Search

Fracture criteria for prediction of extension of the interface crack and of the crack growth direction in a bimaterial consisting of a homogeneous and a functionally graded material (FGM) with systems of internal defects are studied. The bimaterial is subjected to a heat flux and a tensile load applied at infinity. It is assumed that the thermal properties of the FGM have exponential form. The Young’s modulus and Poisson’s ratio are assumed to be constant. In the previous papers (Petrova and Schmauder, 2011a,b, 2012a,b) asymptotic analytical formulas for the stress intensity factors (SIFs) at the interface crack tips were obtained as a series of a small parameter (the ratio between sizes of the internal and interface cracks). These SIFs are used in fracture criteria to obtain the possible direction of crack propagation and critical loads. The maximum circumferential stress criterion is used and some results for the fracture angles is obtained by the minimum strain energy density in order to compare the predictions for the fracture angles by two fracture criteria. The influence of geometry of the problem (location and orientation of cracks) and the parameters of non-homogeneity of FGMs on the main fracture characteristics is investigated. [ABSTRACT FROM AUTHOR]

Abstract: The work is devoted to the investigation of fracture processes in the vicinity of an interface crack in functionally graded/homogeneous bimaterials with internal defects subjected to tensile loading and a heat flux. A previously obtained solution () for the case of thermal loading on the same geometry is used as a part of the present solution. The solution is based on the integral equation method and it is assumed that thermal properties of the functionally graded material (FGM) possess exponential form. An asymptotic analytical solution is derived for a special case where an interface crack is larger than internal cracks in the FGM. The stress intensity factors are presented as asymptotic analytical functions of geometry of the problem and material properties. Analyses of the effects of the location and orientation of the cracks and the material non-homogeneity parameters on the stress intensity factors in FGM/homogeneous bimaterials is performed in the presence of thermal and mechanical loading. Examples of some FGM/homogeneous bimaterial are discussed. [Copyright &y& Elsevier]

Abstract: The work is devoted to mathematical modeling of the fracture processes in the vicinity of an interface crack in functionally graded/homogeneous bimaterials with internal defects subjected to a thermal flux. A previously obtained solution (Petrova and Schmauder, 2009, 2011) is used and supplemented with the additional possibility to take into account the crack closure. The solution is based on the integral equation method and it is assumed that thermal properties of the functionally graded material (FGM) have exponential form. For a special case where an interface crack length is much larger than the internal cracks in the FGM an asymptotic analytical solution of the problem is obtained as series of a small parameter (the ratio between sizes of the internal and interface cracks). Analyses of the effects of the location and orientation of the cracks, the material non-homogeneity parameters and the crack closure effects on the thermal stress intensity factors of the interface crack in FGM/homogeneous bimaterials are performed. Examples of some FGM/homogeneous bimaterial combinations (i.e., metal/metal, ceramic/metal) are discussed. [Copyright &y& Elsevier]

Abstract: The thermal fracture of a bimaterial consisting of a homogeneous material and a functionally graded material (FGM) with a system of internal cracks and an interface crack is investigated. The bimaterial is subjected to a heat flux. The thermal properties of FGM are assumed to be continues functions of the thickness coordinate, while the elastic properties are constants. The method of the solution is based on the singular integral equations. For a special case where the interface crack is much larger than the internal cracks in the FGM the asymptotic analytical solution of the problem is obtained as series in a small parameter (the ratio between sizes of the internal and interface crack) and the thermal stress intensity factors (TSIFs) are derived as functions of geometry of the problem and material characteristics. A parametric analysis of the effects of the location and orientation of the cracks and of the inhomogeneity parameter of FGM’s thermal conductivity on the TSIFs is performed. The results are applicable to such kinds FGMs as ceramic/ceramic FGMs, e.g., TiC/SiC, MoSi2/Al2O3 and MoSi2/SiC, and also some ceramic/metal FGMs. [Copyright &y& Elsevier]