Search

The high demand for lithium (Li) relates to clean, renewable storage devices and the advent of electric vehicles (EVs). The extraction of Li ions from aqueous media calls for efficient adsorbent materials with various characteristics, such as good adsorption capacity, good selectivity, easy isolation of the Li-loaded adsorbents, and good recovery of the adsorbed Li ions. The widespread use of metal-based adsorbent materials for Li ions extraction relates to various factors: (i) the ease of preparation via inexpensive and facile templation techniques, (ii) excellent selectivity for Li ions in a matrix, (iii) high recovery of the adsorbed ions, and (iv) good cycling performance of the adsorbents. However, the use of nano-sized metal-based Lithium-ion sieves (LISs) is limited due to challenges associated with isolating the loaded adsorbent material from the aqueous media. The adsorbent granulation process employing various binding agents (e.g., biopolymers, synthetic polymers, and inorganic materials) affords composite functional particles with modified morphological and surface properties that support easy isolation from the aqueous phase upon adsorption of Li ions. Biomaterials (e.g., chitosan, cellulose, alginate, and agar) are of particular interest because their structural diversity renders them amenable to coordination interactions with metal-based LISs to form three-dimensional bio-composite materials. The current review highlights recent progress in the use of biopolymer binding agents for the granulation of metal-based LISs, along with various crosslinking strategies employed to improve the mechanical stability of the granules. The study reviews the effects of granulation and crosslinking on adsorption capacity, selectivity, isolation, recovery, cycling performance, and the stability of the LISs. Adsorbent granulation using biopolymer binders has been reported to modify the uptake properties of the resulting composite materials to varying degrees in accordance with the surface and textural properties of the binding agent. The review further highlights the importance of granulation and crosslinking for improving the extraction process of Li ions from aqueous media. This review contributes to manifold areas related to industrial application of LISs, as follows: (1) to highlight recent progress in the granulation and crosslinking of metal-based adsorbents for Li ions recovery, (2) to highlight the advantages, challenges, and knowledge gaps of using biopolymer-based binders for granulation of LISs, and finally, (3) to catalyze further research interest into the use of biopolymer binders and various crosslinking strategies to engineer functional composite materials for application in Li extraction industry. Properly engineered extractants for Li ions are expected to offer various cost benefits in terms of capital expenditure, percent Li recovery, and reduced environmental footprint. [ABSTRACT FROM AUTHOR]

Gas separation properties are reported for self-standing polymer of intrinsic microporosity (PIM) films after addition of palladium (II) acetate or iron (II) acetate by solid state or liquid state mixing. Membranes, with thicknesses in the range 35–55 μm, were prepared from three high molar mass PIMs, two different branched versions of the much-reported PIM-1 (PIM-1a and PIM-1b) and of PIM-Py. Addition of either Fe(OAc) 2 or Pd(OAc) 2 to all three PIMs led to a reduction in permeability and increase in selectivity, but the permeability reduction was much greater for Pd(OAc) 2 , which is able to interact with branch points in the PIM and crosslink the polymer. CO 2 /CH 4 selectivity of membranes containing Pd(OAc) 2 was poor upon aging, especially after solid state addition to the PIM-1 polymers, for which CO 2 permeabilities dropped to below 200 Barrer after 85 days. Hydrogen permeability and H 2 /N 2 selectivity of membranes containing Pd(OAc) 2 did more closely follow conventional permeability/selectivity trade off upon aging. This illustrates the profound differences that can arise in gas permeation properties and aging behaviour from variations in chemical structure and macromolecular characteristics, and from the addition of metal acetates that interact with the polymer in different ways. [Display omitted] • Branched PIM-1 crosslinked with Pd(OAc) 2 produced membranes with reduced permeability. • Loss in CO 2 permeability on aging not matched with increase in CO 2 /CH 4 selectivity. • Loss in H 2 permeability on aging matched with increase in H 2 /N 2 selectivity. • Crosslinks block smaller free volume elements that dominate CO 2 /CH 4 selectivity. • Fe(OAc) 2 mixed PIM-1 membranes maintain permeability/selectivity balance. [ABSTRACT FROM AUTHOR]