Search

Cyanobacterial harmful algal blooms (cyanoHABs) are becoming increasingly common in aquatic ecosystems worldwide. However, their heterogeneous distributions make it difficult to accurately estimate the total algae biomass and forecast the occurrence of surface cyanoHABs by using traditional monitoring methods. Although various optical instruments and remote sensing methods have been employed to monitor the dynamics of cyanoHABs at the water surface (i.e., bloom area, chlorophyll a), there is no effective in-situ methodology to monitor the dynamic change of cell density and integrated biovolume of algae throughout the water column. In this study, we propose a quantitative protocol for simultaneously measurements of multiple indicators (i.e., biovolume concentration, size distribution, cell density, and column-integrated biovolume) of cyanoHABs in water bodies by using the laser in-situ scattering and transmissometry (LISST) instrument. The accuracy of measurements of the biovolume and colony size of algae was evaluated and exceeded 95% when the water bloom was dominated by cyanobacteria. Furthermore, the cell density of cyanobacteria was well estimated based on total biovolume and mean cell volume measured by the instrument. Therefore, this methodology has the potential to be used for broader applications, not only to monitor the spatial and temporal distribution of algal biovolume concentration but also monitor the vertical distribution of cell density, biomass and their relationship with size distribution patterns. This provides new technical means for the monitoring and analysis of algae migration and early warning of the formation of cyanoHABs in lakes and reservoirs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Prediction of the complex cyanobacteria-environment interactions is vital for understanding harmful bloom formation. Most previous studies on these interactions considered specific properties of cyanobacterial cells as representative for the entire population (e.g. growth rate, mortality, and photosynthetic capacity (Pmax)), and assumed that they remained spatiotemporally unchanged. Although, at the population level, the alteration of such traits can be driven by intraspecific competition, little is known about how traits and their plasticity change in response to environmental conditions and affect the bloom formation. Here we test the hypothesis that intraspecific variations in Pmax of cyanobacteria (Microcystis spp.) play an important role in its population dynamics. We coupled a one-dimensional hydrodynamic model with a trait-based phytoplankton model to simulate the effects of physical drivers (turbulence and turbidity) on the Pmax of Microcystis populations for a range of dynamic conditions typical for shallow eutrophic lakes. Our results revealed that turbulence acts as a directional selective driver for changes in Pmax. Depending on the intensity of daily-periodic turbulence, representing wind-driven mixing, a shift in population-averaged phenotypes occurred toward either low Pmax, allowing the population to capture additional light in the upper layers, or high Pmax, enhancing the efficiency of light utilization. Moreover, we observed that a high intraspecific diversity in Pmax accelerated the formation of surface scum by up to more than four times compared to a lower diversity. This study offers insights into mechanisms by which cyanobacteria populations respond to turbulence and underscores the significance of intraspecific variations in cyanobacterial bloom formation., (© The Author(s) 2024. Published by Oxford University Press on behalf of the International Society for Microbial Ecology.)

