Search

The characteristics of ion cyclotron range of frequencies (ICRF) minority ion heating with a hydrogen minority and deuterium majority plasma were studied by ICRF modulation injection experiments in the Large Helical Device (LHD). In recent experiments with deuterium plasma, no significant increase in the neutron emission rate due to ICRF second harmonic deuteron heating was observed. Therefore, in this study, the neutron emission rate was used to refer to the information regarding the thermal ion component. Like the results of the observations of the heating efficiencies at various minority proton ratios, the experimental results showed good agreement with the simple model simulation of ICRF wave absorption. During these experiments, the accelerated minority hydrogen ions were observed by neutral particle analyzers. The counting rates of the energetic particles were higher in the lines of sight passing through the helical ripple than across the magnetic axis, and the counting rate decreased as the minority hydrogen ion ratio increased. The dependence of the minority hydrogen ion ratio on the density of the energetic ions was consistent with the experimentally observed heating efficiencies and simulations. The heating efficiency of ICRF minority ion heating could be well explained by simple model simulation in the LHD deuterium experiment. [ABSTRACT FROM AUTHOR]

Ion cyclotron emission (ICE) driven by perpendicular neutral beam-injected (NBI) deuterons, together with the distinctive ICE driven by tangential NBI, have been observed from heliotron–stellarator plasmas in the large helical device (LHD). Radio frequency radiation in the lower hybrid range has also been observed Saito K. et al (2018 Plasma Fusion Res. 13 3402043), with frequency dependent on plasma density. Here we focus on recent measurements of ICE from deuterium plasmas in LHD, which show substantial variation in spectral character, between otherwise similar plasmas that have different local density in the emitting region. We analyse this variation by means of first principles simulations, carried out using a particle-in-cell (PIC) kinetic approach. We show, first, that this ICE is driven by perpendicular NBI deuterons, freshly ionised near their injection point in the outer midplane edge of LHD. We find that these NBI deuterons undergo collective sub-Alfvénic relaxation, which we follow deep into the nonlinear phase of the magnetoacoustic cyclotron instability (MCI). The frequency and wavenumber dependence of the saturated amplitudes of the excited fields determine our simulated ICE spectra, and these spectra are obtained for different local densities corresponding to the different LHD ICE-emitting plasmas. The variation with density of the spectral character of the simulated ICE corresponds well with that of the observed ICE from LHD. These results from heliotron–stellarator plasmas complement recent studies of density-dependent ICE from tokamak plasmas in KSTAR Thatipamula S.G. et al (2016 Plasma Phys. Control. Fusion 58 065003); Chapman B. et al (2017 Nucl. Fusion 57 124004), where the spectra vary on sub-microsecond timescales after an ELM crash. Taken together, these results confirm the strongly spatially localised character of ICE physics, and reinforce the potential of ICE as a diagnostic of energetic ion populations and of the ambient plasma. [ABSTRACT FROM AUTHOR]

The analysis method of the Motional Stark Effect (MSE) diagnostic to measure the rotational transform and current profiles in the Large Helical Device has been improved. This was done by using the Variational Moments Equilibrium Code to calculate an equilibrium database for various pressure profiles and current profiles. This method looks for the radial profile of the rotational transform in the equilibrium database that gives the best fit to the polarization angle profiles measured with the MSE diagnostic. This analysis improves the measurements of rotational transform, especially near the magnetic axis, where the sensitivity of the polarization angle measurements becomes low and the uncertainty due to error in the estimation of the Pfirsch–Schlüter current becomes large. The radial profiles of the rotational transform and current profiles for Electron Cyclotron Current Drive and Neutral Beam Current Drive are obtained in the new analysis method with a sufficiently high accuracy to discuss the discrepancy of the current density profiles between the measurements and the calculations. [ABSTRACT FROM AUTHOR]

Using a handshake shape (HAS) antenna phasing dipole for ion cyclotron heating (ICH), the heating efficiency was higher than that using a previous poloidal array antenna in the Large Helical Device. In order to sustain the dipole operation, real-time feedback for impedance matching and maintaining the same phase and power was adopted during long-pulse discharge. The HAS antenna was designed to reduce parasitic losses associated with energetic particle and radio-frequency (RF) sheath effects by field-aligned current concentration on the midplane. Local hot spots and the inhomogeneity of the diverter heat profile in the toroidal direction were reduced. The long-pulse discharge with an electron density (ne0) of 1 × 1019 m-3, center electron temperature (Te0) of 2.5 keV, a plasma duration time (td) of 19min, and RF heating power (PRF) of 1MW was achieved by ICH and electron cyclotron heating. [ABSTRACT FROM AUTHOR]

As Boron Neutron Capture Therapy (BNCT) grows to become a good alternative for radio-resistant tumours, long preparation and irradiation time limit the number of treatments possible. To resolve this issue, this work aims to propose implementing a compact accelerator-based neutron generator which can provide multiple neutron beams of at least 10 9 /s/cm 2 for multi-port BNCT, while maintaining low gamma and fast-neutron contamination. This study applies a 50 MeV proton beam at a realizable current of 500 μ A from an AVF cyclotron with a W target to sustain a high neutron yield for multiple extractions. A beam shaping assembly (BSA) is also studied to moderate and shape the neutron beam for BNCT. A cylindrical BSA surrounding the W target is proposed to make multiple gates extraction plausible. The BSA consists of a moderator assembly (Fe, Al F 3 and Teflon), Pb reflector, Li thermal neutron filter (TNF), and borated-polyethylene coupled with Pb which act as neutron and gamma shielding. The proposed design managed to deliver about 2 × 10 9 epithermal-neutron/cm 2 /s with satisfactory beam quality at 4 ports for multiple BNCT. Thus, the neutron generator for multi-port BNCT proposed in this study has been proven to be feasible. [ABSTRACT FROM AUTHOR]