Search

The main focus of current research in polymeric matrix brake composites is on searching out a replacement for copper, which has been recently proved to be a hazard to human health and the environment. In this paper, rare earth lanthanum oxide was explored for the replacement of copper in composites. The mechanism of the role of lanthanum oxide in brake composites to replace copper was analyzed. Four series of polymeric matrix brake composites with various amounts of copper (15, 10, 5 and 0 wt %) and rare earth lanthanum oxide (0, 5, 10 and 15 wt %) were developed, in which the copper was gradually replaced by lanthanum oxide in the formula. These series were characterized in terms of physical, thermo-physical and mechanical properties. The results show that lanthanum oxide can be successfully used as a replacement for copper in brake composites. Brake composites with 15 wt % lanthanum oxide that are copper-free are considered optimal, where tribo-properties are considered best. Compared with the addition of copper in brake composites, lanthanum oxide is more conducive to the formation of compacted friction films and transfer films, which is beneficial to the tribological properties of the brake composites. The addition of La2O3 to the brake composites can cause the reaction between La2O3 and Al2O3 to form LaAlO3, and the reaction between Al2O3 and BaSO4 can produce Ba18Al12O36 and Al2SO4 during the friction and wear processes, which can effectively improve the tribological properties of the brake composites at elevated temperature. This research was contributive to the copper-free, metal-free and eco-friendly brake composites. [ABSTRACT FROM AUTHOR]

Cu-free resin-based brake material filled with waste foundry resin-bonded sand (waste sand) was prepared using the hot-pressing method. The changes in the physical and chemical properties of Cu and waste sand during braking were investigated, and their role in resin-based composites was discussed. The effects of the content of waste sand on the hardness, impact strength, indentation hardness, elastic modulus, friction coefficient, wear rate, micro-scratch friction coefficient, scratch depth, residual depth, and wear mechanism of resin-based brake material were investigated. Cu-contained composites generate Cu 2 O when braking at high temperatures, which adversely affects the friction and wear properties. Compared to Cu, waste sand was found to be more favorable for the overall friction and wear properties of resin-based composites. This suggests that waste sand can be used as a substitute for Cu in brake material. Waste sand is beneficial for improving the friction coefficient and stability of brake material through the formation of a friction layer. This layer can significantly impact the wear mechanism of brake material, particularly at high temperature (250–350 ℃). The brake material with 10–15% waste sand indicates excellent heat-fade resistance. • Waste foundry sand have been successfully replaced copper in brake material. • The role of waste foundry sand and copper in brake material were comparatively studied. • The effects of waste sand on mechanical and tribological properties of brake material were investigated. • The brake material containing 10–15% waste foundry sand show excellent heat-fade resistance. [ABSTRACT FROM AUTHOR]