A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial blooms and produce clean water in Lake Caohai, a sub-lake of Lake Dianchi (Kunming, China). After treatment with a shipboard RDF and cationic polyacrylamide (CPAM, 0.5-2 mg/L) flocculation, > 95% of cyanobacterial biomass was removed. The chlorophyll-a (Chl-a) concentration and turbidity in the effluent were < 8 μg/L and < 3 NTU, respectively. Nutrient concentrations were also markedly reduced, with a permanganate index (PI) of < 2 mg/L and total phosphorus concentration of < 20 μg/L. The total nitrogen concentration was reduced from 2.75 to 1.65 mg/L, and most of the residual nitrogen was nitrate. Although powerful for the removal of suspended particles and an enhanced water transparency, the combined technology showed no significant reduction in inorganic nutrients and only a slight reduction in dissolved organic matter (DOM). The concentrations of protein and polysaccharide were significantly reduced, while that of humic matter did not change during the process. After flushing with the effluent of the RDF, a 20,000-m 3 enclosure of lake water became clear when the volume of the effluent was 1.8 times that of the water enclosure. The electrical energy per order (EE/O) was calculated to be 0.053kWh/m 3 , which is lower than that of transferring water from more than 10 km away (0.058 kWh/m 3 ). Thus, a shipboard RDF coupled with CPAM flocculation is a promising approach to remove harmful cyanobacterial blooms and improve the water environment of eutrophic lakes., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Cyanobacteria and their toxins present potential hazard to consumers of water from lakes, reservoirs and rivers, thus their removal via water treatment or at the source, is essential. Here, we report that alkyltrimethylammonium (ATMA) surfactants, such as octadecyltrimethylammonium (ODTMA) bromide, act as cyanocides that efficiently inhibit photosynthesis and growth of cyanobacteria. Green algae were found less sensitive than cyanobacteria to ATMA compounds. Fluorescence measurements and microscopic observations demonstrated that cyanobacteria cells (Aphanizomenon or Microcystis) disintegrate and lose their metabolic activity (photosynthesis) upon exposure to ATMA bromides (estimated ED 50(1hr) ranged between 1.5 and 7 μM for ODTMA-Br or hexadecyltrimethylammonium (HDTMA) bromide). Other ATMA compounds, such as tetradecyltrimethylammonium (TDTMA) or dodecyltrimethylammonium (DDTMA) bromides had similar inhibitory effect but their toxicity to cyanobacteria (measured as ED 50(1hr) for photosynthetic efficiency) decreased, as the length of the alkyl chain decreased. All ATMA compounds used in this study showed lower toxicity to green algae than to cyanobacteria. A toxicity mechanism for ATMA cations is proposed, based on real time fluorescence signals and on alteration of cell ultra-structure revealed by electron microscopy. The present study sheds light on the toxic effect of ATMA surfactants on cyanobacteria and its potential application for controlling the occurrence of cyanobacterial bloom in lakes, reservoirs or rivers to secure the safety of drinking water and to mitigate and manage bloom events., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Cyanobacteria of the genus Microcystis produces surface scum that negatively affects water quality in inland waters. This scum layer can be disintegrated and vertically dispersed by external forces (e.g., wind mixing), followed by reformation of surface scum as buoyant Microcystis colonies migrate upward. However, the recovery dynamics of Microcystis surface scum following a strong mixing event have rarely been studied. Here, we used a tank experiment to investigate the process of Microcystis surface scum recovery after a mixing event with focus on dynamics of colonies of different size classes and their contribution to that process. Microcystis colony size distribution and colony volume concentration was measured using a laser in-situ scattering and transmissometry instrument. The dynamics of Microcystis in the water column and upward colony migration velocity were strongly dependent on colony size. Larger colonies (>180 μm) with fast upward migration rates contributed the most to surface scum formation shortly after turbulence subsided. The contribution of slowly migrating smaller colonies to scum formation was observed over notably longer time. The estimated floating velocities of large colonies ranged 0.15 to 0.46 m h -1 depending on colony size and were 5-15 times higher than those of smaller colonies (~0.03 m h -1 ). The changes in colony size distribution of Microcystis in the water column reflect the dynamics of surface scum. Analysis of size distribution of Microcystis colonies can be used for better understanding and prediction of Microcystis surface scum development in water bodies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cyanobacterial surface scum (here defined as visible Cyanobacteria colonies accumulating at the lake surface) is a harmful phenomenon that negatively affects water quality, human and animal health. Colony-forming Microcystis is one of the most important and ubiquitous genera that can suddenly accumulate at water surfaces. Turbulent water motion, e.g., generated by wind, can vertically disperse this scum layer, which later can re-establish by upward migration of Microcystis colonies. However, the role of wind-generated turbulence in scum formation and development is still poorly understood. Here we present results from a laboratory mesocosm study where we analysed the processes of scum formation and its response to wind-generated turbulence at low wind speed (≤3.6 m s -1 ). Microcystis colony size and flow velocity at the water surface and in the bulk water were measured using a microscope camera and particle tracking velocimetry. The surface scum formed by aggregation of colonies at the water surface, where they formed loose clusters of increasing size. The presence of large colony aggregations or of a surface film determined the stability of the scum layer. For the largest applied wind speed, most of the aggregations were broken down to sizes <2 mm, which were dispersed to the bulk water. The surface scum recovered quickly from such disturbances after the wind speed decreased. We further observed reduced momentum transfer from wind to water with the growing scum layer. The presence of the scum increased the threshold wind speed for the onset of flow and reduced the flow velocities that were generated above that threshold. This effect was likely caused by the presence of a film of surface-active material at the water surface (surface microlayer), which is related to the presence of Microcystis. Both the small-scale turbulence and surface microlayer might play an important, yet largely unexplored role in Microcystis surface scum development in aquatic ecosystems. Improved understanding of the interplay of both processes will be instrumental for improving current mechanistic models for predicting surface bloom dynamics., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Microcystins (MCs) comprise a family of more than 80 related cyclic hepatotoxic heptapeptides. Oxidation of MCs causes cleavage of the chemically unique C20 beta-amino acid (2S, 3S, 8S, 9S)-3-amino-9-methoxy-2,6,8-trimethyl-10-phenyldeca-4,6-dienoic acid (Adda) amino to form 2-methyl-3-methoxy-4-phenylbutanoic acid (MMPB), which has been exploited to enable analysis of the entire family. In the present study, the reaction conditions (e.g. concentration of the reactants, temperature and pH) used in the production of MMPB by oxidation of cyanobacterial samples with permanganate-periodate were optimized through a series of well-controlled batch experiments. The oxidation product (MMPB) was then directly analyzed by high-performance liquid chromatography with diode array detection. The results of this study provided insight into the influence of reaction conditions on the yield of MMPB. Specifically, the optimal conditions, including a high dose of permanganate (> or = 50 mM) in saturated periodate solution at ambient temperature under alkaline conditions (pH approximately 9) over 1-4 h were proposed, as indicated by a MMPB yield of greater than 85%. The technique developed here was applied to determine the total concentration of MCs in cyanobacterial bloom samples, and indicated that the MMPB technique was a highly sensitive and accurate method of quantifying total MCs. Additionally, these results will aid in development of a highly effective analytical method for detection of MMPB as an oxidation product for evaluation of total MCs in a wide range of environmental sample matrices, including natural waters, soils (sediments) and animal tissues.

