Search

Herein, we reported the formation mechanism of hybrid crystalline (cylindrite) in isotactic polypropylene (iPP)/carbon fiber (CF) via pulling a CF within the iPP melt. The α‐row nuclei layer closely attached to the surface of CF acts as a self‐nucleation site, rather than a heterogeneous nucleation one, to grow cylindrites. As a result, the polymorphic feature of iPP/CF cylindrite is significantly influenced by the microstructure of α‐row nuclei. With decreasing crystallization temperature (Tc), the polymorphic cylindrite changes from pure α‐form to mixed α‐/β‐form and to β‐rich form. The main characteristics of this change include: (a) the outlines of α‐row nuclei layer correspond to wave‐like, saw‐like, and straight lines; (b) the orientation level of iPP molecules in the α‐row nuclei layer become higher; (c) the α‐lamellae rearrange from loose to compact; and (d) the distance between the growth sites of β‐sectors and the surface of CF is evidently longer than in the case of α‐sectors. Moreover, this study provides a guideline for developing the interfacial enhanced iPP/CF composites through manipulation of polymorphic structure in cylindrites. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019, 57, 368–377 The correlation between the α‐row nuclei and shear‐induced iPP/CF variable cylindrite (pure α‐cylindrite, mixed α/β‐cylindrite, and β‐rich cylindrite) was systematically established by comparing the detailed microstructure. The systematical growth processes of shear‐induced cylindrites with different crystalline temperatures are illustrated. Furthermore, it was concluded that the polymorphism of cylindrite is strongly dependent on the orientation and packing density of the fibril lamellae in the α‐row nuclei. [ABSTRACT FROM AUTHOR]

Recently, stereocomplex-type polylactide (SC-PLA) has generated growing interest because the unique SC crystals can provide drastic improvement in the heat/chemical resistances and durability of bio-derived and biodegradable PLA, exhibiting great potential to compete with some petroleum-derived engineering plastics in diverse applications. However, SC-PLA suffers from poor melt memory effect as well as significant thermal degradation after being completely melted at temperatures above 250 °C, which make it challenging to converse SC-PLA into useful products using versatile melt-processing technologies. With these challenges in mind, in this work, we propose a facile and practical strategy to fabricate SC-PLA products with exceptional thermomechanical properties through low-temperature melt-processing of SC-PLA powder with a bimodal melting temperature distribution. The results show that the melting temperature (T m) bimodality makes SC-PLA powder able to be easily injection molded at a relatively low temperature of 210 °C (between the two T m s) due to the selective melting of the low- T m SC-PLA component (SC- l PLA, ca. 20–40 wt%), indicating a good melt-processability. Meanwhile, the high- T m SC-PLA (SC- h PLA) component can directly deliver its desirable properties to the injection molded SC-PLA products. More importantly, during the injection molding process, the unmelted SC- h PLA particles can also induce the exclusive SC crystallization of the SC- l PLA melt as nucleating agent and greatly amplify the shear stress imposed on the melt as "rigid particles", finally generating numerous oriented SC structure in the SC- l PLA. Consequently, the injection molded SC- h PLA/SC- l PLA products exhibit impressively high tensile strength (74.3 MPa) and Vicat softening temperature (211.6 °C). Overall, this work presents an effective guidance for achieving desirable melt-processability of SC-PLA without sacrificing its thermomechanical properties and provides an industrial processing route towards high-performance SC-PLA products. Image 106841 • SC-PLA products were fabricated by low-temperature melt-processing of bimodal SC-PLA powder. • The melting temperature bimodality plays a key role in achieving balanced melt-processability and product performance. • The SC- l PLA component can provide the powder with good low-temperature melt-processability. • The SC- h PLA component can endow the melt-processed products with exceptional thermomechanical performance. • SC- h PLA induced exclusive SC formation and crystal orientation can also contribute to the enhanced performance. [ABSTRACT FROM AUTHOR]