Search

Temperature is one of the key parameters to determine the structures and properties of polymers during processing, but the effect of processing temperature on similar-structured polymer blends has rarely been reported. In this work, a linear low-density polyethylene (LLDPE)/ethylene-octene copolymer (EOC) blend with similar-structured components was chosen as a model system to study the effect of processing temperature (including compounding temperature and molding temperature) on its crystallization, phase morphology, and tensile behavior. It was found that the blends presented evenly distributed rubbery domains at lower processing temperatures, whereas a special, EOC-rich phase domain consisting of a less stable crystalline phase and a rubbery phase was observed at higher processing temperatures. The phase morphology was mainly determined by the final processing temperature, which had a major effect on the yield stress of the material. This work not only reports novel results on processing-structure-performance relations of similar-structured blends but can also guide the design and production of LLDPE-based products with tailored properties. [ABSTRACT FROM AUTHOR]

Blending polyethylene with thermoplastic polyolefin elastomers (TPOs) is a promising way to manipulate its structures and tailor its properties. Herein, three TPOs, i.e., two ethylene–octene copolymers (EOCs) and an olefin block copolymer (OBC) with different structures, were used to comparatively investigate the miscibility, crystallization, and phase behavior of their blends with a linear low-density polyethylene (LLDPE). It was found that large differences occurred in the crystallization and phase behaviors of the blends due to the different extent of similarity in the molecular structure between the TPO and the LLDPE matrix. In particular, a unique segregated phase morphology comprised a less stable crystalline phase and a rubbery phase was found in an LLDPE/EOC blend. The tensile performance and elasticity of the blends were also studied and correlated with the structures of the blends. This work not only provides novel results on the miscibility and phase behavior of the similar-structured LLDPE/TPO blends, but can also guide the design of LLDPE-based products with tailored performances. [ABSTRACT FROM AUTHOR]

Bioresource natural sisal fiber ( SF) was used to prepare single fiber-reinforced isotactic polypropylene ( iPP) composites. Three kinds of interfacial crystalline morphologies, spherulites, medium nuclei density transcrystallinity ( MD-TC) and high nuclei density transcrystallinity ( HD-TC), were obtained in the single fiber-reinforced composites by implementing quiescent or dynamic shear-enhanced crystallization and by modulating the compatibility interaction between SF and iPP. The development of interfacial shear strength ( IFSS) during the interfacial crystallization process was demonstrated for the first time using a combination of single-fiber fragmentation testing and optical microscope observation. A close correlation between IFSS and morphological characteristics of interfacial crystallization was well elucidated. The increases in IFSS were very different for spherulitic, MD-TC and HD-TC morphologies. The highest IFSS obtained was 28 MPa, after the formation of HD-TC, which was about 62% of the tensile strength of neat iPP (45 MPa). These results offer powerful and direct evidence that interfacial crystallization could play an important role in the enhancement of interfacial adhesion of real SF/ iPP composites. © 2013 Society of Chemical Industry [ABSTRACT FROM AUTHOR]