Search

Deep‐red and near‐infrared emitters with twisted donor–acceptor (D–A) structures often exhibit suboptimal performance in organic light‐emitting diodes (OLEDs) due to constraints imposed by the energy gap law. In this work, a pure hydrogen carbon (PHC) host material named SBF‐DTP is purposefully tailored for deep‐red OLEDs. The excellent capacity of SBF‐DTP to support D–A type DR emitters effectively arises from its distinctive attributes: localized excitation states, 3D configuration, and low polarity. When employing SBF‐DTP as the host for the fluorescence emitter DCPA‐TPA and the thermally activated delayed fluorescence emitter APDC‐DTPA, doped films exhibit substantially enhanced photoluminescence quantum yields. This improvement leads to high‐efficiency OLEDs with external quantum efficiencies of 5.47% for DCPA‐TPA and 20.03% for APDC‐DTPA, respectively, which is about twice as high as the initial reports. This findings underscore the paramount significance of developing efficient host materials in the pursuit of high‐performance deep red and even near‐infrared OLEDs. [ABSTRACT FROM AUTHOR]

The current availability of multi‐resonance thermally activated delayed fluorescence (MR‐TADF) materials with excellent color purity and high device efficiency in the deep‐blue region is appealing. To address this issue in the emerged nitrogen/carbonyl MR‐TADF system, we propose a spiro‐lock strategy. By incorporating spiro functionalization into a concise molecular skeleton, a series of emitters (SFQ, SOQ, SSQ, and SSeQ) can enhance molecular rigidity, blue‐shift the emission peak, narrow the emission band, increase the photoluminescence quantum yield by over 92 %, and suppress intermolecular interactions in the film state. The referent CZQ without spiro structure has a more planar skeleton, and its bluer emission in the solution state redshifts over 40 nm with serious spectrum broadening and a low PLQY in the film state. As a result, SSQ achieves an external quantum efficiency of 25.5 % with a peak at 456 nm and a small full width at half maximum of 31 nm in a simple unsensitized device, significantly outperforming CZQ. This work discloses the importance of spiro‐junction in modulating deep‐blue MR‐TADF emitters. [ABSTRACT FROM AUTHOR]

Conformational engineering is essential to further reinforce the luminescent properties of thermally activated delayed fluorescence (TADF) materials featuring through‐space charge transfer (TSCT) characteristics. Herein, two TSCT‐TADF emitters (8MeDM‐B and 8FDM‐B) with the methyl and fluorine moieties substituted at the C8 site of the rigid spiro‐fluorene bridge is reported. Derivation of the C8 site is first proposed to control the molecular configuration with the ability to indirectly tune the intramolecular interaction between donor and acceptor groups. As a result, 8MeDM‐B and 8FDM‐B both present small singlet‐triplet energy gaps, fast reverse intersystem crossing rates, and high photoluminescence quantum yields. Interestingly, the smaller fluorine atom not the bigger methyl group exhibits more evident electrostatic repulsive force onto the central donor and thus rectifies the central spiro structure. Consequently, the high external quantum efficiency values of 28.8% and 31.7% for 8MeDM‐B and 8FDM‐B‐based electroluminescence devices are achieved, respectively. This study offers a measure for enhancing TSCT‐TADF emitters without directly modifying the donor or acceptor. [ABSTRACT FROM AUTHOR]

Carbonyl‐containing derivatives show enduring vitality in the field of thermally activated delayed fluorescence (TADF) materials; they can realize high device efficiency by using both singlet and triplet excitons for electroluminescence. Recently, a system based on fused ketone/amine exhibited huge potential for constructing multi‐resonance TADF (MR‐TADF) emitters, which exhibit higher narrow‐band emission than conventional TADF emitters with twisted donor‐acceptor (D‐A) structure. Herein, we summarize current research progress in both traditional and MR‐type ketone derivatives with TADF characteristics for introducing the molecular design strategy of maintaining high device efficiency while keeping narrow‐band emission profile. We hope this review can inspire the emergence of more high‐performance narrow‐band materials. [ABSTRACT FROM AUTHOR]

