Search

The catalytic conversion of cellulose to lactic acid (LA) has garnered significant attention in recent years due to the potential of cellulose as a renewable and sustainable biomass feedstock. Here, a series of Au/W-ZnO catalysts were synthesized and employed to transform cellulose into LA. Through the optimization of reaction parameters and catalyst compositions, we achieved complete cellulose conversion with a selectivity of 54.6% toward LA over Au/W-ZnO at 245 °C for 4 h. This catalyst system also proved effective at converting cotton and kenaf fibers. Structural and chemical characterizations revealed that the synergistic effect of W, ZnO, and Au facilitated mesoporous architecture generation and the establishment of an adequate acidic environment. The catalytic process proceeded through the hydrolysis of cellulose to glucose, isomerization to fructose, and its subsequent conversion to LA, with glucose isomerization identified as the rate-limiting step. These findings provide valuable insights for developing high-performance catalytic systems to convert cellulose. [ABSTRACT FROM AUTHOR]

Natural indigo is a traditional dye for textiles. However, a large number of impurities on the surface of dyed fibers have been reported, which leads to poor friction and electrical performance, and exerts a negative impact on the spinning of the fibers. In this paper, a centrifugation pretreatment of the leuco indigo dye liquid was reported to remove the impurities, and the centrifuged dye was then applied to cotton fiber. The results revealed that centrifugation could effectively remove 88.2% of solid impurities, and the fiber after being dyed showed a clean and smooth surface. There was almost no chromatic aberration compared with the original fibers that were dyed with the noncentrifuged dye solution, and the optimized value of the color difference was less than 0.5. The friction and electrical properties of the fibers were improved. There was significantly reduced dust observed during the spinning process of the dyed fibers, and the spinnability of the fibers was improved. The coefficient of variation of single yarn decreased from 28.35% to 21.19%. [ABSTRACT FROM AUTHOR]

Cotton fiber is mainly composed of cellulose, which is rarely separated into different kinds. However, the classification and identification of waste cotton from different countries are essential for the customs service of the country. In this study, the near-infrared classification method was introduced to classify and identify cotton fibers. Waste cotton samples from six different countries were collected, and one-fifth of them were used for validation. The near-infrared calibration and prediction models were constructed using both soft independent modeling of class analogy and partial least squares methods. It was found that the optimized model has a high recognition rate, and the prediction accuracy of the model was 99% for six countries. It was demonstrated that the near-infrared model established in this study can be used for fast and accurate identification of waste cotton from different countries. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Chemically deuterated cellulose fiber was expected to provide novel applications due to its spectral, biological, and kinetic isotope effect. In this research, the performance of the chemically deuterated cotton fibers, including their mechanical property, enzymatic degradation performance, effect on bacterial treatment, and fast identification (near-infrared modeling) was investigated. The breaking tenacity of the deuterated cotton fibers was slightly lower, which might be attributed to the structural damage during the chemical deuteration. The glucose yield by enzymatic hydrolysis was less than that of the protonic cotton fibers, implying the deuterated fibers are less sensitive to enzymatic degradation. Furthermore, the deuterated fibers could promote the growth of bacteria such as Escherichia. coli , which was associated with the released low-level deuterium content. At last, the near-infrared technique combined with partial least squares regression successfully achieved a fast identification of the protiated and deuterated cotton fibers, which significantly promoted the potential application of deuterated cellulose as anticounterfeiting materials (e.g., special paper). [ABSTRACT FROM AUTHOR]

Preparation of deuterium incorporated cellulose is a vital tool to investigate cellulose internal structure and to expand the application fields of cellulose materials. In this study, cellulosic cotton fibers with anti-rehydration (exchange-resistant) deuterium incorporated in cellulose were prepared by chemical hydrogen–deuterium exchange treatment. The chemical hydrogen–deuterium exchange process, along with exchange time, were characterized by nuclear magnetic resonance hydrogen spectroscopy (1H-NMR). The anti-rehydration deuterium incorporation was determined by Fourier Transform infrared spectroscopy (FTIR) and Stable Isotope Ratio Mass Spectrometer (IRSM). The effect of the deuterium hydroxyl substitution on cotton fiber's spectral data, microstructure, crystalline information, degree of polymerization, as well as it's thermogravimetric analysis (charcoalization and combustion) are explored. Analysis of the chemical exchange process indicated that the hydrogen–deuterium exchange occurred preferentially in the amorphous cellulose component over the first several minutes. Deuterium exchange in the anti-rehydration crystalline phase took several hours. Increasing the treatment time, enhanced exchange-resistant deuterium incorporation to as high as about 60% of the cotton fibers' cellulose hydroxyl groups was achieved. The characterization of FTIR, Fourier transform Raman (FT-Raman), and near-infrared spectra (NIR) all exhibited the deuterium spectral isotope effect on cellulose hydroxl groups. While, apart from the effect of reaction temperature, deuterium incorporation isotope effect did not affect the cellulose microstructure, crystalline index and the degree of polymerization properties. Furthermore, the thermogravimetric analysis of deuterated cotton fibers under N2 and air atmosphere were both altered due to the thermodynamic isotope effect. These observations revealed the hydrogen–deuterium exchange treatment process and impacts on cellulose fiber properties, which helped us to better understand the cellulose internal structure and may facilitate the potential utilization of deuterated cellulosic materials. [ABSTRACT FROM AUTHOR]

Production of deuterated cellulose is important from both theoretical and practical perspectives. In this study, cellulose fibers of cotton and Tencel fibers with exchange-resistant deuterium incorporation were prepared by hydrogen–deuterium exchange treatment. The effect of the micro-structure of cellulose crystallinity index as well as the reaction conditions including catalyst, reaction time, and temperature on the exchange-resistant deuterium incorporation process are reported. The ability of deuterated cellulose fibers to resist protium-exchange during H2O washing was also explored. The results found that higher crystallinity index is beneficial to stabilize the deuteration of cellulose fibers. Furthermore, alkaline catalysts such as sodium hydroxide or potassium carbonate and higher exchange temperature as well as longer reaction time contribute significantly to the stabilization of deuterium incorporation in the deuterated cellulose fibers. These observations revealed that the hydrogen–deuterium exchange treatment is effective to obtain exchange-resistant deuterium incorporated cellulose fibers. In addition, cotton fibers with several deuteration levels were produced and could be considered for the study of deuterium effect on cellulose properties. [ABSTRACT FROM AUTHOR]