Search

In this study, a series of numerical calculations were performed to investigate the lateral behavior of piles in slopes and in horizontal ground. First, a numerical model is created and then verified by comparing the numerical results with the results of model tests. The numerical results agree well with the results of model tests. Second, numerical calculations of different slopes were conducted to explore the effect of slope angle on the horizontal displacement of pile and bending moment. Then, the effect of slope angle on the foundation stiffness proportional coefficient m is investigated. The stress distribution of soil around the pile and the deformation of pile at different slope angles are also compared. Finally, the p–y curves of the different slope angles are compared. An improved p–y method is proposed to consider the effect of slope angle based on the numerical results. The results show that the bearing capacity of piles decreases with an increase in slope angle. The horizontal displacement of pile nonlinearly decreases along the pile body with the depth of pile. The bending moment of piles increases along the pile body with an increase in pile depth, and until 0.5 times of the pile length, the bending moment reaches the maximum value. As the slope angle increases, the maximum of bending moment tends to decrease. The distance from the slope toe to the pile section has a little influence on the pile bending moment and horizontal displacement. With an increase in slope angle, the horizontal foundation coefficient m gradually decreases. [ABSTRACT FROM AUTHOR]

This paper presents the lateral pile-soil response occurring in coral and silica sand foundations through comparative numerical studies. In this study, the Hypoplastic constitutive model was implemented into Abaqus software to simulate the stress–strain relationship of coral sand and silica sand with the same particle gradation. The validation of numerical model was verified by centrifuge test results. Afterward, forty-eight numerical analyses were employed to assess the influence of pile diameter, embedment length, loading eccentricity, and relative density on the lateral response of piles in two kinds of sands. The load–displacement response, pile deflection, bending moment, and p-y curves were compared and analyzed in detail. The results showed that, with the increase in displacement level and relative density, the load responses of piles in coral sand gradually became greater than that in silica sand, the p-y curves in coral sand were also significantly higher than that in silica sand, and the bending moment and deflection profile of pile in silica sand were larger than that in coral sand. The difference in pile response between the two kinds of sands became more significant as the density and load level increased. Finally, a multi-parameter modified p-y model for coral sand was proposed, and its applicability and rationality were validated. [ABSTRACT FROM AUTHOR]

We propose a new approach based on the method of finite integral transformations and the theory of generalized functions to the solution of the problem of thermoelasticity for a circular plate heated by heat sources distributed along a curve. We also present the analysis of numerical results. [ABSTRACT FROM AUTHOR]