Organic materials with multi‐stimulus response (MSR) properties have demonstrated many potential and practical applications. Herein, a π‐stacked thermally activated delayed fluorescence (TADF) material with multi‐stimulus response (MSR) properties, named SDMAC, was designed and synthesized using distorted 9,9‐dimethyl‐10‐phenyl‐9,10‐dihydroacridine as a donor. SDMAC possesses a rigid π‐stacked configuration with intramolecular through‐space interactions and exhibits aggregation‐induced emission enhancement (AIEE), solvatochromic, piezochromic, and circularly polarized luminescence (CPL) under different external stimuli. The rigid molecular structure and efficient TADF properties of SDMAC can be used in displays and lighting. Using SDMAC as an emitter, the maximum external quantum efficiency (EQE) of the fabricated organic light‐emitting diodes (OLEDs) is as high as 28.4 %, which make them the most efficient CP‐TADF OLEDs based on the through‐space charge transfer strategy. The CP organic light‐emitting diodes (CP‐OLEDs) exhibit circularly polarized electroluminescence (CPEL) signals. [ABSTRACT FROM AUTHOR]

The employment of thermally activated delayed fluorescence (TADF) emitters is one of the most promising ways to realize the external quantum efficiency (EQE) of over 25% for organic light-emitting diodes (OLEDs). In addition, the TADF emitter based on oxygen-bridged boron (BO) fragment can maintain blue emission with high color purity. Herein, we constructed two blue TADF emitters, 3TBO and 5TBO, for OLEDs application. Both emitters consist of three donors linked at the oxygen-bridged boron acceptor. OLED devices based on 3TBO and 5TBO exhibited both high excellent device efficiency and high color purity with a maximum EQE; full-width at half-maximum (FWHM); and CIE coordinates of 17.3%, 47 nm, (0.120, 0.294), and 26.2%, 57 nm, (0.125, 0.275), respectively. [ABSTRACT FROM AUTHOR]

Multi‐layer π‐stacked emitters based on spatially confined donor/acceptor/donor (D/A/D) patterns have been developed to achieve high‐efficiency thermally activated delayed fluorescence (TADF). In this case, dual donor moieties and a single acceptor moiety are introduced to form two three‐dimensional (3D) emitters, DM‐BD1 and DM‐BD2, which rely on spatial charge transfer (CT). Owing to the enforced face‐to‐face D/A/D pattern, effective CT interactions are realized, which lead to high photoluminescence quantum yields (PLQYs) of 94.2 % and 92.8 % for the two molecules, respectively. The resulting emitters exhibit small singlet–triplet energy splitting (ΔEST) and fast reverse intersystem crossing (RISC) processes. Maximum external quantum efficiencies (EQEs) of 28.0 % and 26.6 % were realized for devices based on DM‐BD1 and DM‐BD2, respectively, which are higher than those of their D/A‐type analogues. [ABSTRACT FROM AUTHOR]

Near‐infrared exciplex can weaken molecular design difficulties, and has the advantage of easy bathochromic‐shift spectra via selecting the suitable electron donors and acceptors. In this contribution, exciplex is applied to fabricate near‐infrared (NIR) organic light‐emitting diodes (OLEDs) incorporating a synthesized fluorescent material 3‐([1,1″:3′,1″‐terphenyl]‐5′‐yl)acenaphtho[1,2‐b]pyrazine‐8,9‐dicarbonitrile (APDC‐tPh) and a commercially available material 4,4′,4″‐tris(carbazol‐9‐yl)triphenylamine (TCTA). The device having a mixed TCTA:APDC‐tPh as an emitting layer shows a 730 nm NIR emission with a maximum external quantum efficiency (EQE) of about 0.1%, while the device having 2‐[4‐(diphenylamino)phenyl]‐10,10‐dioxide‐9H‐thioxanthen‐9‐one (TXO‐TPA):APDC‐tPh as the emitting layer exhibits an emission peak of 704 nm with a maximum EQE of 1.27%. These results prove the feasibility of fabricating the efficient exciplex‐based NIR OLEDs. [ABSTRACT FROM AUTHOR]

