Search

The rise in cyanobacterial blooms due to eutrophication and climate change has increased cyanotoxin presence in water. Most current water treatment plants do not effectively remove these toxins, posing a potential risk to public health. This study introduces a water treatment approach using nanostructured beads containing magnetic nanoparticles (MNPs) for easy removal from liquid suspension, coated with different adsorbent materials to eliminate cyanotoxins. Thirteen particle types were produced using activated carbon, CMK-3 mesoporous carbon, graphene, chitosan, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidised cellulose nanofibers (TOCNF), esterified pectin, and calcined lignin as an adsorbent component. The particles' effectiveness for detoxification of microcystin-LR (MC-LR), cylindrospermopsin (CYN), and anatoxin-A (ATX-A) was assessed in an aqueous solution. Two particle compositions presented the best adsorption characteristics for the most common cyanotoxins. In the conditions tested, mesoporous carbon nanostructured particles, P1-CMK3, provide good removal of MC-LR and Merck-activated carbon nanostructured particles, P9-MAC, can remove ATX-A and CYN with high and fair efficacy, respectively. Additionally, in vitro toxicity of water treated with each particle type was evaluated in cultured cell lines, revealing no alteration of viability in human renal, neuronal, hepatic, and intestinal cells. Although further research is needed to fully characterise this new water treatment approach, it appears to be a safe, practical, and effective method for eliminating cyanotoxins from water. [ABSTRACT FROM AUTHOR]

Natural toxins, such as mycotoxins and cyanotoxins, can contaminate food and feed, leading to toxicity in humans and animals. This study focused on using nine magnetic nanostructured agents to remove the main types of toxins. Initially, the efficacy of these materials was evaluated in water solutions, revealing that composites with sizes below 3 mm, containing magnetite, activated carbon, esterified pectin, and sodium alginate, removed up to 90% of mycotoxins and cyanotoxins with an adsorption of 873 ng/g. The application of the nanostructures was then assessed in beer, milk, Distillers Dried Grains with Solubles and water contaminated with cyanobacteria. The presence of matrix slightly decreases the adsorption capacity for some toxins. The maximum toxin removal capacity was calculated with cyanotoxins, composites achieved a removal of up to 0.12 mg/g, while nanocomposites (15 μm) reached 36.6 mg/g. Therefore, these findings point out the potential for using nanotechnology in addressing natural toxins contamination. • A methodology for extracting natural toxins was validated across multiple matrices • The efficacy of ten nanostructures as toxin adsorbents was tested • Nanostructures enable the removal of up to 90% of mycotoxins and cyanotoxins • The maximum adsorption reached was 36.6 mg/g [ABSTRACT FROM AUTHOR]

Marine and freshwater toxins contaminate water resources, shellfish and aquaculture products, causing a broad range of toxic effects in humans and animals. Different core-shell nanoparticles were tested as a new sorbent for removing marine and freshwater toxins from liquid media. Water solutions were contaminated with 20 μg/L of marine toxins and up to 50 μg/L of freshwater toxins and subsequently treated with 250 or 125 mg/L of nanoparticles. Under these conditions, carbon nanoparticles removed around 70% of saxitoxins, spirolides, and azaspiracids, and up to 38% of diarrheic shellfish poisoning toxins. In the case of freshwater toxins, the 85% of microcystin LR was eliminated; other cyclic peptide toxins were also removed in a high percentage. Marine toxins were adsorbed in the first 5 min of contact, while for freshwater toxins it was necessary 60 min to reach the maximum adsorption. Toxins were recovered by extraction from nanoparticles with different solvents. Gymnodinium catenatum , Prorocentrum lima , and Microcystis aeruginosa cultures were employed to test the ability of nanoparticles to adsorb toxins in a real environment, and the same efficacy to remove toxins was observed in these conditions. These results suggest the possibility of using the nanotechnology in the treatment of contaminated water or in chemical analysis applications. • A new green methodology to remove phycotoxins and cyanotoxins was developed. • The efficacy of 2 magnetic nanoparticles as toxin adsorbents was tested. • Nanoparticles allow to remove up to 70% of certain phycotoxins. • Nanoparticles allow to remove up to 85% of certain cyanotoxins. • Toxins can be recovered by extracting nanoparticles with different solvents. [ABSTRACT FROM AUTHOR]