Search

Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of the concrete compared to the same parameters measured during a short-time laboratory test. This phenomenon causes the so called sub-critical crack propagation. That is the reason why the International Commission of Large Dams recommends to neglect the tensile strength of the joint between the dam and the foundation, which is the weakest point of a gravity dam. In these conditions a shear displacement discontinuity starts growing in a point, called Fictitious Crack Tip (shortened FCT), which is still subjected to a compression stress. In order to manage this problem, in this paper the cohesive crack model is re-formulated with the focus on the shear stress component. In this context, the classical Newton-Raphson method fails to converge to an equilibrium state. Therefore the approach used is based on two stages: (a) a global one in which the FCT is moved ahead of one increment; (b) a local one in which the non-linear conditions occurring in the Fracture Process Zone are taken into account. This two-stage approach, which is known in the literature as a Large Time Increment method, is able to model three different mechanical regimes occurring during the crack propagation between a dam and the foundation rock. [ABSTRACT FROM AUTHOR]

Many studies have recently been conducted to evaluate various mechanical characteristics of the Opalinus Clay (OPA) formation in view of its potential use as the hosting rock for the Swiss nuclear waste repositories. Its sedimentary bedding makes OPA a transversely isotropic rock and its directional mechanical properties need to be measured. This paper reports on an experimental and computational approach that was adopted to define the parallel-to-bedding fracture mechanics (FM) parameters of OPA in Mode-I. OPA cores from Mont Terri Underground Research Laboratory (URL) were submitted to laboratory tests on notched semi-circular specimens under three-point bending (SCB). In these tests, crack propagation is forced along the notch direction. However, the 45° bedding inclination of the specimen axis frequently deviated the crack from the expected direction. An analysis of the SCB tests was performed by means of non-linear FM techniques and the pertinent Mode-I parameters along the bedding were estimated. [ABSTRACT FROM AUTHOR]

The safety of cracked concrete dams is fundamentally affected by the mechanical behaviour of the material under cyclic loading conditions. In this case the crack can grow at a lower load level compared to the monotonic case. This phenomenon is called subcritical crack propagation and depends on the mechanical behaviour of the fracture process zone. To assess this phenomenon, a number of experimental tests, where the loading process is based on a first monotonic step (stopped before reaching the peak load), followed by a series of cyclic loading phases until collapse, are examined. The results of numerical analyses appear to be in good agreement with the experimental data obtained in the case of wedge splitting tests. [ABSTRACT FROM AUTHOR]