Herein, two orange-red emitters, 3,6-bis(9,9-dimethylacridin-10(9H)-yl)-9H-fluoren-9-one (DMAC-FO) and 3,6-di(10H-SP[acridine-9,9′-fluoren]-10-yl)-9H-fluoren-9-one (SPAC-FO), based on fluorenone have been designed and synthesized. As compared to the widely reported benzophenone acceptor, fluorenone has deeper lowest unoccupied molecular orbital (LUMO) because of its more conjugated skeleton and thus it can red-shift the emission maximum. The molecular simulation exhibits both emitters has separated highest occupied molecular orbitals (HOMOs) (@donors) and LUMOs (@acceptor), indicating they could act as thermally activated delayed fluorescence (TADF) materials which are further confirmed by the transient spectra. Consequently, external quantum efficiencies (EQEs) of 10.0% for DMAC-FO and 14.2% for SPAC-FO are achieved in the organic light-emitting diodes (OLEDs). Image 1 • Two orange-red emitters, DMAC-FO and SPAC-FO, based on fluorenone have been designed and synthesized. • TADF properties were realized in DMAC-FO and SPAC-FO due to the highly twisted structure. • High EQEs of 10.0% for DMAC-FO and 14.2% for SPAC-FO were achieved in OLEDs. [ABSTRACT FROM AUTHOR]

Full width at half maxima (FWHM), ketone derivatives, multi-resonance thermally activated delayed fluorescence (MR-TADF), narrow-band, organic light-emitting diodes (OLEDs) Keywords: full width at half maxima (FWHM); ketone derivatives; multi-resonance thermally activated delayed fluorescence (MR-TADF); narrow-band; organic light-emitting diodes (OLEDs) EN full width at half maxima (FWHM) ketone derivatives multi-resonance thermally activated delayed fluorescence (MR-TADF) narrow-band organic light-emitting diodes (OLEDs) 1 1 1 01/27/23 20230124 NES 230124 B The molecular modification strategies b for maintaining both high efficiency and narrow-band profiles are highlighted by a review of the progress in iterations of carbonyl-containing thermally activated delayed fluorescence (TADF) molecules from conventional TADF emitters with twisted donor-acceptor structures to multi-resonance TADF molecules with fused skeletons. Frontispiece: Carbonyl-Containing Thermally Activated Delayed Fluorescence Emitters for Narrow-Band Electroluminescence. [Extracted from the article]

Multiple resonances induced thermally activated delayed fluorescence (MR‐TADF) has great advantages in high color purity display. Up to now, current MR‐TADF emitters are only based on the boron‐nitrogen‐containing fragment. Reported herein is a novel class of MR‐TADF emitter, quinolino[3,2,1‐de]acridine‐5,9‐dione (QAO), realized by the opposite resonance effect of the carbonyl and the nitrogen atoms, which is also the smallest TADF emitter reported so far. The QAO‐based pure blue organic light‐emitting diode achieves a maximum external quantum efficiency (EQEmax) of 19.4% with a small full width at half maximum of 39 nm. Moreover, tert‐butyl modified QAO can be employed as an efficient electron acceptor to construct an efficient yellow‐green evaporation and solution process feasible TADF emitter, 7‐(tert‐butyl)‐3,11‐bis(9,9‐dimethylacridin‐10(9H)‐yl)quinolino[3,2,1‐de]acridine‐5,9‐dione (QAO‐DAd), with significantly improved performance as compared to the previous flexible diketone‐based emitters. A novel class of multiple resonance induced thermally activated delayed fluorescence (MR‐TADF) emitter (QAO) is developed, by using the opposite resonance effect of the carbonyl group and the nitrogen atom. Moreover, QAO can be employed as an efficient electron acceptor to construct traditional donor–acceptor–donor type TADF emitter, QAO‐DAd, and then achieve high performances in evaporation and solution‐processed devices. [ABSTRACT FROM AUTHOR]

