Search

The environmental concerns regarding fossil plastics call for alternative biopolymers such as polyhydroxyalkanoates (PHAs) whose manufacturing costs are however still too elevated. Autotrophic microbes like Cupriavidus necator, able to convert CO 2 and H 2 into PHAs, offer an additional strategy. Typically, the preferred source for CO 2 and H 2 are expensive pure gases or syngas, which has toxic compounds for most PHAs-accumulating strains. In this work, for the first time, H 2 and CO 2 originating from an acidogenic reactor were converted autotrophically into poly(3-hydroxybutyrate) P(3HB). During the first stage, a mixed microbial community continuously catabolized melon waste into H 2 (26.7 %) and CO 2 (49.2 %) that were then used in a second bioreactor by C. necator DSM 545 to accumulate 1.7 g/L P(3HB). Additionally, the VFAs (13 gCOD/L) produced during acidogenesis were processed into 2.7 g/L of P(3HB-co-3HV). This is the first proof-of-concept of using acidogenic-derived H 2 and CO 2 from fruit waste to produce PHAs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Broken rice, a low-cost starchy residue of the rice industry, can be an interesting substrate to reduce the polyhydroxyalkanoates (PHAs) production cost. However, since the most common PHAs-producing strains lack amylases, this waste must be firstly hydrolysed by additional commercial enzymes. In this work, the acidogenesis phase of the anaerobic digestion was exploited as efficient hydrolysis step to convert broken rice into volatile fatty acids (VFAs) to be used as PHAs carbon source by Cupriavidus necator DSM 545, one of the most promising PHAs-producing microbes. Broken rice, both non-hydrolysed and enzymatically hydrolysed, was processed in two continuous stirred tank reactors, at hydraulic retention times (HRT) of 5, 4 and, 3 days, to produce VFAs. The highest VFAs levels were obtained from non-hydrolysed broken rice which was efficiently exploited for PHAs accumulation by C. necator DSM 545. PHAs contents were higher after 96 h of incubation and, noteworthy, reached the highest value of 0.95 g/L in the case of 4 days HRT without any chemicals supplementation, except vitamins. Moreover, in view of a biorefinery approach, the residual solid fraction was used for methane production resulting in promising CH 4 levels. Methane yields were very promising again for 4 days HRT. As such, this HRT resulted to be the most suitable to obtain effluents with high promise in terms of both PHAs accumulation and CH 4 production. In addition, these results demonstrate that broken rice could be efficiently processed into two valuable products without any costly enzymatic pre-treatment and pave the way for future biorefining approaches where this by-product can be converted in a cluster of added-value compounds. Techno-economical estimations are in progress to assess the feasibility of the entire process, in view of supporting the low-cost conversion of organic waste into valuable products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal views that have appeared to influence the work described in this manuscript., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Starch-rich by-products could be efficiently exploited for polyhydroxyalkanoates (PHAs) production. Unfortunately, Cupriavidus necator DSM 545, one of the most efficient PHAs producers, is not able to grow on starch. In this study, a recombinant amylolytic strain of C. necator DSM 545 was developed for the one-step PHAs production from starchy residues, such as broken rice and purple sweet potato waste. The glucodextranase G1d from Arthrobacter globiformis I42 and the α-amylase amyZ from Zunongwangia profunda SM-A87 were co-expressed into C. necator DSM 545. The recombinant C. necator DSM 545 #11, selected for its promising hydrolytic activity, produced high biomass levels with noteworthy PHAs titers: 5.78 and 3.65 g/L from broken rice and purple sweet potato waste, respectively. This is the first report on the engineering of C. necator DSM 545 for efficient amylase production and paves the way to the one-step conversion of starchy waste into PHAs., (Crown Copyright © 2021. Published by Elsevier Ltd. All rights reserved.)

Slaughterhouse residues are greatly available and can pose a threat to the environment if not disposed of correctly. Such by-products can be proficiently processed into polyhydroxyalkanoates by accurately selected and developed bacterial strains. Cupriavidus necator DSM 545, one of the most efficient polyhydroxyalkanoates-producing strain, cannot grow well on fatty substrates. In this work, a recombinant lipolytic C. necator microbe was developed for the efficient conversion of slaughtering by-products into polyhydroxyalkanoates. Two lipase sequences, lipC and lipH of Pseudomonas stutzeri BT3, were effectively expressed in C. necator DSM 545. The engineered strain C. necator DSM 545 JR11, selected for the outstanding extracellular lipolytic activity, produced high levels of polyhydroxyalkanoates (nearly 65% of cell dry mass) from udder, jowl and membrane caul fat. This research is crucial to the cost-effective one-step processing of slaughterhouse waste into polyhydroxyalkanoates with useful applications in several industrial and medical sectors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal views that have appeared to influence the work described in this manuscript., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Industrial manufacturing of polyhydroxyalkanoates (PHAs) requires purification of PHAs granules from high-cell-density cultures. Cells are broken by homogenization and PHAs granules are cleansed and treated to obtain PHAs latexes. However, cell lysis releases large amounts of DNA which results in an increasing viscosity of the medium, hampering the following downstream steps. Drop in viscosity is generally achieved by costly procedures such as heat treatment or the supplementation of hypochlorite and commercially available nucleases. Searching for a cost-effective solution to this issue, a nuclease gene from Staphylococcus aureus has been integrated into two efficient PHAs-producing bacteria: Cupriavidus necator DSM 545 and Delftia acidovorans DSM 39. Staphylococcal nuclease has been proficiently expressed in both microbial hosts without affecting PHAs production. Moreover, the viscosity of the lysates of recombinant C. necator cells was greatly reduced, indicating that the engineered strain is expected to yield large reduction cost in PHAs downstream processing., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Cupriavidus necator DSM 545 is a well-known polyhydroxyalkanoates (PHAs) producer, but unable to grow on lactose. The aim of this study was to construct a recombinant strain of C. necator that can use lactose-containing waste material such as cheese whey, to produce PHAs. One of the intracellular PHA depolymerases (phaZ1) of C. necator was chosen to insert the lacZ, lacI and lacO genes of Escherichia coli. This would have the effect to allow polymer production on lactose and, at the same time, to remove part of the PHA intracellular degradation system. Disruption of phaZ1 was achieved by gene replacement after isolating a fragment of this gene and interrupting it with a cartridge containing the lac genes and a synthetic promoter. Growth and polymer production studies of the genetically modified (GM) strain mRePT in lactose, whey permeate and hydrolyzed whey permeate as carbon sources, were performed. Lower PHA degradation and higher yields were obtained compared to the wild-type strain. Inactivation of the putative depolymerase gene phaZ3 on mRePT recombinant strain was also reported., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

This work deals with the design, preparation and characterization of composites based on Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] and lignocellulosic filler suitable for the production of compostable and biodegradable biocomposites that mimic the thermo-mechanical and processing characteristics commonly found in those polymeric materials specially designed for injection molding and blow extrusion. The best formulation in terms of processability, thermo-mechanical properties and biodegradation behavior under mature compost conditions was the biocomposite that contained 42.8% by wt. of Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] as the major component, 5% by wt. of lignocellulosic filler, 10% by wt. of tributyl citrate plasticizer, 30% by wt. of Poly(butylene adipate-co-terephthalate), 10% by wt. of Poly(vinyl acetate), 0.2% by wt. of Joncryl ADR-4368C a chain extender, 1% by wt. of a primary antioxidant mix, and 1% by wt. of nucleating agents. [ABSTRACT FROM AUTHOR]