Search

Nanohybrid shish kebab (NHSK) structure, in which fibrous carbon nanotubes (CNTs) act as shish, while polymer lamellae as kebab, is of particular interest both scientifically and technologically. In this work, two types of CNTs with the same diameter range and different topography structure, namely multiwalled carbon nanotubes (MWNTs) with a relatively smooth surface and double-walled carbon nanotubes (DWNTs) bundles with a groove structure, were used to induce polyethylene (PE) crystallization for the formation of NHSK. For PE/MWNTs system, NHSK was formed only at a relatively low crystallization temperature (Tc), and PE lamellae are not completely perpendicular to the long axis of MWNTs. However, for PE/DWNTs bundles system, NHSK could be obtained even at a much higher Tc, and almost all the PE lamellae are perpendicular to CNTs long axis, due to the unique "groove structure" formed by DWNTs bundles. The enhanced nucleation ability and the facilitated lamellae orientation by using DWNTs bundles are not only of great crystallography interest but also are very important for functional design in nanodevice applications. [ABSTRACT FROM AUTHOR]

Abstract: Dibenzylidene sorbitol (DBS) exists in the form of fibril and usually acts as an effective nucleating agent to facilitate crystallization of polyolefin during manufacturing. In this research, the isothermal crystallization of isotactic polypropylene (iPP) containing different amounts of DBS was followed by dynamic rheometry, and described upon a viewpoint of viscoelastic property evolution. Since the adopted temperatures within the entire sample preparation and characterization process were below the melting point of DBS, the DBS additives played a role of only solid nucleating agent, thus the possible effect of a changed miscibility between iPP and DBS on the viscoelastic properties as change of temperature could be ignored. Although saturation of nucleating iPP was observed at 0.1% DBS concentration, a negative influence with further increasing DBS content on the crystallization of iPP was determined for the first time via time sweep of G′ upon a single angular frequency and application of “inverse quenching” protocol within a wide range of angular frequency. Even more, a largely increased G′ and viscosity were observed in the melt as decreasing the temperature of iPP containing 0.1% DBS, suggesting a strong quasi-solid like behavior before iPP crystallization. A complement for well understanding the crystallization of iPP containing nucleating agent was discussed based on the formation of the DBS fibrils'' network, the interfacial tension between crystalline/amorphous phase, and the consistency of crystallizing lamellae. Our study demonstrates clearly that the crystalline characteristic upon saturation of heterogeneous nucleating is difficult to be detected by traditional means, but could be followed reasonably by rheological measurements which is much sensitive to the microstructural changes. [Copyright &y& Elsevier]

Abstract: Interfacial crystallization of polymer on the surface of filler not only offers crystallography interest but also has a potential to improve the interfacial interaction, which is a key for the preparation of high-performance polymer/filler composites. In this work, a new method is proposed to improve the interfacial crystallization between semi-crystalline polymer and glass fiber (GF) by introducing graphene oxide (GO) to the surface of amorphous GF. The coating of GO on GF surface is realized via electrostatic self-assembling of the oppositely charged GO and amino coupling agent modified GF (GF-NH2). After the thermal reduction of the coated GO (RGO), RGO coated GF (GF-RGO) is obtained. The interfacial crystallization of isotactic polypropylene (iPP) and poly(l-lactide) (PLLA) on the surface of raw GF, GF-NH2, and GF-RGO are investigated using Polarized light microscope (PLM). It is found that raw GF and GF-NH2 has almost no nucleation ability on the polymers crystallization. However, transcrystalline structure can be successfully induced at the polymers/GF-RGO interface, indicating a significantly improved nucleation ability of GF-RGO for polymer crystallization. This work could provide a new way to control interfacial crystallization, thus the interfacial adhesion of polymer/filler composites, and could also find a new application for GO as well. [Copyright &y& Elsevier]

Abstract: Periodic patterning of carbon nanotubes (CNTs) with semi-crystalline polymers, especially the novel nanohybrid shish kebab (NHSK) superstructure, in which fibrous CNTs act as shish while polymer lamellae as kebab, is of interest both scientifically and technologically. So far the reported NHSK are mostly prepared using polymers with zigzag conformation in crystal and it seems difficult to obtain NHSK using polymer with helical conformation. In this work, we report the formation of NHSK structure by using single-walled carbon nanotube (SWNT) bundles. A promoted formation of NHSK was observed even using polymer with helical conformation, and the formation mechanism of NHSK was attributed to the unique “groove structure” formed by the stacked SWNTs in parallel arrays, which could facilitate the orientation of helical polymer chains along the SWNTs axis and the lateral formation of stable nucleus. The NHSK structure in helical polymer/SWNT bundles system could widen application of this unique superstructure, offering value in both application field and crystallography aspect as well. [Copyright &y& Elsevier]