The development of red/near-infrared (NIR) thermally activated delayed fluorescence (TADF) emitters are relatively lagging due to the spin statistics and energy gap law. Herein, we designed and synthesized a new NIR TADF emitter, 3-(4-(9,9′-spirobi[fluorene]-3-yl(phenyl)amino)phenyl)acenaphtho[1,2-b]pyrazine-8,9-dicarboni-trile (SDPA-APDC) , by incorporating a spiro-type electron-donating moiety N , N -diphenyl-9,9′-spirobi[fluorene]-2-amine (SDPA) to an electron-withdrawing unit acenaphtho[1,2- b ]pyrazine-8,9-dicarbonitrile (APDC). The photophysical, electrochemical and thermal properties of SDPA-APDC have been systematically explored. Consequently, the emitter was found high photoluminescence quantum yield (PLQY), narrow bandgap, small singlet-triplet energy gap (Δ E ST) and excellent thermal stability. Furthermore, SDPA-APDC was developed for electroluminescence devices. The doped devices of SDPA-APDC achieved a red emission peak at 696 nm with a maximum external quantum efficiency (EQE) of 10.75%. And the non-doped device exhibited a NIR emission peak at 782 nm with a maximum EQE of 2.55% Image 1 • Designing a near-infrared TADF emitter SDPA-APDC. • The doped and non-doped OLEDs of SDPA-APDC exhibited a maximum external quantum efficiency (EQE) of 10.75% (red emission peak at 696 nm) and 2.55% (NIR emission peak at 782 nm), respectively. • Enriching the design principles of efficient red/NIR TADF emitters based on more different electron donors. [ABSTRACT FROM AUTHOR]

Abstract A new sky-blue thermally activated delayed fluorescent (TADF) emitter TRZ-DCF, has been developed based on 2-(9H-carbazol-9-yl)-7,7-dimethyl-5,7-dihydroindeno[2,1- b ]carbazole (DCF) as donor and 2,4-diphenyl-1,3,5-triazine as acceptor. Due to the fusion of fluorene and carbazole moieties into the single carbazole donor, the multimodified emitter exhibits obvious TADF characteristics with a smaller singlet-triplet splitting (Δ E ST) value of 0.22 eV and relatively high photoluminance quantum yield (PLQY) of 84%. As a result, a maximum external quantum efficiency (EQE) of 18.7%, a current efficiency (CE) of 39.0 cd A−1 and a power efficiency (PE) of 30.5 lm W−1 with a Commission Internationale de L' Eclairage (CIE) coordinates of (0.18, 0.34), significantly surpassing the performance of the reference emitter 9-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9H-carbazole (TRTZ), are achieved in optimal device construction. It is found that the EQE roll-off (20.8%) of TRZ-DCF is acceptable, that the efficiency drops to 14.8% at 1000 cd m−2 in optimal device construction. These results demonstrate the multiple modifications of weak electron-donating carbazole donor is an effective way of constructing high-efficiency blue TADF emitters with small roll-off. Graphical abstract Image 1 Highlights • We present a new sky-blue thermally activated delayed fluorescence emitter combining a novel multimodified carbazole donor moiety with triazine-based unit for efficient organic light-emitting diodes. • The external quantum efficiency (18.7%), singlet-triplet splitting (0.22 eV) and photoluminance quantum yield (84%) as well as the roll-off behavior (20.8%) of the emitter TRZ-DCF have been finely tuned through multiple modification of the reference emitter TRTZ. [ABSTRACT FROM AUTHOR]