of the beads was investigated. Although the drug release from spherical and smooth-surfaced calcium alginate beads in both acidic and alkaline dissolution media were slower than those obtained from plain resinate, none of the variables were found to prolong the drug release considerably due to rapid swelling and disintegration of calcium alginate beads in alkaline medium. On the other hand, drug release from polyethyleneimine-treated calcium alginate beads in acidic medium did not increase appreciably following a burst release. However, in alkaline medium, the drug release was found to increase gradually and extend over a different period of time depending on the intensity of polyethyleneimine treatment. Scanning electron micrographs revealed the formation of a dense membrane around the resinate-loaded calcium alginate matrix. The membrane appeared to be responsible for reduced swelling and protracted disintegration of the beads resulting in slow release of the drug. The results indicate that sustained release of a water soluble drug from polyethyleneimine-treated calcium alginate beads could be achieved by adjusting the formulation variables.