Search

Sandwich structures with a soft core typically exhibit multiple deformation modes such as bending, twisting and compression when subjected to transverse loads. Compressive behavior of soft core significantly affects the structural response, which is usually neglected in conventional plate theories. Additionally, conventional plate theories do not take into account transverse shear stress continuity. In order to address this concern and precisely characterize the characteristics of arbitrary multilayer laminated structures, a novel electromechanical coupled finite element model is developed. This model is based on a compressible layerwise third-order shear deformation theory with a soft core. Notably, the proposed model theory requires only twelve degrees of freedom for each quadratic element node. The accuracy of the model is validated first. Afterwards, several numerical investigations are carried out for piezolaminated sandwich structures with different width-to-thickness ratios, reinforcement angle and skew angle. The results demonstrate the applicability of the current model in predicting the behavior of laminated sandwich plates. [ABSTRACT FROM AUTHOR]

Abstract: Variations in tetragonal distortion and the degree of crystallinity of ultrafine BaTiO3 particles—both industrially applied criteria qualifying their polar characteristics—upon growth during annealing were studied on powders, prepared by the hydrothermal synthesis and by the oxalate route respectively. Regardless of the synthetic route both these properties were found to develop approximately to the same extent with increasing primary particle size. The degree of crystallinity was detectable only above a critical value of c/a=1.007 at an average particle size of around 120nm. Intragranular porosity in hydrothermal powders and the stoichiometric Ba/Ti-ratio are of minor influence. However, distinct differences in particle growth behavior for both powders were observed. This discrepancy is ascribed to a special morphology of the hydrothermal product, where enhanced particle growth was found to be governed by oriented attachment of individual crystallites and by the motion of solid–solid interfaces. [Copyright &y& Elsevier]