Search

Green emitting copper nanoclusters (G-Cu NCs), yellow emitting Cu NCs (Y-Cu NCs), orange emitting Cu NCs (O-Cu NCs) and red emitting Cu NCs (R-Cu NCs) were prepared using chicken egg white as the stabilizer by changing the reaction conditions. This is a green, facile and cheap method to explore different color emitting CuNCs by the same precursor and stabilizers. The G-Cu NCs were employed for the detection of ethanol due to their aggregation induced emission enhancement (AIEE) effect. The fluorescence emission of Cu NCs at 526 nm under the excitation of 444 nm can be effectively enhanced in the presence of ethanol due to AIEE effect, thus realizing the quantitative determination of ethanol content in the range 5–60%. In addition, a visual dual-emission fluorescence probe with the combination of G-Cu NCs and silicon nanoparticles (Si NPs/G-Cu NCs) was designed to evaluate ethanol content conveniently and rapidly. Desirable linear relationship is observed between ratio of fluorescence intensity (I525/I441) and ethanol content under the excitation of 383 nm. Visible color transformation of this probe is observed in the ethanol content range 2–20%. Moreover, the ethanol sensing platforms were applied to the detection and evaluation of the alcohol content of liquor, and the recoveries in liquor were in the range 99.7% to 113%, broadening the applications of Cu NCs and providing a sensitive detection method for ethanol. [ABSTRACT FROM AUTHOR]

[Display omitted] • A sensitive ratio-fluorescence sensor for hypochlorite determination was developed. • The detection mechanism was based on oxidation of curcumin to hypochlorite. • It has a low detection limit, and was applied to milk and tap water samples. • The smartphone was introduced to realize the visual quantitative detection. A sensitive naked eye and ratio-fluorescence sensor for Curcumin (CCM) and hypochlorite (ClO-) determination based on copper nanoclusters (Cu NCs) was developed. The fluorescence of the Cu NCs can be quenched due to inner filter effect (IFE) between CCM and Cu NCs, and the ratio fluorescence probe was formed. After adding ClO- to Cu NCs-CCM system, the phenolic and methoxy groups of CCM were oxidized to quinones, then the fluorescence of CCM was quenched and the fluorescence of Cu NC was restored. Moreover, the continuous detection of CCM and ClO- is accompanied by the change of solution color. Therefore, CCM and ClO- semiquantitative visual and fluorescence dual channel detection were realized. The detection results show that the detection based on Cu NCs-CCM probe has a wide detection range (0–412 µM) and low detection limit (24 µM), and a good recovery rate is obtained in adulterated milk and tap water detection. Furthermore, smartphone was introduced for image digital colorimetric analysis through the acquisition, recognition and RGB data processing of solution colors, providing an effective scheme for the field rapid detection of hypochlorite. [ABSTRACT FROM AUTHOR]

A rapid method is described for synthesis of copper nanoclusters (CuNCs) by utilizing L-histidine as the stabilizer and ascorbic acid (AA) as the reductant. The CuNCs display blue-green fluorescence with excitation/emission peaks at 390/485 nm. A sensitive fluorometric assay was worked out for determination of alkaline phosphatase (ALP) activity. If the ALP substrate p-nitrophenylphosphate (PNPP) is enzymatically hydrolyzed, it forms p-nitrophenol (PNP) which reduces the fluorescence of CuNCs because its absorption band at 410 nm overlaps the excitation peak of CuNCs at 390 nm. In addition, the amino groups and imidazole groups on the surface of CuNCs possibly form a complex with the phenol groups of PNP. This induces aggregation-induced quenching of the fluorescence of CuNCs. The fluorescent probe has a linear analytical range that extends from 0.5 mU·mL−1 to 40 mU·mL−1 and a detection limit of 45 μU·mL−1.Schematic illustration of a fluorometric assay for alkaline phosphatase (ALP) activity that uses L-histidine protected copper nanoclusters (CuNCs), aggregation-induced quenching, and the inner filter effect between PNP and CuNCs. [ABSTRACT FROM AUTHOR]

Stable copper nanoclusters (CuNCs) were prepared by utilizing D-penicillamine as both the stabilizer and reductant. The emission of the CuNCs (with excitation/emission peaks at 390/645 nm) is largely stabilized by coating with poly(sodium-p-styrenesulfonate) (PSS). Cytochrome c (Cyt c) quenches the fluorescence of the PSS-coated CuNCs, and this effect was exploited to design a quenchometric fluorometric assay for Cyt c. If trypsin is added to the loaded CuNCs, it will hydrolyze Cyt c to form peptide fragments, and fluorescence is gradually restored. A highly sensitive and fluorometric turn-off-on assay was constructed for sequential detection of Cyt c and trypsin. The linear ranges for Cyt c and trypsin are from 8.0 nM to 680 nM, and from 0.1 to 6.0 μg mL−1, and the lower detection limits are 0.83 nM and 20 ng mL−1 for Cyt c and trypsin, respectively.Schematic illustration of the fluorometric assay for trypsin based on the electron transfer between poly(p-styrenesulfonate)-protected copper nanoclusters (PSS-CuNCs) and cytochrome c (Cyt c). [ABSTRACT FROM AUTHOR]