Search

The design and performance of a high-resolution transmission-type X-ray spectrometer for use in the 15–26 keV energy range at synchrotron light sources is reported. Monte Carlo X-ray-tracing simulations were performed to optimize the performance of the transmission-type spectrometer, based on the DuMond geometry, for use at the Super X-ray absorption beamline of the Swiss Light Source at the Paul Scherrer Institute. This spectrometer provides an instrumental energy resolution of 3.5 eV for X-ray emission lines around 16 keV and 12.5 eV for emission lines at 26 keV, which is comparable to the natural linewidths of the K and L X-ray transitions in the covered energy range. First experimental data are presented and compared with results of the Monte Carlo X-ray simulations. [ABSTRACT FROM AUTHOR]

Recent X-ray optical experiments have validated previous theoretical work on focusing by bent crystals in Laue geometry. It was shown that a suitable choice of the crystal thickness significantly improves the focusing performance of the crystal by combining the dynamical focusing of the Borrmann triangle with the geometrical focusing obtained by the crystal bending. The best focus size achieved during the experiments was less than 5 µm and is in practice limited by the source demagnification for the considered setup. [ABSTRACT FROM AUTHOR]

The main limitation of Laue geometry for the achievement of a small focus size is the focus broadening caused by the intrinsic Darwin width and the spread of the beam in the Borrmann triangle, resulting from propagation inside the crystal. A method, based on dynamical focusing, is suggested that allows improvement of the quality of high-energy polychromatic focusing by bent crystals in Laue geometry. [ABSTRACT FROM AUTHOR]

We report on a high-resolution transmission-type curved crystal spectrometer based on the modified DuMond slit geometry. The spectrometer was developed at the University of Fribourg for the study of photoinduced X-ray spectra. K and L X-ray transitions with energies above about 10 keV can be measured with an instrumental resolution comparable to their natural linewidths. Construction details and operational characteristics of the spectrometer are presented. The variation of the energy resolution as a function of the focal distance and diffraction order is discussed. The high sensitivity of the spectrometer is demonstrated via the 2s-1s dipole-forbidden X-ray transition of Gd which could be observed despite its extremely low intensity. The precision of the instrument is illustrated by comparing the sum of the energies of the Au K-L2 and L2-M3 cascading transitions with the energy of the crossover K-M3 transition as well as by considering the energy differences of the Gd Kα1 X-ray line measured at five different diffraction orders. Finally, to demonstrate the versatility of the spectrometer, it is shown that the latter can also be used for in-house extended X-ray absorption fine structure measurements. [ABSTRACT FROM AUTHOR]

We report on the design and performance of a wavelength-dispersive type spectrometer based on the von Hamos geometry. The spectrometer is equipped with a segmented-type crystal for x-ray diffraction and provides an energy resolution in the order of 0.25 eV and 1 eV over an energy range of 8000 eV-9600 eV. The use of a segmented crystal results in a simple and straightforward crystal preparation that allows to preserve the spectrometer resolution and spectrometer efficiency. Application of the spectrometer for time-resolved resonant inelastic x-ray scattering and single-shot x-ray emission spectroscopy is demonstrated. [ABSTRACT FROM AUTHOR]