Search

Three-dimensional photonic crystals with a diamond lattice structure consisting of 5 × 5 × 5 unit cells with the unit cell dimension of 15 mm were fabricated using TiO2-based ceramic particles dispersed epoxy by stereolithography. The diamond lattice showed a perfect band gap between 14.3 and 15.8 GHz. An air cavity defect with a rectangular shape (15 mm × 45 mm × 15 mm) was introduced at the center of the crystal by extracting 3 unit cells in order to investigate the shape effect of the defect on the formation of localized defect modes of electromagnetic wave. When microwaves were radiated normal to the wide sides (45 mm × 15 mm) of the rectangular shape defect, a sharp localized mode appeared at the middle of the band gap. However, no localized mode was observed for incident waves normal to the smaller side (15 mm × 15 mm) because of the symmetry mismatching between internal eigenmodes in the defect cavity and incident plane waves. The mode analysis using a simple cavity model showed the penetration of the electric field of resonant modes about 2.4 mm into the host lattice. [ABSTRACT FROM AUTHOR]

Millimeter-order photonic crystals with the periodic arrangement of the dielectric constant were fabricated by infiltrating the mixed slurry of ceramics and polyester into the epoxy molds with an inverse form of a diamond structure. The epoxy molds are designed and processed by using a CAD/CAM process of stereolithography. The photonic crystals were prepared to have the diamond structure of the ceramic/polyester composite lattice, which is embedded in the epoxy matrix. The ceramic powders mixed with polyester are TiO2, SrTiO3, and BaTiO3 with high dielectric constant. It is possible to control more freely and widely the dielectric constant of the photonic crystals by this method. These ceramic/resin photonic crystals formed the complete photonic band gaps in the microwave band of 7–11 GHz, which can totally reflect the electromagnetic wave for all crystal directions. Attenuation profiles of the transmission amplitude in the band gaps were controlled with the dielectric constant of the composite lattice. The obtained results fairly agreed with the theoretical simulation of the electromagnetic wave propagation through photonic crystals. [Copyright &y& Elsevier]

A new concept of smart processing is proposed that can produce advanced materials and components by finely controlling processing energy and engineering structures. New functional components of 3D photonic crystals and fractals are demonstrated, which are constructed of dielectric ceramics and a polymer using a CAD/CAM stereolithography system. By modifying the structure of diamond-like photonic crystals using free-form fabrication, electromagnetic waves can be controlled, opening the way for new applications in communication and sensing technology. The photonic fractal, a new material that can strongly localize electromagnetic waves without reflection and transmission, will also lead to new applications in the energy and medical fields. [ABSTRACT FROM AUTHOR]

Photonic crystals with a diamond structure of epoxy lattices in which TiO[sub 2]-based ceramic particles are dispersed were fabricated by stereolithography. The periodicity of the lattice was designed to reflect electromagnetic waves in the gigahertz range. The volume fraction (β) of the dielectric lattice medium was modified from 14% to 33% by changing the rod diameter of the lattice. The photonic band gap was observed along Γ-L 〈111〉, Γ-X 〈100〉, and Γ-K 〈110〉 directions and the complete photonic band gap was formed at over β = 20%. The width of the forbidden gap increased gradually when the β increased over 14%, and reached 2.4 GHz at β = 33%. These results agreed with the band calculation using the plane wave expansion method. [ABSTRACT FROM AUTHOR]

Presents a study which investigated the electromagnetic properties of photonic crystals with diamond structure containing defects. Types of lattice defects in a diamond structure; Calculation of resonant frequencies in the defects; Properties of photonic crystals.

Three-dimensional electromagnetic or photonic crystals with periodic variations of the dielectric constants were fabricated by a rapid prototyping method called stereolithography. Millimeter-order epoxy lattices with a diamond structure were designed to reflect electromagnetic waves by forming an electromagnetic bandgap in the GHz range. Titanium oxide-based ceramic particles were dispersed into the lattice to control the dielectric constant, resulting in the formation of narrow and deep bandgaps. Crystals of the inverse form that have a network of holes with the diamond structure in a dielectric matrix were successfully fabricated as well. These inverse diamond structures formed the perfect bandgap reflecting electromagnetic waves for all directions. The location of the bandgap agreed with the band calculation using the plane wave propagation method. [Copyright &y& Elsevier]