Microcystis colonies can overwinter in sediment and may inoculate the water column through recruitment, promoting the annual recurrence of Microcystis blooms. Through microcosm experiments, the survivability of benthic Microcystis was quantitatively investigated by elucidating the dynamics of its cell numbers, photosynthetic activity, and toxin content under various sediment conditions. The abundance of Microcystis colonies in the sediment samples did not decrease significantly over the 22-week experiment at 5 °C, whereas more than 90% of the benthic population died within 3 months at 25 °C. The survivability of the Microcystis colonies under the aerobic conditions of surface sediments was significantly lower than under the anaerobic conditions of deep sediments. Toxic M. aeruginosa and non-toxic M. wesenbergii exhibited similar survivability, although the final survival efficiency of M. aeruginosa was higher than that of M. wesenbergii at 15 and 25 °C. Microcystin quotas remained stable at 5 and 15 °C but decreased significantly at 25 °C. The photosynthetic activity of the benthic Microcystis colonies decreased gradually, with a larger decline rate at higher temperatures. Our study suggests that most benthic Microcystis colonies can overwinter successfully, with microcystins preserved and photosynthetic activity maintained, significantly increasing the risk of bloom formation. However, they were unable to accumulate in the sediments of subtropical shallow lakes over a period of years. [ABSTRACT FROM AUTHOR]

The kinetics of the anoxic biodegradation of intracellular and dissolved microcystin (MCs) and the effects of soluble organic materials on the process were investigated via a series of well-controlled microcosm experiments. The potential for the removal of intracellular and dissolved MCs from lake sediment differed. The dissolved MCs could be degraded to below the detection limit at 20 °C within one to 3 days after a lag phase of 2–6 days under anoxic conditions. The levels of intracellular MCs were also significantly reduced in the sun-dried cyanobacterial samples but not rapidly reduced in fresh cyanobacterial samples until the cells were ruptured. The addition of soluble organic matter enhanced the anoxic biodegradation of MCs. These results indicate that the application of anoxic biodegradation via lake sediments is an effective method to remove dissolved and intracellular MCs and that this process exhibits significant bioremediation potential for the further treatment of cyanobacteria. [ABSTRACT FROM AUTHOR]

Highlights • A rotary drum filter coupled with CPAM flocculation was developed for algae removal. • Filtration rate and removal efficiency were notably improved by 1 mg/L of CPAM. • Chl. a content of the effluent of the rotary drum filter was lower than 15 μg/L. Abstract Removing the extensively accumulated cyanobacteria from lake is a straightforward means to tackle cyanobacterial blooms. However, developing removal technology with both high removal efficiency and large treatment capacity remains a great challenge. We developed a shipboard rotary drum filter (RDF) with a 35-μm screen to remove cyanobacterial blooms at a flow rate of 900 m3/h in Lake Dianchi (Kunming, China). Nevertheless, the chlorophyll a (chl. a) concentration of the effluent was approximately 50 μg/L, which is higher than the control target of 20 μg/L. In this study, we aimed to improve the performance of RDF on cyanobacterial removal by the utilization of cationic polyacrylamide (CPAM). High molecular weight CPAM with a 30% cationic degree exhibited excellent flocculation effectiveness, with low flocculant doses, large sized flocs, short flocculation time, and high resistance to shear forces. Both the filtration rate and the cyanobacteria removal efficiency of the 35-μm screen were notably improved by 1 mg/L of CPAM. After being added before the water inlet pump and being agitated by the pump impellers, the CPAM could effectively flocculate cyanobacteria particles at a hydraulic retention time shorter than 20 s. Chl. a concentration and turbidity in the effluents of the shipboard RDF were reduced to lower than 20 μg/L and 12 NTU, respectively. Thus, a shipboard RDF coupled with CPAM flocculation is a promising approach to the removal of cyanobacterial blooms. [ABSTRACT FROM AUTHOR]